Wicked Edge, need feedback.

[Mo-Dave]

Looking at the Wicked Edge knife sharpener and need feedback. Actually want reasons, other than the cost, as why I should not buy one. The theory behind it seems very practical and almost fool proof. If you have one please tell me your pros and cons if any, thanks.
Dave

[chad]

I've got a similar kit from "Smith", I think. I've found the stones too small for my large knives and always go back to my Chef's Choice and a steel. However, I have a belt sharpener coming for Christmas...I know because I bought it week before last and had CincHouse put it away. Belt sharpeners are used by the pros so I'm giving it a try.
Stones and such all get the job done and I know my info isn't helping you make up your mind...sorry! Sometimes you gotta buy and try!

I got my sharpener from Bass Pro Shop, but here's a link to Northern Tools...same sharpener and the price was about the same. They have a video to check out, too. http://www.northerntool.com/shop/too...1964_200431964

[NorthwestBBQ]

I own the Wicked Edge Pro Pac I. This is a quote of my first impressions of the system:

Originally Posted by NorthwestBBQ

I bought the Pro Pack I and all I can say is, it puts a Wicked Edge on a knife!











Slice a mushy Roma Tomato like deli meat...check!



Slice paper without any jagged edges...check!



Please don't try to feel with your fingers how sharp a Wicked Edge sharpened knife is - it will cut you like a scalpel!

It is seriously a great product.

[Novass]

seen alot of videos on you tube. if you put in the time you can split hair on a pocket knife. http://www.youtube.com/watch?feature...&v=BH6c4GnR9pc

[Mo-Dave]

Originally Posted by chad

I've got a similar kit from "Smith", I think. I've found the stones too small for my large knives and always go back to my Chef's Choice and a steel. However, I have a belt sharpener coming for Christmas...I know because I bought it week before last and had CincHouse put it away. Belt sharpeners are used by the pros so I'm giving it a try.
Stones and such all get the job done and I know my info isn't helping you make up your mind...sorry! Sometimes you gotta buy and try!

I got my sharpener from Bass Pro Shop, but here's a link to Northern Tools...same sharpener and the price was about the same. They have a video to check out, too. http://www.northerntool.com/shop/too...1964_200431964

Presently I have a belt sander converted to a sharpener, paper wheel sharpener, and a wet stone wheel with leather hone sharpener, and a couple lanskys. The Wicked Edge just seems a lot easier to use and more precise.
Dave

[Flat_Rate]

I am looking at a Wicked Edge but they have been backordered or out of stock for months now.

[Mo-Dave]

Originally Posted by NorthwestBBQ

I own the Wicked Edge Pro Pac I. This is a quote of my first impressions of the system:

I don't know how long you have had it and wonder if you would sill buy it again? I understand they had some issues with it at first but the Mfg., has addressed them and now have new arm and pivots available that takes a lot of the play out of them, which was the major complaint and the main reason I don't care for the Lansky. Saw a YouTube, were a guy put some thin washers on the pivots to tighten them up and another that put soda straws on the rods to help take some slop out of the stones.
Dave

[K80Shooter]

Originally Posted by Mo-Dave

Presently I have a belt sander converted to a sharpener, paper wheel sharpener, and a wet stone wheel with leather hone sharpener, and a couple lanskys. The Wicked Edge just seems a lot easier to use and more precise.
Dave

Which belt sander do you use? I have a 1x42 kalamazoo that I use and absolutely love it. With the right belts you can have a scary sharp knife in no time.

Also look at the edge pro. It's a nice looking tool also.

If you're really serious about sharpening knives check out this site http://www.knifeforums.com/forums/showforum.php?fid/48/ very informative.

[Mo-Dave]

Originally Posted by K80Shooter

Which belt sander do you use? I have a 1x42 kalamazoo that I use and absolutely love it. With the right belts you can have a scary sharp knife in no time.

Also look at the edge pro. It's a nice looking tool also.

If you're really serious about sharpening knives check out this site http://www.knifeforums.com/forums/showforum.php?fid/48/ very informative.

The belt sander is just a small delta I have turned the motor direction around on and added a 3 step pulley for different speeds and I have several grits and a leather belt but I don't use it enough and have to re learn each time. I am not as steady as I used to be and sometimes get a little careless, not a good thing with motorized equipment.
Dave

[foam2]

I have the wicked edge system with all the stones up to the 1600 grit ceramics, plus the leather strops. For v edge sharpening it can not be beat. For the most part I prefer a convex edge and use the belt sander to sharpen my knives. Once the convex edge is set the only real thing I do on the belt sander or the paddle strops is strop the edge to get it back to hair popping sharp. The maintenance on the convex edge is very easy and very little metal is lost to keep them that way. There is a learning curve no matter what system you choose but either will produce a sharp edge.

[Smokin' Gnome BBQ]

this looks pretty cool. here is my question, can a novice (me) pull this out of the box, read the instructions and use it with out destroying my knives. I would really have to ruin a Shun.

[K80Shooter]

Originally Posted by Smokin' Gnome BBQ

this looks pretty cool. here is my question, can a novice (me) pull this out of the box, read the instructions and use it with out destroying my knives. I would really have to ruin a Shun.

IMHO no one should try sharpening a Shun or any other good knife until you have learned how to sharpen.

Grab a couple of old knives or get something from a pawn shop to learn on, once mastered then move on to your good knives. As with anything it takes practice to master knife sharping.

[Cloudsmoker]

Just bought a Wicked Edge kit for Christmas - will report back un after the weekend.
But I found a great store which has them in stock now, nice kits with free shipping.

Oldawan Tools to Stay Sharp
http://www.oldawan.com

[Mo-Dave]

Originally Posted by K80Shooter

IMHO no one should try sharpening a Shun or any other good knife until you have learned how to sharpen.

Grab a couple of old knives or get something from a pawn shop to learn on, once mastered then move on to your good knives. As with anything it takes practice to master knife sharping.

I agree, I have a bunch of old knives bought from second hand stores I keep in a bucket and purposely dull them and practice resharpening every so often.
Dave

[NorthwestBBQ]

Originally Posted by Mo-Dave

I don't know how long you have had it and wonder if you would sill buy it again? I understand they had some issues with it at first but the Mfg., has addressed them and now have new arm and pivots available that takes a lot of the play out of them, which was the major complaint and the main reason I don't care for the Lansky. Saw a YouTube, were a guy put some thin washers on the pivots to tighten them up and another that put soda straws on the rods to help take some slop out of the stones.
Dave

I still like it but I want the new arms.