Brian O'Neal's Wooden Weber Handles

rcbaughn · 10-09-2012, 02:01 PM

How awesome do these handles look on the mini WSM and my Performer!!!! I can not stress how nice these handles are made. They are so smooth and the Weber logo burnt into the handle is amazing. They feel so nice when you pick the lid up and will hold up a heck of a lot better than those plastic ones that are probably just gonna fade and crack! And if these do end up getting left out in the weather..... It'll take 10 mins to put a new coat of polyurethane on them to make em look brand new!

Shout out to Brian though over at tvwbb.com, these things are absolutely amazing. When I figure out a way to get a nice smooth coat of black paint on the tamale pot, this thing will be my biggest pride and joy no doubt. If you wanna order some just go over there and give him a PM or do a Google search for "Brian O'Neal Wooden Handles" and you'll see the thread over on that site. Good stuff for sure and priced amazingly.

landarc · 10-09-2012, 02:33 PM

The wood adds a nice touch.

Vision · 10-09-2012, 02:34 PM

I've got one on an OTG and love it. No more hot handle.

BobBrisket · 10-09-2012, 02:47 PM

Our "Handles" go to guy is Marty Leach! Nice work too. And he's "local!" As in Brethren local.

http://www.bbq-brethren.com/forum/sh...ht=marty+leach

rcbaughn · 10-09-2012, 03:35 PM

Those are pretty but I prefer the factory handle look, but that's just me. Brian's pricing is a good bit lower to, big pro for a college guy on a budget.

caseydog · 10-09-2012, 03:43 PM

I have Brian's handles on my Webers, too.

Those looking for wood handles should look at both Brian's and Marty's. They both do good work -- they just look different.

CD

rcbaughn · 10-09-2012, 04:15 PM

Yes sir, different strokes for different folks!

10-09-2012, 02:01 PM	#1
rcbaughn Full Fledged Farker Join Date: 09-27-12 Location: Birmingham, AL Downloads: 0 Uploads: 0	Brian O'Neal's Wooden Weber Handles How awesome do these handles look on the mini WSM and my Performer!!!! I can not stress how nice these handles are made. They are so smooth and the Weber logo burnt into the handle is amazing. They feel so nice when you pick the lid up and will hold up a heck of a lot better than those plastic ones that are probably just gonna fade and crack! And if these do end up getting left out in the weather..... It'll take 10 mins to put a new coat of polyurethane on them to make em look brand new! Shout out to Brian though over at tvwbb.com, these things are absolutely amazing. When I figure out a way to get a nice smooth coat of black paint on the tamale pot, this thing will be my biggest pride and joy no doubt. If you wanna order some just go over there and give him a PM or do a Google search for "Brian O'Neal Wooden Handles" and you'll see the thread over on that site. Good stuff for sure and priced amazingly. __________________ Weber Spirit E-310, Weber Performer, Weber Smokey Joe, Mini-WSM, ECB Electric.

10-09-2012, 02:33 PM	#2
landarc somebody shut me the fark up. Join Date: 06-26-09 Location: San Leandro, CA Downloads: 0 Uploads: 0	The wood adds a nice touch. __________________ "perhaps...but then again...maybe not..." careful there son, those ribs are boiling hot... \_\|_/ (='.'=) Here there be bunnies... (")_(")ooo Pacific Rim BBQ Bob's Brew and Que

10-09-2012, 02:34 PM	#3
Vision is one Smokin' Farker Join Date: 09-11-11 Location: Baltimore, Maryland Downloads: 0 Uploads: 0	I've got one on an OTG and love it. No more hot handle. __________________ "It's all about the Hill Country brisket."

10-09-2012, 02:47 PM	#4
BobBrisket Moderator Join Date: 12-11-07 Location: El Paso, TX Downloads: 0 Uploads: 0	Our "Handles" go to guy is Marty Leach! Nice work too. And he's "local!" As in Brethren local. http://www.bbq-brethren.com/forum/sh...ht=marty+leach __________________ UDS, Pit Barrel Cooker-Courtesy of Poobah, WSM, 22.5 Weber Kettles-K and DR Stamped, 18.5 Weber Bar-B-Kettle, Weber 18.5 Smokey Joe Platinum, Weber Genesis Silver B, Lil' Chief Smoker, Lodge Sportman Grill, Backyard Fire Pit, Dutch Ovens, Discada Set Up, Turkey Fryer! BobBrisket Jr.-MUDS, WSJ Silver My BEST Compliment......"You're a good cooker, Dad!"--My Son. DAN!

10-09-2012, 03:35 PM	#5
rcbaughn Full Fledged Farker Join Date: 09-27-12 Location: Birmingham, AL Downloads: 0 Uploads: 0	Those are pretty but I prefer the factory handle look, but that's just me. Brian's pricing is a good bit lower to, big pro for a college guy on a budget. __________________ Weber Spirit E-310, Weber Performer, Weber Smokey Joe, Mini-WSM, ECB Electric.

10-09-2012, 03:43 PM	#6
caseydog somebody shut me the fark up. Join Date: 07-08-10 Location: Dallas, TX Downloads: 1 Uploads: 0	I have Brian's handles on my Webers, too. Those looking for wood handles should look at both Brian's and Marty's. They both do good work -- they just look different. CD __________________ 1995 Red Weber 22.5 Master's Touch with Cajun Bandit Rotisserie mod, 18.5 WSM with iQue 110, 18.5 OTG, Copper Smokey Joe Gold with Mini-WSM mod, Black Smokey Joe Platinum (Jumbo Joe) IMBAS Certified MOINK Baller. From hero to ZERO in just one week! Are you ready for a THROWDOWN?

10-09-2012, 04:15 PM	#7
rcbaughn Full Fledged Farker Join Date: 09-27-12 Location: Birmingham, AL Downloads: 0 Uploads: 0	Yes sir, different strokes for different folks! __________________ Weber Spirit E-310, Weber Performer, Weber Smokey Joe, Mini-WSM, ECB Electric.