|Our Homepage||Donation to Forum Overhead||Recipes||Smoke Signals Magazine||Welocme||Merchandise||Associations||Purchase Subscription||Amazon Affiliate|
|Gravity Fed smokers and Grills We are the inventors of these Gravity Fed Smokers and Grills. Innovative and efficient, these BBQ Grills and smokers can burn multi-fuel of charcoal, Wood Pellet, Wood Chunks, Wood Logs and reach temps of 300C or 572 F.|
|08-04-2012, 01:45 AM||#1|
is One Chatty Farker
Join Date: 03-29-11
Operation Manual on Remote Set of Tiger
Remote Set of Tiger
Press "on/off" button to turn on or off the power of the REMOTE SET
Press "AUTO" to select automatic mode or manual mode
When Manual model, press "+" or "-" to adjust speed of fan manually
Press "PIT" to program PIT temperature, time interval, H/L temperature Alarm
Press "MEAT" to program MEAT temperature, time interval.
Use "UP ^" or "DOWN V" buttons to inrease or decrease value
Press button of "C" or "F" to select your display
Press "UP ^" button, you will find window of Energy Management, press "DOWN V" button to SHADOW "Open", Press "UP ^" button to normal dispaly. then the remote set will be on battery saving mode. The power on remote set will be off a short time later and natutally the alarm will be disabled in remote set.
Press "UP ^" button, you will find window of Energy Management, press "DOWN V" button to SHADOW "Close", Press "UP ^" button to normal dispaly. then the remote set will be on all the time. Alarm will be activated.
Common Errors are mostly caused by
LOW voltage/Low Amps on the controller or the remote set
One buyer sent back WOLF. I check it and every thing is in good order.
Checking with buyer, he used a battery from a notebook. It is 12 VDC but only 500 ma. WOLF needs 2000 ma.
One buyer of Tiger reported no communication between remote set and the Tiger. I asked hm to check battery on the remote set. After changing new battery, it works!