Maverick ET-732

scottjess · 01-04-2012, 11:30 PM

Hi guys.

I was wondering if any of you have the Maverick ET-732; is this a good wireless thermometer? do you have any other suggestions?

Thanks for your insight.

NorthwestBBQ · 01-04-2012, 11:38 PM

I have an older model. This one looks better.

Soulman1282 · 01-04-2012, 11:57 PM

Got one for christmas. Used once so far and really liked it!

Sammy_Shuford · 01-04-2012, 11:59 PM

Just don't let water get in the probe end.

scottjess · 01-05-2012, 12:08 AM

Wouldn't moisture from the meat do the same as water?

Phrasty · 01-05-2012, 12:10 AM

Quote:

Originally Posted by Sammy_Shuford

Just don't let water get in the probe end.

I'm planning on getting one of these too... What part of the probe end do you mean Sammy? Where the braided wire meets the probe?

SirPorkaLot · 01-05-2012, 12:17 AM

I have both the older model
Maverick and the newer one. The only problem I have had with the probes, is I have to be careful not to pinch them with lids.

I imagine if you were to throw the probes and cables in a sink of water, then there may be issues, but I have had them out in some pretty heavy rains with no issues.

The older model maverick was not sealed where the probes connected to the outdoor transmitter, and there was some moisture issues there, but that was solved with the newer model.

NorthwestBBQ · 01-05-2012, 12:17 AM

Quote:

Originally Posted by Phrasty

I'm planning on getting one of these too... What part of the probe end do you mean Sammy? Where the braided wire meets the probe?

Yes, he does.

pwa · 01-05-2012, 12:22 AM

I love mine, been using it for a few months now.

pwa

mytmouz · 01-05-2012, 01:00 AM

No issues so far with mine...

Phrasty · 01-05-2012, 01:01 AM

Quote:

Originally Posted by NorthwestBBQ

Yes, he does.

Sammy_Shuford · 01-05-2012, 01:16 AM

Yes, that's what I said? There is a rubber seal that is not water proof. It fell in a pot of hot milk making yogurt.

scottjess · 01-05-2012, 01:51 AM

Looks like I will be ordering one of these then.
Thank guys :-) you are awesome.

scottjess · 01-05-2012, 02:08 AM

Quick question.

I have been reading some earlier reviews on the Maverick ET-732 and alot of people were having problems with the meat probs crapping out after a couple of smokes.
Do you know if this issue has been fixed by Maverick?

Replacement probes cost $20 and shipping to get to New Zealand is another $30 and I really cant see my self shelling out another $50 if the prob craps it's self soon after buying the unit.

thanks.

northwesto · 01-05-2012, 02:14 AM

I've done a dozen smokes with mine, no problems with the probes so far.

01-04-2012, 11:30 PM	#1
scottjess On the road to being a farker Join Date: 12-25-11 Location: Sparks, NV Downloads: 0 Uploads: 0	Maverick ET-732 Hi guys. I was wondering if any of you have the Maverick ET-732; is this a good wireless thermometer? do you have any other suggestions? Thanks for your insight. __________________ Proud Owner of a UDS & Kent double grill

01-04-2012, 11:38 PM	#2
NorthwestBBQ somebody shut me the fark up. Join Date: 06-28-09 Location: Lynnwood, WA Downloads: 0 Uploads: 0	I have an older model. This one looks better. __________________ Michael KCBS/PNWBA Member, Cook, CBJ & Photographer Custom Engraved Wine Barrel Lids

01-04-2012, 11:57 PM	#3
Soulman1282 On the road to being a farker Join Date: 11-15-11 Location: Springfield, MO Downloads: 0 Uploads: 0	Got one for christmas. Used once so far and really liked it! __________________ Justin Myrick, Chef, Eagle Scout, Char-Griller Pro Deluxe offset

01-04-2012, 11:59 PM	#4
Sammy_Shuford is One Chatty Farker Join Date: 05-17-09 Location: Summerville, SC Downloads: 0 Uploads: 0	Just don't let water get in the probe end. __________________ UDS, Brick Red Weber Performer Platinum, Blue 22.5 Weber Kettle Gold, Bradley Electric Purple Thermapen CBJ SCBA Carolina Pit Master

01-05-2012, 12:08 AM	#5
scottjess On the road to being a farker Join Date: 12-25-11 Location: Sparks, NV Downloads: 0 Uploads: 0	Wouldn't moisture from the meat do the same as water? __________________ Proud Owner of a UDS & Kent double grill

01-05-2012, 12:17 AM	#7
SirPorkaLot Babbling Farker Join Date: 08-31-09 Location: Antioch, CA Downloads: 0 Uploads: 1	I have both the older model Maverick and the newer one. The only problem I have had with the probes, is I have to be careful not to pinch them with lids. I imagine if you were to throw the probes and cables in a sink of water, then there may be issues, but I have had them out in some pretty heavy rains with no issues. The older model maverick was not sealed where the probes connected to the outdoor transmitter, and there was some moisture issues there, but that was solved with the newer model. __________________ Sir Porkalot aka John Back to back winner of the BBQ Brethren Throwdown with a pig leg and something funky CBBQA & KCBS member: Sir Porkalot BBQ Team NC & NorCal (Yes I stay confused) BLUE Thermapen Visit my website: http://www.sirporkalot.com

01-05-2012, 12:22 AM	#9
pwa is one Smokin' Farker Join Date: 10-11-11 Location: North Pole, Alaska Downloads: 0 Uploads: 0	I love mine, been using it for a few months now. pwa

01-05-2012, 01:00 AM	#10
mytmouz Full Fledged Farker Join Date: 10-09-11 Location: Pelahatchie MS Downloads: 0 Uploads: 0	No issues so far with mine... __________________ I LUV to smoke 'em... Webber knock off Charbroil gasser And 2 UDS go to set ups...

01-05-2012, 01:16 AM	#12
Sammy_Shuford is One Chatty Farker Join Date: 05-17-09 Location: Summerville, SC Downloads: 0 Uploads: 0	Yes, that's what I said? There is a rubber seal that is not water proof. It fell in a pot of hot milk making yogurt. __________________ UDS, Brick Red Weber Performer Platinum, Blue 22.5 Weber Kettle Gold, Bradley Electric Purple Thermapen CBJ SCBA Carolina Pit Master

01-05-2012, 01:51 AM	#13
scottjess On the road to being a farker Join Date: 12-25-11 Location: Sparks, NV Downloads: 0 Uploads: 0	Looks like I will be ordering one of these then. Thank guys :-) you are awesome. __________________ Proud Owner of a UDS & Kent double grill

01-05-2012, 02:08 AM	#14
scottjess On the road to being a farker Join Date: 12-25-11 Location: Sparks, NV Downloads: 0 Uploads: 0	Quick question. I have been reading some earlier reviews on the Maverick ET-732 and alot of people were having problems with the meat probs crapping out after a couple of smokes. Do you know if this issue has been fixed by Maverick? Replacement probes cost $20 and shipping to get to New Zealand is another $30 and I really cant see my self shelling out another $50 if the prob craps it's self soon after buying the unit. thanks. __________________ Proud Owner of a UDS & Kent double grill

01-05-2012, 02:14 AM	#15
northwesto Got Wood. Join Date: 04-23-11 Location: Puyallup, WA Downloads: 0 Uploads: 0	I've done a dozen smokes with mine, no problems with the probes so far.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Maverick ET-732	steve6402	Q-talk	4	12-03-2011 09:05 AM
Please help with Maverick ET-732	Oldpro1946	Q-talk	4	11-06-2011 09:04 AM
Maverick ET-732	jmill88	Q-talk	22	10-06-2011 08:57 PM
Used the New Maverick ET-732	Pappy	Q-talk	55	07-19-2011 09:09 PM
Maverick ET-732	bluenote07	Q-talk	5	07-03-2011 07:41 PM