P
Paul Worth
Guest
The tire valve stems are sold in pairs for about $5 around here. Just remove the actual valve and the turkey fryer thermometer is a perfect fit.
-
working on DNS.. links may break temporarily.
Ugly Drum Smoker
- Thread starter jgh1204
- Start date
N
NU2QN
Guest
Started Build on Tuesday, Cooking on Sunday
I started building my UDS on Tuesday after work. I had it 75% complete an seasoned by Thursday night planning on a lot of cooking for the weekend. The wife pulled the "I want to go to the coast" card on me Friday morning. So much for smoking. However I didn't miss out on the food. Mo's Authentic Hickory Pit BBQ in Pismo beach has some of the best Pulled Pork Sandwiches. We got home early enough on Saturday for me to get the few things I needed to complete the UDS and Boston Butt for a trial run on Sunday. Everything turned out great. I took some picture of the finished product that i will post later. Here are some pics of my UDS.
View attachment 60002
View attachment 60003
View attachment 60004
View attachment 60005
View attachment 60006
View attachment 60007
View attachment 60008
Thanks for all the input on this sight. Very helpful!!!
I started building my UDS on Tuesday after work. I had it 75% complete an seasoned by Thursday night planning on a lot of cooking for the weekend. The wife pulled the "I want to go to the coast" card on me Friday morning. So much for smoking. However I didn't miss out on the food. Mo's Authentic Hickory Pit BBQ in Pismo beach has some of the best Pulled Pork Sandwiches. We got home early enough on Saturday for me to get the few things I needed to complete the UDS and Boston Butt for a trial run on Sunday. Everything turned out great. I took some picture of the finished product that i will post later. Here are some pics of my UDS.
View attachment 60002
View attachment 60003
View attachment 60004
View attachment 60005
View attachment 60006
View attachment 60007
View attachment 60008
Thanks for all the input on this sight. Very helpful!!!
Last edited by a moderator:
C
crappiemike
Guest
I just made 4lbs. of jerky on my uds,cut a rump roast into 1/4 inch strips and seasoned and refrigerated overnight.Used two racks one upside down on the other to hold the strips and smoked for four hours at 150 to 165 degrees.Had to have my 2inch single air intake almost totally closed to maintain the temp....The handles on the upside down rack holds it about 2 inches above the lower rack..
Lawdog's Smokewagon
Well-known member
I used regular Rustoleum thinned with 15% acetone and sprayed 2 coats. It has held up perfectly. I used a magnectic Alabama Logo on the front and it has done fine too. I know a few on here have done the vinyl wrap for more elaborate looks. And they seem to work good.
Attachments
El Ropo
Quintessential Chatty Farker
I hope you burned out the dreaded red liner inside that drum! :doh::tape:
cgaskell65
Found some matches.
First UDS complete...thanks to this forum. 3 intake valves with 3/4" black pipe nipples with ball valves on each. 1 exhaust on lid is 2" bung hole with 8" pipe (also have a 12" pipe that i can switch out). Charcoal ring is a replacement grate for 22.5 Weber with 3/4" #9 expando bolted and tied to grate with SS wire. Charcoal ring sits 3 inches off bottom of drum on 4.5" tap screws (too long but oh well) with an 18" aluminum pizza pan 1" off the bottom of drum and 2" below charcoal grate. Messed around with temp control on seasoning run and still looking for that perfect spot to be able to walk away for hours (iQue110????).
Attachments
N
NU2QN
Guest
Yes I did. It took about an hour to wire wheel it off and what a messy job that was. I took a picture of myself after I got done. Smokes Good. Great temp control.
Sammy_Shuford
is Blowin Smoke!
Nice drum!
kevine
Full Fledged Farker
Big Bears BBQ
is Blowin Smoke!
That drum is looking pretty sweet, how tall is it ???????
cgaskell65
Found some matches.
vafish
Full Fledged Farker
Thanks for a great idea.
I just had to buy a new.valve stem for my trailer and 2 came in the package.
P
Paul Worth
Guest
I can't take credit for the valve stem idea. It is buried in the 600+ pages of this thread somewhere. I read the whole thing (500+ pages at the time) taking lots of notes before starting my first UDS. I'm working on UDS #5 now and they all work fine. I did come up with using the upside-down basket for grilling on my own, although others are probably doing something similar. Just remember the KISS principle your first UDS. The original design works very well.
vafish
Full Fledged Farker
I thought I had read the entire thread as well. Did not male written notes, just mental ones.
Right now I just stick the turkey fryer thermometer through a small hole and use the clip that came with it to hold it in place. I think the valve stem would give it some more support.
Big Bears BBQ
is Blowin Smoke!
I see that most drums are about 35" tall but I'm starting to look around for one that is 39" tall I seen one advertised somewhere. I'm thinking the 4 extra inches would help on briskets and pork butt loaded up on the drum ....
coewar
Knows what a fatty is.
To get that height, you can either find a dome lid and fit it, or get another barrel and cut it to create a lid that's maybe 12 inches tall that would add extra height. Or that cut up barrel you'd leave the top and bottom open and use the lid on top of it so it's just like an extension. This is what I'd like to do if I get OK at cutting and have a spare barrel.
Big Bears BBQ
is Blowin Smoke!
I was thinking it would make a difference having a couple more inches and you want to make sure the lower rack is high enough above the coal basket but I may have to find a couple of weber lids. I'd like to have to UDS so I'll have to start looking .......
coewar
Knows what a fatty is.
I think the height is OK if you keep the heat low enough. That means your exhaust shouldn't be "too good".. meaning a single 2 inch pipe is causing for a bit more draft than needed. You need to keep a similar circular area but if you split it up into say 4 one inch holes, or two 1.5 inch holes on the side, you'll be able to keep that fire a bit lower.
However having a way to diffuse the heat below also works very well, but make sure to still allow that meaty goodness to drip into the fire.
I use angle iron pieces laid down on a grill grate and it's working great.
However having a way to diffuse the heat below also works very well, but make sure to still allow that meaty goodness to drip into the fire.
I use angle iron pieces laid down on a grill grate and it's working great.
vafish
Full Fledged Farker
Did you get your barrel from a guy near Purceyville that advertises on CL?
cgaskell65
Found some matches.
i almost did get one from the guy in Purcellville. I made contact with him and asked if he had one unlined. He hit me back a couple of days later and said he "thought" he had one. In those couple of days of waiting I found Bock Drum company in Norfolk, VA who sells new unlined drums for $70. My dad lives close, drove over and picked it up for me and then i grabbed it when we went to my parents' for Christmas. New for $70 vs. used for $40, so I went with the new. There is another drum co. in Baltimore that sells new unlined as well. If he did have a food grade one unlined I would probably buy one from him but from hearing the stories on here about getting the liner out it was worth the extra $30.
