|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
04-08-2007, 01:25 PM | #1 |
somebody shut me the fark up.
Join Date: 05-24-04
Location: Long Beach, CA
|
Bigmista Balcony Barrel Smoker II
Bentley and I had a great time working on the new Barrel Smoker. I showed up at Bentley's place at about 9am with my nice green barrel, some hardware that Norcoredneck picked up for me and a pallet that I got for free from an auto body shop around my house.
When I got out to Bentley's, we decided the the best plan was to burn the paint out of the inside of the barrel first. Bentley pulled out the chainsaw and cut the pallet into pieces and despite his sister's reservations we started a fire in the barrel. It was interesting how the paint on the outside burned off. Looked like a Jamaican Fire Barrel. Well as the fire was burning good and hot and the paint was starting to come off in the bottom of the barrel, we heard fire engines in the distance. Bentley's sister, not in the mood for a $5000 fine, made us put the fire out. Of course when we hit the fire with a hose, it sent up a big plume of steam which freaked her out even more. Ironically, the fire engines weren't even coming in our direction but there was no way she was going to let us start another fire so we moved on to plan B, the wire brush. This slowed us down a bit but after an hour or so with Bentley's head stuck in the barrel (I did some too!) we got most of the paint out of the inside. In the meantime Bentley was working on a small catering job. I thoughtfully brought a small token of my brethren appreciation. This is Bentley rolling a double fatty... The Traeger was chugging along... Next we got to work drilling holes for the bolts that would hold the grates and the airflow valves. We went with Norco's idea of using pipe fitting for the air intake. I couldn't find a 30 gallon drum to use for an ash pan so I came up with the idea of using a terra cotta flower pot saucer to catch the ashes. The charcoal basket became the bane of our existence. Our plan was to go to a metal shop and buy some expanded metal and fabricate one. Who know that all of the metal shops were closed the day after Good Friday? We couldn't find anything open and home depot was too expensive. We found some sheet metal that was thin enough to bend but it was also too thin to weld. Bentley eventually found some scrap around his place and we pieced together a charcoal box. We had a great lunch with the family of baby backs, cole slaw, fruit salad, beans, biscuits and choco cake. By this time we were too tired to add the handles and paint it but I figure I can handle that. It'll make me feel like I had something to do with the construction. Thanks Bentley for all of your help! I really appreciate it!
__________________
Wait! Bigmista wrote a cookbook? Rec Tec RT-700 Bull Pitmaker Vault Remembering Scott |
|
04-08-2007, 01:34 PM | #2 |
is One Chatty Farker
Join Date: 08-24-06
Location: Kokomo,Indiana
|
Lookin Good Mista.....Cant wait to see the finished Product !!
What is the spacing on the Cooking Grates?...Bottom Grate from fire and distance between them...if ya dont mind my asking...and the top Grate from the top of drum?
__________________
Chargriller Akorn Drum Smoker " Old Smokey " Work in Progress Kingsford Premium Charcoal Grill Weber Gasser Genesis Silver A Pit Barrel Cooker Maverick ET-732 VietNam Veteran US Navy May you Sleep in Peace always...and Please....Thank a Veteran for That Privilege!! Last edited by Oldbob; 04-08-2007 at 01:38 PM.. Reason: had a few questions |
|
04-08-2007, 01:44 PM | #3 |
Babbling Farker
Join Date: 03-14-07
Location: Culpeper, Virginia
|
Neil is a good apprentice! I will work with him anytime, Man for somthing so simple, a Fattie is Outstanding!
Neil, did you do the second burn? Did it knock out that remaining paint?
__________________
Certified Master Judge #5382 What is best in life? "To crush your BBQ opponents, to see them driven before you, and to hear the lamentations of their women." |
|
04-08-2007, 01:50 PM | #4 |
Babbling Farker
Join Date: 12-02-05
Location: Ky
|
Nice post Mista.......keep us updated!!
__________________
__________________ --------------------------------------------------- Chargriller Pro with mods El Cheapo Brinkman Some name I can't remember Gasser Oil Less Turkey fryer |
|
04-08-2007, 02:30 PM | #5 |
Quintessential Chatty Farker
Join Date: 09-18-06
Location: Hurricane Deck Missouri
|
It looks good but for any future barrel burnouts you may do, I have two words, weed burner. It will burn both inside and out just by burning the outside, much faster and will not attract the fire department. but it will still probably scare the bejesus out of your sister. ;-)
Dave |
|
04-08-2007, 03:42 PM | #6 |
somebody shut me the fark up.
Join Date: 05-24-04
Location: Long Beach, CA
|
The top grate is about 5.5 inches from the top. The second grate is about the same distance below that.
__________________
Wait! Bigmista wrote a cookbook? Rec Tec RT-700 Bull Pitmaker Vault Remembering Scott |
|
04-08-2007, 03:46 PM | #7 | ||
somebody shut me the fark up.
Join Date: 05-24-04
Location: Long Beach, CA
|
Quote:
Quote:
__________________
Wait! Bigmista wrote a cookbook? Rec Tec RT-700 Bull Pitmaker Vault Remembering Scott |
||
|
04-08-2007, 04:07 PM | #8 |
Babbling Farker
Join Date: 08-20-05
Location: Indio Ca.
|
Neil is this yours or Bents?
See you at the Autry
__________________
Catering, Contests, and Community Service Team What Wood Jesus Que? Www.bbqthom.com Last edited by ThomEmery; 04-08-2007 at 07:44 PM.. |
|
04-08-2007, 04:27 PM | #9 |
Quintessential Chatty Farker
Join Date: 12-05-03
Location: Mt Carmel IL
|
Good name for the UDS when Complete. "Yours of Bents" Has a ring to it.
__________________
Former Texan Former New Englander Former Husband :-) |
|
04-08-2007, 04:49 PM | #10 |
Babbling Farker
Join Date: 03-14-07
Location: Culpeper, Virginia
|
That was what I wanted to do but neither one of us had a propane tank.[/quote]
Since nither of us has a propane tank does that make us real Q'ers?
__________________
Certified Master Judge #5382 What is best in life? "To crush your BBQ opponents, to see them driven before you, and to hear the lamentations of their women." |
|
04-08-2007, 05:01 PM | #11 |
Babbling Farker
Join Date: 01-28-07
Location: Melbourne, FL
|
Lookin Good. Keep us updated....with pics of course!!
|
|
04-08-2007, 05:20 PM | #12 |
somebody shut me the fark up.
Join Date: 05-24-04
Location: Long Beach, CA
|
It's mine thom.
__________________
Wait! Bigmista wrote a cookbook? Rec Tec RT-700 Bull Pitmaker Vault Remembering Scott |
|
04-08-2007, 06:57 PM | #13 |
is One Chatty Farker
Join Date: 06-08-06
Location: Upstate South Carolina
|
Just a word about the flower pot saucer....... I have one that is upside-down that I put my chimney starter on and one day I let the chimney sit burning for longer than usual and the thing cracked open completely across it.
So it may not survive a full charcoal basket burning for many hours.
__________________
Chargriller Super Pro with a big ol rust hole and a mouse nest ------ Nothing in life is to be feared, it is only to be understood --saying in a fortune cookie-- |
|
04-08-2007, 07:07 PM | #14 |
somebody shut me the fark up.
Join Date: 05-24-04
Location: Long Beach, CA
|
Thanks for the heads up. I'll keep an eye out for that.
__________________
Wait! Bigmista wrote a cookbook? Rec Tec RT-700 Bull Pitmaker Vault Remembering Scott |
|
04-08-2007, 07:47 PM | #15 |
Babbling Farker
Join Date: 08-20-05
Location: Indio Ca.
|
I have two BDS there is no pan in the bottom
Yes its helps clean up but one could go without it
__________________
Catering, Contests, and Community Service Team What Wood Jesus Que? Www.bbqthom.com |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A Double Barrel Smoker... and a thank you. | rip1797 | Q-talk | 6 | 07-25-2011 10:24 PM |
Introducing the Bigmista Board Smoker | Bigmista | Q-talk | 31 | 04-10-2011 09:44 AM |
First cook on homemade Bigmista balcony smoker clone | Norcoredneck | Q-talk | 68 | 06-24-2009 11:23 AM |
|
|