UDS Building Class - Saturday - Page 2

Forney · 06-25-2008, 07:10 PM

If I didn't have to work I'd be there! Awesome Idea!!!

txschutte · 06-25-2008, 07:22 PM

Wyatt will be doing something similar at the Chili Cookoff. Except on Fox TV.
Building the smoker right in front of everyone, then placing it in the raffle.

Geez, Bob. You're like the Gene Simmons of the BBQ World, aren't ya?? If I can make money from it, I'm doin' it. WTG!!

Spydermike72 · 06-25-2008, 07:27 PM

Quote:

Originally Posted by txschutte

Geez, Bob. You're like the Gene Simmons of the BBQ World, aren't ya?? If I can make money from it, I'm doin' it. WTG!!

That is funny!!

Patrick's BBQ · 06-25-2008, 08:28 PM

Considering that I just lost my job and that I now have oodles of free time, Im in!!!!

Bob, I'll need directions my man.

You gonna havae some of that tasty burbon that you were chatting about?

Norcoredneck · 06-25-2008, 08:57 PM

Bourbon and powertools! Need webcam. Oh and firstaid kit.

Bbq Bubba · 06-25-2008, 10:48 PM

Quote:

Originally Posted by Patrick's BBQ

Considering that I just lost my job and that I now have oodles of free time, Im in!!!!

Bob, I'll need directions my man.

You gonna havae some of that tasty burbon that you were chatting about?

I thought it was at the same place where you got your Brethren nickname.....

Quote:

Originally Posted by Norcoredneck

Bourbon and powertools! Need webcam. Oh and firstaid kit.

No Pat, that was last week..........

chinesebob · 06-26-2008, 12:05 AM

Quote:

Originally Posted by Patrick's BBQ

Considering that I just lost my job and that I now have oodles of free time, Im in!!!!

Bob, I'll need directions my man.

You gonna havae some of that tasty burbon that you were chatting about?

I think it's at the Hillsboro Vineyard church. Curt set the location up. We're kicking it off at 8:30AM or something like that.

06-26-2008, 06:18 AM

I wish I was able to make this but if you have another one of these real soon I would love to attend because I am dying here. I want to build my own smoker but have limited funds right now (wedding being planned) and I am a machinist by trade so I am sure I can handle the work.

I need a smoker ASAP because going out every week to some place to buy Q is making me broke but I have to have the stuff!

chinesebob · 06-26-2008, 07:50 AM

Quote:

Originally Posted by StayDown

I wish I was able to make this but if you have another one of these real soon I would love to attend because I am dying here. I want to build my own smoker but have limited funds right now (wedding being planned) and I am a machinist by trade so I am sure I can handle the work.

I need a smoker ASAP because going out every week to some place to buy Q is making me broke but I have to have the stuff!

Put a case of beer in the frig, sit down and read through the UDS thread. My class is getting them built for about 80.00 - but if you're a machinist you can probably put together an easier and cheaper one.

Oh and by the time you're finished drinking the case of beer you'll finish the uds thread.

06-26-2008, 07:56 AM

Quote:

Originally Posted by chinesebob

Put a case of beer in the frig, sit down and read through the UDS thread. My class is getting them built for about 80.00 - but if you're a machinist you can probably put together an easier and cheaper one.

Oh and by the time you're finished drinking the case of beer you'll finish the uds thread.

I saw that thread and man is it overwhelming. I would still not be opposed to taking your class and making one so I have the basics down beofre I go and use my welding and machining skills to try and make an even better one (not saying yours is not great)

Where does one start when looking for a drum??

Pyle's BBQ · 06-26-2008, 09:21 AM

SD, here is a link to craigslist. This is a search for "55 gal" in the Dayton area. You can expand your search or see if CB has any extra.

06-26-2008, 09:32 AM

Quote:

Originally Posted by Pyle's BBQ

SD, here is a link to craigslist. This is a search for "55 gal" in the Dayton area. You can expand your search or see if CB has any extra.

I might be crazy but I don't see a link?

STX Cue · 06-26-2008, 02:40 PM

I think I would try Dayton Industrial Drum, but that's just me...

http://www.daytonindustrialdrum.com/id1.html

And that monster thread actually boils down to about three pages of really important stuff, and the rest is some really good stuff that makes for some neat options...shelves, bottle openers, and the like.

DavidEHickey · 06-26-2008, 03:26 PM

I also was going to suggest Dayton Industrial Drums. I've bought lots of drums from them for environmental projects we have had. Its Basically at the corner of Smithville and Springfield Street. Matter of fact I was 100' away from them today while looking at a project. I think they clean the refurbished ones out and sell them fairly cheap. Can't remember but they were not expensive.

Just Pulin' Pork · 06-26-2008, 03:31 PM

Post pictures if you can. Would love to see how it turns out. Great idea by the way!

06-25-2008, 07:10 PM	#16
Forney is one Smokin' Farker Join Date: 04-25-07 Location: Salem, Ohio	If I didn't have to work I'd be there! Awesome Idea!!! __________________ Eric Salem, Ohio Perry Lodge #185, F&AM ([I]Dean Gerber Award[/I]) [I][B][FONT=Comic Sans MS]GO MEAT!![/FONT][/B][/I]

06-25-2008, 07:22 PM	#17
txschutte Quintessential Chatty Farker Join Date: 08-02-07 Location: Cozad, Nebraska	Wyatt will be doing something similar at the Chili Cookoff. Except on Fox TV. Building the smoker right in front of everyone, then placing it in the raffle. Geez, Bob. You're like the Gene Simmons of the BBQ World, aren't ya?? If I can make money from it, I'm doin' it. WTG!! __________________ "Bring it on, you bananna thong wearing killer of brisket!"-Chambers If you really care about this place, you'll show some respect for it. Your beard is so stupid, it took two hours to watch 60 Minutes.

06-25-2008, 08:57 PM	#20
Norcoredneck somebody shut me the fark up. Join Date: 07-11-06 Location: Norco, Ca.	Bourbon and powertools! Need webcam. Oh and firstaid kit. __________________ *Low and Slow.....* *The Prontologist is in...* *Ok let's see your Butt!*

06-26-2008, 09:21 AM	#26
Pyle's BBQ Babbling Farker Join Date: 10-25-06 Location: Madrid, IA	SD, here is a link to craigslist. This is a search for "55 gal" in the Dayton area. You can expand your search or see if CB has any extra. __________________ Bryan, Team: Pyle's BBQ Yoder YS640; Good-One "Trail Boss" 60T; Weber Kettle rotisserie ring; Big A$$ Rotisserie; New Braunfels offset smoker; Weber Smokey Mountain; Backyard Bombers BBQ HJM Μολὼν λαβέ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pizza on BGE Demo Class this past Saturday (many pics)	SmokinGuitarPlayer	Q-talk	30	06-10-2011 10:57 AM
Judging Class O'Fallon, Mo Saturday August 7 with Table Captain Class!	stlgreg	Competition BBQ	3	08-02-2010 10:04 PM
Building my new UDS!	bamaman76	Q-talk	8	01-16-2010 11:27 AM
Building a UDS	Dr. Trout Bum	Q-talk	15	12-24-2008 05:34 PM

06-25-2008, 08:28 PM	#19
Patrick's BBQ On the road to being a farker Join Date: 05-18-08 Location: Beavercreek, OH	Considering that I just lost my job and that I now have oodles of free time, Im in!!!! Bob, I'll need directions my man. You gonna havae some of that tasty burbon that you were chatting about?

06-26-2008, 06:18 AM	#23
StayDown Guest	I wish I was able to make this but if you have another one of these real soon I would love to attend because I am dying here. I want to build my own smoker but have limited funds right now (wedding being planned) and I am a machinist by trade so I am sure I can handle the work. I need a smoker ASAP because going out every week to some place to buy Q is making me broke but I have to have the stuff!

06-26-2008, 02:40 PM	#28
STX Cue Full Fledged Farker Join Date: 04-03-08 Location: Schertz, TX	I think I would try Dayton Industrial Drum, but that's just me... http://www.daytonindustrialdrum.com/id1.html And that monster thread actually boils down to about three pages of really important stuff, and the rest is some really good stuff that makes for some neat options...shelves, bottle openers, and the like.

06-26-2008, 03:26 PM	#29
DavidEHickey Full Fledged Farker Join Date: 04-22-08 Location: Wilmington, Ohio	I also was going to suggest Dayton Industrial Drums. I've bought lots of drums from them for environmental projects we have had. Its Basically at the corner of Smithville and Springfield Street. Matter of fact I was 100' away from them today while looking at a project. I think they clean the refurbished ones out and sell them fairly cheap. Can't remember but they were not expensive.

06-26-2008, 03:31 PM	#30
Just Pulin' Pork is one Smokin' Farker Join Date: 03-08-08 Location: Overland Park Kansas	Post pictures if you can. Would love to see how it turns out. Great idea by the way!