Yet another UDS suitability question...

K

kcchiefdav

Knows what a fatty is.
Joined
May 3, 2010
Messages
114
Reaction score
11
Points
0
Location
Wichita, KS
First a couple of apologies
1. I originally posted this in the UDS master-thread, but because of potential time constraints, I'm starting a new post so I can get more eyeballs (and hopefully opinions.
2. I apologize for being like the 500th person to ask this question. On with the business at hand...

So, in the short time that I've been a member here, I've fallen in love with the UDS.(And I hate my ECB) A few weeks ago, I decided that I must try making one. I have come across some barrels and I wanted to run them by some of you, who are more "in the know" on these sorts of things, as to whether or not these types of barrels are gonna work for a UDS. The guy advertised them as barrels used to ship sand and aggregate which seems ok to me. They don't appear to be galvanized. So, what do you guys think, should i make the 12 dollar investment and give this thing a try or wait til I can find something more food friendly?

3n03m63l45y55x05r2a5daa.jpg


3k53mc3l65w15u55x2a5dd9.jpg
 
I made my UDS from drums that had pretrolium and some time of alcohol in them. I would go for it. Just make sure to burn them out really well a couple times. Do they come with lids?
 
WHo ships sand in a barrel? Was it sand removed from a chemical or nuclear spill site? Everyone has to do what they feel comfortable with, but personally, I would need more information about the sand and the "aggregate."

Roadside barrels used by road construction crews hold sand to keep them in place. Were they used for something like that?
 
I would burn them real good take a wire wheel and a drill and grind them out and build. Have fun
 
Boshizzle said:
WHo ships sand in a barrel? Was it sand removed from a chemical or nuclear spill site? Everyone has to do what they feel comfortable with, but personally, I would need more information about the sand and the "aggregate."

Roadside barrels used by road construction crews hold sand to keep them in place. Were they used for something like that?
Click to expand...

I asked the guy for more info about the barrels' past uses and haven't heard back from him yet. I'm in the middle of Kansas, and I can't really think of any dubious types of sand or rock that they guy could have received in these barrels, so I'm pretty hopeful.
 
burn and scrub burn and scrub if you see rust you should be good. I used barrels that held road paint, so sand should be no problem.

PS Plus if they have lids and only cost ya $12 you can do other things with them .... I would buy them even if i didn't want to make a 5-6th UDS
 
That first black one with the shiny interior looks perfect for a UDS build... No liner! do they smell like chemicals? That is a good price for a drum with removable lid...

Drill the lower intake holes first, then rinse / scrub and start a brush fire to clean 'er up....
 
I say go for it. If anyone put nuclear waste of anything in them, they wouldn't be empty right now. They'd be buried under a mountain somewhere. Nuclear waste isn't something you can just dump out on the side of the road...

As for the aggregate/sand; it might have been the kind they use for making molds of for sand-blasting. That's the only thing I can think of. See what it says on the labels when you go to get them.
 
I made mine out of an oil drum, hit it with a powerwasher before and after I burned it out. There wasn't any residue or odor left. I'd say go for it.

Just wanted to note that our wash bay at work has an oil separator built into the drain, as do most commercial car washes.
 
That front one with the shiney insides is perfect! Won't even take much burning. Soap and water it first, drill your 3 or 4 intake holes, start a fire and get it hot and start building. No need for wire brushing since there is no liner.
 
You must log in or register to reply here.

Similar threads

P
My UDS in Progress
2
Replies
25
Views
1K
PhredS
P
fat_bastard
What is the current Smoker Du'Jour
Replies
16
Views
1K
bschoen
B
T
UDS / CAC Clone???
Replies
16
Views
1K
txsmkmstr
T
Headgear
Pit Seasoning Question
Replies
15
Views
4K
cayenne
cayenne
D
Any advice for beef “blade “ roast for pulling?
Replies
6
Views
540
Debmar
D
Back
Top