|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
07-10-2012, 09:34 AM | #9736 |
Knows what a fatty is.
Join Date: 03-15-12
Location: The Colony, Texas
|
Got mine at walgreens for $6.00 and was up North last week saw them in meijer I think. Look around you will find these in the least expected places like grocery & drug stores. If you find one for more than $10 for them you need to move on.
|
|
07-10-2012, 09:53 AM | #9737 | |
Full Fledged Farker
Join Date: 06-30-12
Location: MOntpelier,OH
|
Quote:
Dollar general too maybe....but that is pretty close to what I got at Walmart, the walmart one had a fancier tripod base to throw away ;-), and it's grill was more of the straight across that will orient at 90 degrees to form squares if that is what you want. I just drilled a slew of 1/2" holes in my 1" tall lip. Bill |
|
|
07-10-2012, 11:17 AM | #9738 |
Quintessential Chatty Farker
Join Date: 10-06-10
Location: Austin, TX
Name/Nickname : Roger
|
Ace hardware has those same grills for $4.99, free ship to store option if they aren't in stock.
__________________
22.5" WSM nicknamed Fuel Hog! Rescued 22.5" OTS. 18.5" OTS. SJS Mini-WSM. Building UDS ver 2.0. HEB briqs (rebranded Royal Oak). Pecan/Hickory/Cherry/Apple/Peach woods. 2016 Fuji Absolute 2.0 LE (for burning off all the great BBQ) |
|
07-10-2012, 11:36 AM | #9739 |
Full Fledged Farker
Join Date: 06-30-12
Location: MOntpelier,OH
|
I got bold and cut the top rim from my drum, partially because the flat lid I found would nit fit INSIDE it, and probably a Weber or other dome lid would not fit OUTSIDE it. And fired off another test burn. Wanted to have more solid experience before I throw $30 worth of brisket on it :-). I placed this pampered chef stone on the lower rack and checked the temp 5" above it, and right below it.
Running with just the 3/4 ball valve open and around 8lbs of RO lump in the basket. 375f below, 250f above it. I did check both my short and long thermo's the other day in boiling water and they are right on the money around 212. That stone I made the mistake of "seasoning" it with canola oil, basically ruined it unless I can find a person with a pottery kiln to refire it, we do not have a self cleaning over either, people have reported cleaning them in one. |
|
07-11-2012, 08:42 AM | #9740 |
Full Fledged Farker
Join Date: 06-30-12
Location: MOntpelier,OH
|
This is weird (to me anyway hehe). I lit off the UDS yesterday in the morning, I think it was 10 am or so, loaded the fire basket and dropped a full lit chimney of lump on top. Closed it up, ran it a bit with all the air ports open, plugged them one at a time til I was down to just the ball valve. It was running 225-250. Left for work, came home at 1045pm and looked out, it was at 200. Figuired it had tapered down and was done.
So at 9am I look out this morning, nearly a full 24 hours, and it is at 250 ?? HUH ?? Pulled the lid and heck only about half the lump had burned, I hit it with forced air from a small shop vac and the coals were burning all through the pile of remaining lump. So I closed it back up and went to readjusting the air. I had this one bag of lump, not sure where I got it, but the bag is a different color than the "normal" RO lump I have gotten other places/times. Bill |
|
07-11-2012, 10:21 AM | #9741 |
On the road to being a farker
Join Date: 01-31-09
Location: Austin, Texas
|
Used the cheep tabletop grill and a pizza pan as ash trays - preferred the pizza pan as I think I get better air flow.
|
|
07-11-2012, 11:45 AM | #9742 |
Full Fledged Farker
Join Date: 06-30-12
Location: MOntpelier,OH
|
Playing around with the long thermometer, putting it in at 90 degrees to the barrel without the stone in there shows about 25f hotter than sticking it straight down from the top to about the same location. So the higher temp from 90 degree orientation must be because more surface area is exposed to radiant heating from below ?
|
|
07-11-2012, 11:59 AM | #9743 |
Knows what a fatty is.
Join Date: 05-21-12
Location: Long Island, NY
|
Hey everyone. I am about to begin my UDS build and will keep you all updated with photoes. I bought a drum with the orangish liner in it and just had someone sandblast the inside and outside of it for $75.00
I read most of the pages on this thread, was just wondering if anyone recommends a certain build plan thats most popular for the UDS, or are they pretty much all the same? Is it worth just buying a kit with the basket, thermometer, handle and everything or is that much more money that way? Thanks |
|
07-11-2012, 02:15 PM | #9744 |
On the road to being a farker
Join Date: 02-16-11
Location: Jacksonville, FL
|
I am starting to path to my first UDS build. Found a place downtown that sells new unlined 55 gallon drums for $70. Decided to go that route instead of dealing with the liner in a food grade barrel.
|
|
07-11-2012, 10:33 PM | #9745 | |
Full Fledged Farker
Join Date: 06-30-12
Location: MOntpelier,OH
|
Quote:
And on the unlined drum, probably well worth it to not have to burn epoxy from the inside :-). |
|
|
07-12-2012, 09:10 AM | #9746 |
On the road to being a farker
Join Date: 01-31-09
Location: Austin, Texas
|
Not sure what is in the "kit". I bet I could come up with $120 of stuff if I tried, but that does not mean it is all in the kit. Normal stuff would be 3 1/4" bolts, 3 1/4" nuts, 3 1/4" acorn nuts, possibly 6 1/4" washers, a Weber grate (and many double all of that and install 2 grates). Normal build has 3 3/4" close pipe nipples, 2 3/4" caps, a 3/4" ball valve, 6 3/4" conduit nuts (but some people just use magnets to close the holes). Personally I preferred brass nipples and plugs, they cost a bit more but are less maintenance - but then again now I use a guru and that is a completely different story.
The fire basket takes a decent chunk of expanded metal (I think I made 2 from a half sheet - but you can use a bit less if you use a donated charcoal grate), then you will normally want an ash pan. You will also want a pit thermometer. I also have a few valve stems on mine to act as gourmets for temp probes. The top has a bunch of options, depending on your drum. If you use an open top, you can just remove the bung hole and screw in a smoke stack (and something to cover it) - or drill a few holes (arghhhh, all the rain will come into your barrel). Many people prefer a Weber lid. Then there is building equipment - step bits and burner. Kit probably does not include this $40-50 of stuff. Oh, did not mention the basket handle. I like my system of a re-bar chicken's foot. The base is below the ash pan and the leg goes up through the basket. Grab the leg and the whole assembly lifts up, plus the feet give some insulation between the drum bottom and the ash pan - but it requires welding. |
|
07-12-2012, 09:18 AM | #9747 | |
Babbling Farker
Join Date: 04-16-09
Location: Lake Charles La
|
Quote:
|
|
|
07-12-2012, 03:22 PM | #9748 | |
Is lookin for wood to cook with.
Join Date: 08-15-11
Location: south central, ky
|
Quote:
|
|
|
07-12-2012, 05:03 PM | #9749 |
On the road to being a farker
Join Date: 02-16-11
Location: Jacksonville, FL
|
While waiting for parts to come in the mail, I gave my barrel a paint job.
May add a few 'Toxic' or 'Hazardous' stencils on it as well. |
|
07-12-2012, 05:11 PM | #9750 |
Is lookin for wood to cook with.
Join Date: 10-23-10
Location: Granbury,Tx
|
|
|
Tags |
divided circle template, uds, ugly drum, ugly drum grill, ugly drum smoker |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ugly Drum Smoker | ironslob | Q-talk | 2 | 09-19-2010 10:16 AM |
Ugly Drum Smoker - Need Help | Bartkowiakj | Q-talk | 10 | 06-18-2010 09:38 PM |
One Ugly Drum Smoker | Steve_B | Q-talk | 15 | 09-21-2009 10:32 PM |
My (not-so) Ugly Drum Smoker. | hav | Q-talk | 47 | 11-05-2008 02:30 PM |
Ceramic Cooker Meets Ugly Drum Smoker - BUDCS - Concept Drum Discussion | Hook_Line_and_Sinker | Q-talk | 9 | 04-26-2008 02:24 PM |
|
|