|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
10-08-2012, 09:17 AM | #1 |
somebody shut me the fark up.
Join Date: 01-14-06
Location: At home on the range in Wyoming
|
It Ain't Easy Bein' Cheesy - List Your Smoked Cheese Tips Here
With fall in the air, and the holidays right around the corner, now is the time to start thinking about smoking cheese. It's possible cheese could be the easiest thing to smoke - heck, it's ready to eat right of the package and a little smoky flavor can add just the right bump to something we often take for granted ("uhhh, do you want cheese with that?"). So, I thought a thread where we can all chip in some ideas, things to do & not to do, tips, tricks and even some ideas for using your smoked cheese. If you have a favorite smoked cheese story (like opening the smoker only to find all your cheese melted into the drip pan) let's hear it!!
Here are the 4 basic things I think are important.... Start with quality cheese, keep your smoker (or smoke chamber) as cool as you can, take it easy on the smoke, and understand what mellowing is all about. I can break these down a bit further. 1. Tillamook brand cheese is my favorite for smoking, and I buy the 2 pound bricks as the are easy to slice into manageable blocks. 2. I prefer cool days and will move my smoker into the shade, or use an ice tray below the cheese to keep the smoke cool. If my cheese gets too warm, I will move it into the fridge to cool it down then return it to the smoker. To much heat will sweat the milk fat to the surface, so after you turn your cheese, look at and smell your fingers... If they are oily and smell strong, your smoker and your cheese is too warm. If you see a noticeable color change, or if the cheese starts to deform.... your smoker and cheese is too warm. 3. My current favorite smoke generator is a A-Maze-N tray which uses sawdust, however I used a Big Chief electric for 25 years. My secret with the Big Chief was using the small chips in amounts of a couple of tablespoons at a time..... unplugging the smoker every 15 or 20 minutes..... and either rigging a box smoke chamber on top.... or using blocks to keep the the top lid open about 1/2". I have not tried the tin can and soldering iron method. 4. Cheese is dense and needs time to take on smoke. If the smoke is too heavy you will get a bitter layer on the outer surface. You want a light smoke for several hours. 5. Mellowing allows the smoky flavor to even out and become smoother. However, you should be able to sample your cheese throughout the smoking time, and it should be edible without any mellowing. and remember the outer layer will have a stronger flavor. Most importantly, different cheeses have different absorption rates, and the size of the blocks will make a difference. Mellowing can be from 2 days to 2 weeks or longer, so about 12 hours after smoking I will sample it and make a mental note of the flavor. This allows me to guesstimate a reasonable mellowing time. Sometimes after the sample it's not smoky enough... no bid deal, give it another smoke session. Shelf life is in your favor, smoked cheese lasts a long while.... well, sometimes it does. 6. I keep good notes including, outside temps, smoking wood, smoke time, and flavor observations at 1 day, 3 days and 5 days. I also jot down comments from folks I give some to.
__________________
~thirdeye~ Barbecuist ~ Charcuterist ~ KCBS Master Judge & CTC Big Green Eggs, Big Drum Smokers, Big Chiefs, Weber Smokey Joe "Custom Tall Boy" Oil Patch Horizontal, SnS Deluxe Kettle Visit my Cookin' Site by clicking HERE Barbecue is not rocket surgery “The problem with quotes on the Internet is that it's hard to verify their authenticity” ~ Abraham Lincoln
|
|
10-08-2012, 10:07 AM | #2 |
is one Smokin' Farker
Join Date: 01-15-12
Location: Kalama Wa.
|
I found that by allowing cheese to come up to room temp before putting on the smoker it tends to sweat a lot less.
__________________
[URL="http://tombstonebbq.com"]"Tombstone BBQ"[/URL] PNWBA Board Member and Certified Judge. KCBS Custom 72" reverse flow smoker, 18" WSM, Weber Elite, ECB. and misc grills. [URL="https://www.facebook.com/TombstoneBbq?ref=hl"]Tombstone BBQ on Facebook[/URL] |
|
10-08-2012, 12:20 PM | #3 |
Babbling Farker
Join Date: 01-01-11
Location: Southern NJ...exit 36
|
I try not to eat all of it myself....
__________________
Proud owner of 4 VERY ugly drum smokers....and a Greasy Hill reverse flow.... |
|
10-08-2012, 01:50 PM | #4 |
is Blowin Smoke!
Join Date: 05-08-12
Location: Iowa
|
I really want to master this sometime. I saw the fella on here a while back with the soldering iron that looked interesting.
__________________
18.5" WSM ; 22" Kettle ; Weber E-330 ; Weber Q200 (for tailgating), Weber Performer |
|
10-08-2012, 03:34 PM | #5 |
On the road to being a farker
Join Date: 07-09-08
Location: Torrance, CA
|
Any suggestions on wood types to smoke with? I'm assuming strong flavored woods are out (e.g. hickory, mesquite,etc) -- should we stick to fruit woods or something along that route..?
|
|
10-09-2012, 07:08 AM | #6 |
somebody shut me the fark up.
Join Date: 10-27-06
Location: Bothell WA
|
Little Chief Electric Smokehouse with the cool smoke mod.
A lot of people toss the cardboard box they come in, mine is getting pretty ratty after 30 years, but it is insulation after all. I have a grate that is larger than the LC that put on top of the smoker, set the grate rack on top of it and the box fits over it all. A couple pans of Apple/Alder sawdust and we're in cheese Nirvana.
__________________
Brian - Left Hand Smoke BBQ PNWBA 2010 Team of the Year BGE's/WSM's/Pellet Pro WSM/BWS Gater/BDS Clones/Cookshack 008/Weber Performer w EZ-Que/Cajun Bandit/Rib-O-Lator Test Pilot/La Caja China/BBQ Guru/Weber 1000 RK Drum Coffee Roaster Follow Left Hand Smoke on Facebook!http://www.facebook.com/pages/Left-H...462391?sk=wall KCBS CBJ/PNWBA CBJ www.pnwba.com |
|
Thanks from:---> |
10-09-2012, 08:19 AM | #7 |
is one Smokin' Farker
Join Date: 06-10-12
Location: Bloomington, IL
|
Any folks smoking cheese on their WSM that care to share their setups? This is a timely thread as just last week I was talking to some buddies about wanting to try my hand at smoking some cheese.
__________________
WSM 22.5", One-Touch 22.5", Redhead 18.5" Smoke Joe Silver, Q200, "Mr. T" |
|
Thanks from:---> |
10-10-2012, 10:06 AM | #8 |
Quintessential Chatty Farker
Join Date: 06-29-11
Location: Greeneville TN
|
It does not matter what kind of container you use whether it is a WSM or a cardboard box. All it does is 'contain' the smoke. I have never used a store bought smoke generator but they sound good. IMHO the most important thing is temperature. Remember you are (COLD smoking). That means if the outside temp is 60 degrees or less your OK. But, the inside temp should be about the same. That's why some folks use ice. The easiest way to keep the smoke temp down is to not create much heat in the first place. That's where the smoke generators come in. For me the soldering pencil is the easiest way to keep the temp down and the cost is nominal. Trial and error. KISS
|
|
10-10-2012, 10:11 AM | #9 |
is One Chatty Farker
Join Date: 06-28-10
Location: Bothell, WA
|
I've used hickory quite a bit with great results.
__________________
Traeger lil Tex, 2 Weber 22.5", UDS "Go Cougs!" They call me "Dave" [B]Original Noobian Warlord [/B]Loser of Known Space |
|
10-10-2012, 01:40 PM | #10 |
is one Smokin' Farker
Join Date: 04-12-08
Location: Chattanooga TN
|
I filled the water pan with Ice and also another tray of ice in the smoker. then just used the top rack. I think it was just 3 charcoal briquettes and a chunk of fruit wood. I only smoked for a couple of hours and it was a very mellow smoked cheese.
__________________
Weber 22 Smokey Mountain Weber 14 Smokey Mountain Weber Genesis 330 EP |
|
10-10-2012, 01:47 PM | #11 | |
somebody shut me the fark up.
Join Date: 07-08-10
Location: Texas
|
Quote:
I put my cheese on the top grate. I only smoke cheese in the winter, so the cheese stays cool while it smokes. It only takes about an hour to get a good smoke on the cheese. Here is the can and soldering iron setup... CD |
|
|
10-10-2012, 02:17 PM | #12 |
is one Smokin' Farker
Join Date: 10-13-08
Location: boise, id
|
A lot of good suggestions...I use a lil chief for cheese. Only suggestion I would add is a little smoke on cheese is better than too much. I usually use pecan, cherry or maple on cheese.
__________________
22" WSM, 18" WSM, 26" Weber, Weber Performer, MBH's, WGA |
|
Thanks from:---> |
10-10-2012, 04:16 PM | #13 |
is one Smokin' Farker
Join Date: 02-21-09
Location: Knoxville, TN
|
Actually I'm not opposed to using hickory for cheese, just be careful.
I use the soldering iron/can set up in my Egg. Great list of tips so far.
__________________
Chris Knoxville, TN [URL="http://www.nibblemethis.com"]www.nibblemethis.com[/URL] |
|
10-10-2012, 07:19 PM | #14 | |
On the road to being a farker
Join Date: 06-11-12
Location: Waynesville, NC
|
Quote:
|
|
|
10-10-2012, 07:30 PM | #15 | |
is One Chatty Farker
Join Date: 07-01-12
Location: Fredericksburg, VA
|
Quote:
chris
__________________
[B][I][COLOR=black]*A Texan transplant*[/COLOR][/I][/B] [B][SIZE=1][COLOR=black]UDS | [COLOR=blue]Blue[/COLOR] Weber Performer Platinum | Chargriller Akorn | 22.5 Weber OTG | WSJ Gold | Mini WSM | Maverick ET-73 | [COLOR=blue]Blue [/COLOR][COLOR=black]Thermapen | Maverick PT-100 |[/COLOR] Gasser(charcoal chimney starter)[/COLOR][/SIZE][/B] |
|
|
Thread Tools | |
|
|