Lets see some photos of good handles on heavy duty pits.

Flying_Spaghetti_Monster · 12-03-2012, 07:50 PM

Looking to finish my pit soon, and handles are holding me back a little. Lets see some nice custom handles. inside, and out would be helpful.

Mo-Dave · 12-03-2012, 08:03 PM

Don't have any pics but we have a supermarket near here that has a smoker out front. It has handles made out of hatchets with wooden handles and the blades are welded to the doors at an angle. I think it looks cool and like the look of it.
Dave

flyingbassman5 · 12-03-2012, 09:49 PM

Sorry with the no pics

but I saw a guy who took a deer shed and cut the antlers into handles to put on an old Okie Joe. Thought it was pretty cool..

Mo-Dave · 12-04-2012, 11:35 PM

If this works these are the hatchet handles I was talking about.
Dave

C:\Users\DLEE\AppData\Local\Temp\moz_mapi\Image120 42012174041-1.jpg

Mo-Dave · 12-04-2012, 11:39 PM

Quote:

Originally Posted by Mo-Dave

If this works these are the hatchet handles I was talking about.
Dave

C:\Users\DLEE\AppData\Local\Temp\moz_mapi\Image120 42012174041-1.jpg

Sorry but I give up, I just can't get it to work.
Dave

NorthwestBBQ · 12-05-2012, 01:34 AM

I don't have photos, I have Pr0n.

Garrett · 12-05-2012, 05:10 AM

^^+1 on the Pr0n

Dr_KY · 12-05-2012, 07:32 AM

Pr0n X 3 here

Pappy · 12-05-2012, 08:42 AM

Nothing fancy, just strong.

jestridge · 12-05-2012, 09:17 AM

Welding chipping handle ,cut handle off or spring from a trampoline find plenty of them after a big wind storm

DownHomeQue · 12-05-2012, 10:04 AM

Quote:

Originally Posted by Pappy

Nothing fancy, just strong.

Mine are exactly the same just futher apart.. like the door length handles

http://www.bbq-brethren.com/forum/sh...d.php?t=148660

Mo-Dave · 12-05-2012, 11:07 AM

Ok lets see if this works, if so I apologize for the quality of the pic, I was leaving the store and lugging a couple bags of goods. I forgot about the hatchets use as stops on the top.
Dave

http://www.bbq-brethren.com/forum/at...1&d=1354726770

Sometimes reading the instructions really works, go figure.

Mister Bob · 12-05-2012, 11:08 AM

These are stainless steel storefront handles I got from a commercial door hardware supplier.

Flying_Spaghetti_Monster · 12-05-2012, 11:40 AM

What is that painted with? Is your pit insulated or is that high temp paint?

JS-TX · 12-05-2012, 12:32 PM

Super nice pit MB! Love that steel/red combo look.

12-03-2012, 07:50 PM	#1
Flying_Spaghetti_Monster On the road to being a farker Join Date: 10-13-12 Location: Farmington, Utah	Lets see some photos of good handles on heavy duty pits. Looking to finish my pit soon, and handles are holding me back a little. Lets see some nice custom handles. inside, and out would be helpful.

12-03-2012, 08:03 PM	#2
Mo-Dave Quintessential Chatty Farker Join Date: 09-18-06 Location: Hurricane Deck Missouri	Don't have any pics but we have a supermarket near here that has a smoker out front. It has handles made out of hatchets with wooden handles and the blades are welded to the doors at an angle. I think it looks cool and like the look of it. Dave __________________ Let us have a drink and by God lets us not think about the things we ain't never going to know about.

12-03-2012, 09:49 PM	#3
flyingbassman5 is one Smokin' Farker Join Date: 11-26-12 Location: Saint Louis MO	Sorry with the no pics but I saw a guy who took a deer shed and cut the antlers into handles to put on an old Okie Joe. Thought it was pretty cool.. __________________ 18" OTS, 22" OTG, SJ Silver, Cimarron Offset, Coleman Bullet, PBC, UDS, QMaster ATC

12-04-2012, 11:35 PM	#4
Mo-Dave Quintessential Chatty Farker Join Date: 09-18-06 Location: Hurricane Deck Missouri	If this works these are the hatchet handles I was talking about. Dave C:\Users\DLEE\AppData\Local\Temp\moz_mapi\Image120 42012174041-1.jpg __________________ Let us have a drink and by God lets us not think about the things we ain't never going to know about.

12-05-2012, 05:10 AM	#7
Garrett Babbling Farker Join Date: 10-03-12 Location: Gastonia North Carolina	^^+1 on the Pr0n __________________ My arsenal, Stumps Clone, Two Modified offsets, open pit with grate and rotisserie,UDS, Weber One Touch Silver 18.5" kettle, Chargriller Pellet Grill, 36" Blackstone Griddle

12-05-2012, 01:34 AM	#6
NorthwestBBQ somebody shut me the fark up. Join Date: 06-28-09 Location: Everett, WA	I don't have photos, I have Pr0n.

12-05-2012, 07:32 AM	#8
Dr_KY Quintessential Chatty Farker Join Date: 12-15-07 Location: England	Pr0n X 3 here __________________ www.drsweetsmoke.com Slappin that bass like some delerious funky preist!!! UDS, Half Pint (Mini UDS), Weber, ProQ 20, Kegrilla 250 gallon cooker- 'The Meat Beast!!' British BBQ Championships Grand Champion 2008 ~~~~ British BBQ Society - Southern Championship Grand Champions 2009

12-05-2012, 08:42 AM	#9
Pappy is Blowin Smoke! Join Date: 05-09-11 Location: Granite City, Illinois (Near St. Louis "GO CARDS")	Nothing fancy, just strong. __________________ 22.5 WSM, 120 Gallon Offset, Weber Performer, IQ-110, ET-732

12-05-2012, 09:17 AM	#10
jestridge somebody shut me the fark up. Join Date: 12-28-07 Location: annville ky	Welding chipping handle ,cut handle off or spring from a trampoline find plenty of them after a big wind storm

12-05-2012, 11:08 AM	#13
Mister Bob Babbling Farker Join Date: 06-15-09 Location: Scituate, RI	These are stainless steel storefront handles I got from a commercial door hardware supplier. __________________ Mister Bob, Pitmaster - Smokestack Lightning, Bad Ass Barbecue. KCBS CBJ #31759 - IMBAS Certified MOINK Baller

12-05-2012, 11:40 AM	#14
Flying_Spaghetti_Monster On the road to being a farker Join Date: 10-13-12 Location: Farmington, Utah	What is that painted with? Is your pit insulated or is that high temp paint?

12-05-2012, 12:32 PM	#15
JS-TX is Blowin Smoke! Join Date: 02-17-10 Location: San Antonio, TX	Super nice pit MB! Love that steel/red combo look.