Our Homepage | Donation to Forum Overhead | Welocme | Merchandise | Associations | Purchase Subscription | Amazon Affiliate |
|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
07-07-2013, 05:31 PM | #1 |
Full Fledged Farker
Join Date: 12-12-10
Location: Columbus, OH
|
$115 Weber kettle cart
I've been on the lookout for a BBQ cart when I came across a thread on the Primo forum about a $100 stainless cart from Sam's club people were using to hold their Oval XLs. Well the price has increased to $115, but it's still a steal. A few jigsaw blades, a half dozen Dremel cutting wheels, and some L brackets later, viola.
The hole is 22.5" but there is lower structure that prevents the handles from sitting on the tabletop, which was the original plan, but that's ok by me. Now the only direct heat transfer from the kettle to the table is through the support brackets. The mini WSM fitting on the bottom was just icing on the cake. It's a tight fit, but I can lower the bottom shelf another 1.5".
__________________
Mike -- 22.5 OTG -- 18.5" WSM -- Mini WSM |
|
Thanks from: ---> |
07-07-2013, 05:41 PM | #2 |
somebody shut me the fark up.
Join Date: 07-25-12
Location: Los Angeles
Name/Nickname : Sako
|
Great job. Looks awesome.
__________________
LSG 24x30 V/O Yoder YS640 DCS 36 Gasser Blackstone Griddle Retrofit Blackstone Pizza Oven WSJ(K) WGA(P) WJJ(CU) W22(BI) W26(CL) Pit Barrer Junior Kingsford Oval (resto mod) |
|
Thanks from:---> |
07-07-2013, 05:47 PM | #3 |
Babbling Farker
Join Date: 01-01-10
Location: Planet Krypton
Name/Nickname : Jon
|
Great job I like it........KUDOS
__________________
2010 22.5 WSM Weber Q200 1983 WGA 2010 Brick Red Touch n' Go Performer Kitchen stove |
|
07-07-2013, 05:51 PM | #4 |
Full Fledged Farker
Join Date: 11-05-11
Location: Alpharetta, GA
|
Looks awesome! Great idea.
__________________
OK Joe's Longhorn & Vertical Roasting Oven, Brinkmann Cimmaron,'69,'73,'84,'89 Weber Kettle |
|
07-07-2013, 05:52 PM | #5 |
On the road to being a farker
Join Date: 04-17-13
Location: Champlin, MN
|
Maybe it's different around here, but I'm finding Performers on Craigslist for about $115. The cart is awesome though! Despite what I say about the Performers going for the rate they are, I still don't have one...I'm jealous of the counter space!
|
|
07-07-2013, 05:58 PM | #6 |
Full Fledged Farker
Join Date: 08-21-10
Location: Sierra foothills
|
That's a serious upgrade. Well done sir.
|
|
07-07-2013, 06:08 PM | #7 |
Full Fledged Farker
Join Date: 12-12-10
Location: Columbus, OH
|
If I didn't already have the OTG and if they ever showed up on CL here I might have gone that route. This is going to work out really well for me with all the lower shelf space. I really like that I'll have a space for my OTS lid that has been sacrificed to the pizza making gods.
__________________
Mike -- 22.5 OTG -- 18.5" WSM -- Mini WSM |
|
07-07-2013, 06:34 PM | #8 |
is one Smokin' Farker
Join Date: 08-09-10
Location: Olympia, WA
|
Nicely done!
__________________
22 & 2-18 WSM's-3 Weber Kettles-Smokey Joe-Silver C -Weber Q-CookShack Smokette |
|
07-07-2013, 06:43 PM | #9 |
On the road to being a farker
Join Date: 09-03-11
Location: Hainesport, NJ
Name/Nickname : Dominic
|
Nice rig you made there
__________________
Weber Performer :mrgreen:, Weber Genesis Silver C, Weber Smoky Joe, Mini-WSM, Great Outdoors -(Ugly Vertical Cabinet), cheap a%% Kingsford Kettle In the end it will be okay. And if it's not okay, it's not the end. |
|
07-07-2013, 06:44 PM | #10 |
Babbling Farker
Join Date: 11-18-10
Location: USA
Name/Nickname : Rick
|
That's farking sweet there!
__________________
Rick |
|
07-07-2013, 06:50 PM | #11 |
Babbling Farker
Join Date: 04-25-11
Location: Valdese, NC
Name/Nickname : John
|
I think I might go have a look at one of those to use as a prep table and replace my plastic top folding table. The table top is the only part that is stainless steel. I wonder if I'd have issues with rust on the rest of it?
__________________
http://facebook.com/mancavemeals |
|
07-07-2013, 06:53 PM | #12 |
Full Fledged Farker
Join Date: 12-12-10
Location: Columbus, OH
|
IIRC someone on the Primo site said no rust issues after three years. I'm debating if I want to put a cover on or not.
__________________
Mike -- 22.5 OTG -- 18.5" WSM -- Mini WSM |
|
07-07-2013, 07:08 PM | #13 |
is one Smokin' Farker
Join Date: 02-05-13
Location: North Wales Pa
|
That's flipping awesome!
__________________
PBC---Weber Kettle |
|
07-07-2013, 08:18 PM | #14 |
Got Wood.
Join Date: 06-20-13
Location: Michigan
|
Nice job! I like the pizza lid idea!
|
|
07-07-2013, 09:23 PM | #15 |
Knows what a fatty is.
Join Date: 01-20-13
Location: China Twp. Mi.
|
Nice craftsmanship. It looks great.
|
|
Thread Tools | |
|
|