|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
09-17-2013, 05:35 PM | #1 |
On the road to being a farker
Join Date: 07-23-13
Location: Roy, Utah
|
UDS Stencil How to...
I looked for a how to before I did the paint on my UDS but I couldnt find a tutorial on how to layer some colors on to get a 3 color logo. I dye a lot of Disc Golf Discs so I just used the same basics but applied spray paint instead of dye. Got some shots and figured I would put together a how to. the lines didnt come out super crisp but I plan to go over them with a brush to crisp it all up.
First thing I did was hit my UDS with about 4 layers of Rustoleum grill paint out of a rattle can. Wanted to make sure it was sealed up nice and it would hold up for a while. All the other layers I put on were just regular spray paint. I cut some ContacPaper out into a sheet that was about the size I wanted for my logo. Stuck the entire sheet on my UDS and tried to get it as flat as I could and press all the bubbles out. My drum has a lot of ribs so it was a pain but it worked. Then on the contacpaper I drew the outline of my stencil then used an exacto to cut that section out. Peeled off the sheet in the middle and sprayed my white base coat... I let it dry for about an hour then laid another sheet of contacpaper over the layer of white. I drew on the contacpaper all the pieces that I wanted to be grey then used an exacto to cut those out and peeled the unwanted sections of contacpaper off. Then I hit it with the grey spray paint. Let that layer dry overnight then stuck another layer of contacpaper over my painted area, drew out all the sections I wanted green then used an exacto to cut those out and peel off the cutout sections. Sealed all the edges up as well as I could and sprayed it with green Let the paint dry a bit and peeled that layer off... and an action shot If I do another I will let each layer of paint dry a bit more before I peel off the stencils. The other thing I will do in the future is use a drum with fewer ribs so I can get the contacpaper to lay flatter and have fewer bubbles on the edges. The paint Job cost me about $15 and it was fun to do so I dont really mind that its not perfect Its big and you can tell what it is, thats really all I was after!!!
__________________
Originally Posted by cathy L........I just grab my fatties and yank them out. |
2 members found this post helpful. |
Thanks from:---> |
09-17-2013, 05:45 PM | #2 |
somebody shut me the fark up.
Join Date: 07-15-09
Location: Memphis, TN...Formerly of Decatur, AL
|
Did you burnish before applying the paint?
__________________
Guerry [FONT=Book Antiqua]Pit Beeatch for Team Munchkin[/FONT] [FONT=Book Antiqua][B]Avatar by Northwest BBQ [/B][/FONT]"...In nature, there are predators. I believe the common denominator of the universe is not harmony, but chaos, hostility and murder..." Werner Herzog |
|
09-17-2013, 06:06 PM | #3 |
On the road to being a farker
Join Date: 07-23-13
Location: Roy, Utah
|
Just wiped it down with a damp cloth to get all the dust and stuff off. I built my UDS about mid summer and I have used it a lot so there was some grease and sauce spots on it.
__________________
Originally Posted by cathy L........I just grab my fatties and yank them out. |
|
09-17-2013, 06:59 PM | #4 |
Babbling Farker
Join Date: 06-29-12
Location: Litchfield County, CT
Name/Nickname : Pete
|
Looks good!
__________________
hopelessly, helplessly, happily addicted to a shipload of Webers |
|
09-17-2013, 07:49 PM | #5 |
Full Fledged Farker
Join Date: 08-04-13
Location: Dayton, Ohio
Name/Nickname : ROB
|
Great job. Thanks for sharing.
__________________
Rob WSM 18.5", Weber Kettle, Thermapen, Maverick ET-732 |
|
09-17-2013, 08:30 PM | #6 |
is one Smokin' Farker
Join Date: 12-24-12
Location: Up a tree somewhere in MD
|
That turned out awesome!
__________________
[I]Perhaps this is the moment for which you have been created[/I] ~ Esther 4:14 |
|
09-17-2013, 08:45 PM | #7 |
is One Chatty Farker
Join Date: 08-20-13
Location: Odessa, TX
|
Why on earth would you put that God-awful Eagle on there???!!!?!?
A nice blue silver and blue star should do well! Looks great!
__________________
Husband, Father & Pastor. Offset Cooker made by Muscrat, Weber Kettle, El Cheapo Brinkman |
|
09-18-2013, 05:41 AM | #8 |
Full Fledged Farker
Join Date: 10-11-09
Location: Germany. I'm not German. Just live here.
|
Nice job. Can you see through the contact paper?
__________________
KCBS member, CBJ, IMBAS Certified MOINK Baller. WGA, WBS, 3x - UDS & WSM on Wheels, 2x - Performers, Weber Genesis. |
|
09-18-2013, 05:52 AM | #9 |
On the road to being a farker
Join Date: 08-27-13
Location: Cincy, OH
|
I looks good! I am just curious how well the " normal" paint will hold up.
|
|
09-18-2013, 06:02 AM | #10 |
On the road to being a farker
Join Date: 08-22-09
Location: Sebring Fl
|
Sweet paint job ! One of my dogs is named after Riley Cooper..... go figure
|
|
Tags |
eagles, stencil, UDS paint, UDS Stencil |
Thread Tools | |
|
|