|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
03-22-2013, 03:05 PM | #1 |
Is lookin for wood to cook with.
Join Date: 03-22-13
Location: Lakin,Ks
|
Rescuing cast iron skillets
Hi all! I have a few cast iron skillets that belonged to my Grandme. These have not been used for many years. Do I just wash them and use them or do I have to "reseason them" some way? I wanted to try making a cobbler of some kind on the pellet grill. Thanks!
|
|
03-22-2013, 03:05 PM | #2 |
is one Smokin' Farker
Join Date: 03-19-12
Location: Louisville,Ky
|
Are they rusted at all?
|
|
03-22-2013, 03:34 PM | #3 |
Babbling Farker
Join Date: 02-24-13
Location: Port Charlotte, Florida
|
I never wash mine. Take coarse salt and rub them down to remove any bits of rust or remnants and rinse under cold water NO soap. Wipe with some lard or crisco and heat those babies up. Wipe down again with paper towles, and get to cookin!
__________________
Proud recipient of the coveted "Aussie Lamb Farker Tick of Approval" Award |
|
03-22-2013, 03:34 PM | #4 |
Is lookin for wood to cook with.
Join Date: 03-22-13
Location: Lakin,Ks
|
I don't think so. If they do it's light rust.
|
|
03-22-2013, 04:01 PM | #5 |
Babbling Farker
Join Date: 02-24-13
Location: Port Charlotte, Florida
|
They are dying for you to cook in them. The more cooking they do the merrier they are!
__________________
Proud recipient of the coveted "Aussie Lamb Farker Tick of Approval" Award |
|
Thanks from:---> |
03-22-2013, 04:21 PM | #6 |
is one Smokin' Farker
Join Date: 03-19-12
Location: Louisville,Ky
|
Then like they said, I would knock any rust off with steel wool...wash in hot water with no soap....then I'd coat it with oil and heat it up to 450 or 500, then let cool.....
|
|
03-22-2013, 04:22 PM | #7 |
is one Smokin' Farker
Join Date: 03-19-12
Location: Louisville,Ky
|
don't forget about the cornbread....nothing makes cornbread better than a cast iron skillet....I have one dedicated to just that..nothing else gets cooked in it...
|
|
03-22-2013, 04:28 PM | #8 | |
Quintessential Chatty Farker
Join Date: 11-13-11
Location: york, pa
|
Quote:
__________________
*When all else fails, just ask yourself ?Quid faceret Gore et Landarc?? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Just a little pyro at heart! Who's got the hot dogs? Bubba Keg, Weber Genesis E-310 NG Mini WSM, Shhh!!! Michael's surprise Cornflower Blue Thermapen Might not be the fastest, but it sure is the prettiest! ~~~~~~~~~~~~~~~~~~ Proud recipient of a certifiably uncertified limited edition MOINK ball certificate!! |
|
|
Thanks from: ---> |
03-22-2013, 04:55 PM | #9 | |
is one Smokin' Farker
Join Date: 05-22-10
Location: Smoky Mountains, NC
|
Quote:
If you have a gas grill, that's the ideal thing to re-season them on. If they haven't been used in a long time, it's probably a good idea.
__________________
...Half a yard full of crap to cook on like everybody else... Slow-to-average-speed [COLOR=dimgray]GRAY[/COLOR] Wal-Mart thermometer Just a hungry hillbilly lookin for a dead critter to cook Four [URL="http://www.bbq-brethren.com/forum/group.php?groupid=39"]Zeros[/URL] in one [URL="http://www.bbq-brethren.com/forum/forumdisplay.php?f=86"][COLOR=red]throwdown[/COLOR][/URL][COLOR=red],[/COLOR] baby! :bow: |
|
|
03-22-2013, 05:22 PM | #10 |
is Blowin Smoke!
Join Date: 02-02-13
Location: Springfield, IL
|
I just read an article about the science of seasoning cast iron based on another thread here.
The article suggests flaxseed oil at high temperatures 500* for one hour, then allowing the pan to cool for two hours as the oven cools down. Then repeat multiple times. http://sherylcanter.com/wordpress/20...ing-cast-iron/ |
|
Thanks from:---> |
03-22-2013, 06:28 PM | #11 |
somebody shut me the fark up.
Join Date: 04-29-12
Location: Tulsa
|
What Hometruckin said! They are begging to be used, once you figure out a cast iron skillet you'll never use that nasty non stick stuff again
__________________
Jeremy Old Oklahoma Joe (Opal) GMG TREK (Greta Thunberg) Weber Summit Charcoal (Waylon) MAK 2 Star (Maybel) 2x “Unfortunately nothing wrong with that” Bob C Que… I must be living right (somehow…) |
|
03-22-2013, 06:37 PM | #12 | |
somebody shut me the fark up.
Join Date: 07-08-10
Location: Texas
|
Quote:
If you have any rust at all, you need to get rid of it. If it is minimal, smokeisgood's method could do the trick. You may even be able to do a hot water and ScotchBright cleaning, and cook up half a pound bacon. For heavier rust, you'll need a more aggressive cleaning, and a proper re-seasoning. Pr0n would help us evaluate your situation. CD Last edited by caseydog; 03-22-2013 at 06:55 PM.. |
|
|
03-22-2013, 06:38 PM | #13 |
Babbling Farker
Join Date: 02-17-11
Location: Chicago north 'burbs IL
|
I had my wife's grandmothers cast. They had caked on layers of carbon and it was flaking off.
I got a 5 gallon bucket filled 4/5's with water and put in a can of Lye I got from Ace Hardware. I put in the skillets one at a time. It ate off all the crap. Wearing gloves and eye protection through all my encounters with the Lye water. The Lye will eat up most of the carbon and get you back to the metal. Then you can reseason and use like they were new. You can use the Lye solution several times. Just make sure you add the Lye to water and not water to Lye. You can pm me if you want. I have a stubborn skillet in lye water for over a month now....
__________________
Shirley Fabrication 24x60 staightback cabinet + warmer Battle Box Midi UDS Weber Performer 22.5 Weber OTG WGA Charcoal Weber Genesis |
|
03-22-2013, 06:45 PM | #14 |
is one Smokin' Farker
Join Date: 02-13-13
Location: Wyoming County, N.Y.
|
I've done a few, steel wool them, sand blast them, sandpaper them, whichever you prefer, wash them in hot water, soap if you like, then rinse them in hot water, dry them throughly, rub them down with crisco, put them on your preheated gasser, about 300-350, for about 3-4 hours or longer, and presto, you will never cook with another store bought "coated" pan again. cast iron is the bomb. We have about a dozen- pans, griddles, dutch ovens, that we regularly use, and we love them. trust me, do them on your gasser and not in your house oven.
__________________
UDS, Mini-UDS, Weber OTS, smokey joe, gasser, 3 pie irons, and a weenie fork. [URL="http://www.bbq-brethren.com/forum/group.php?groupid=34"][COLOR="Blue"]Secret Squirrel Society[/COLOR][/URL] - Nope, doesn't exist. Bob Semper Fi |
|
Thanks from:---> |
03-22-2013, 06:51 PM | #15 |
is one Smokin' Farker
Join Date: 12-31-12
Location: chesterfield, va
|
I have rescued some in the past that were pretty rusty i sandblasted those and reseasoned using flaxseed oil if theres only a small amount of rust i have used vinagar and salt mix which works pretty good or u could do what others have mentioned sounds like they would all work pretty well. As for reseasoning theres a lot of things that work but i highly recommend flaxseed oil it gives a very hard durable nonstick coating
__________________
BLUE WEBER 22.5 OTG,(OBUDS) OVERBUILT U.D.S, MAVERICK ET732, 38"x38"x7' SMOKE HOUSE. |
|
Thanks from:---> |
|
|