Our Homepage | Donation to Forum Overhead | Welocme | Merchandise | Associations | Purchase Subscription | Amazon Affiliate |
|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
10-14-2013, 10:42 AM | #16 |
Full Fledged Farker
Join Date: 10-11-13
Location: Mississippi
|
BTW...the hinges we're using are thick, weldable 5 inch hinges. Should hold up for long time.
|
|
10-21-2013, 09:19 AM | #17 |
Full Fledged Farker
Join Date: 10-11-13
Location: Mississippi
|
Well, I HAD some metal coming in Friday, but the guy that was bringing it had a few unforeseen issues occur....SO, I didn't get the metal yet, which meant that this weekend, I didn't make any progress on the smoker. I'm hoping he can get the metal ready by this coming weekend, or else I can wrangle up some more. No gigs for the band this weekend, so I REALLY need to get something going on the smoker.
__________________
"I'm not completely worthless...I can always serve as a bad example!" |
|
10-21-2013, 11:41 AM | #18 |
is One Chatty Farker
Join Date: 10-11-12
Location: Jonesboro. AR
Name/Nickname : DHQ
|
Looks good!
__________________
[URL]http://www.bbq-brethren.com/forum/showthread.php?t=243527[/URL] 150 Gallon Build (2017) [URL]http://www.bbq-brethren.com/forum/showthread.php?t=148660[/URL] 250 Gallon Offset Build (2012) [URL]http://www.bbq-brethren.com/forum/showthread.php?t=211078[/URL] 600 Gallon Offset Build (2016) |
|
10-21-2013, 11:58 AM | #19 |
Full Fledged Farker
Join Date: 10-11-13
Location: Mississippi
|
__________________
"I'm not completely worthless...I can always serve as a bad example!" |
|
10-21-2013, 12:18 PM | #20 |
Babbling Farker
Join Date: 07-11-11
Location: Tuscaloosa Alabama
|
Great start brother!!!! Hope your wife has a speedy recovery and she will be in our prayers!!!!!
__________________
TuscaloosaQ Check out our website at ShirleyFabrication.com Like our Facebook Page Facebook.com/ShirleyFabrication |
|
Thanks from:---> |
10-26-2013, 10:26 PM | #21 |
Full Fledged Farker
Join Date: 10-11-13
Location: Mississippi
|
Ok...got a LITTLE work done on the smoker today....will post pics when I get a chance. My son got into helping with the build after his football game. GREAT Time to spend quality time with the kids...building a smoker.
SO, got the door cut out. Has anyone had an issue where after cutting the door and welding the hinges....the bottom of the door curls in somewhat. The top of the door fits together perfect, but the bottom of the door has curled in a little...towards the inside of the tank. Not overly bad, and it's only the last few inches, but was definitely odd.
__________________
"I'm not completely worthless...I can always serve as a bad example!" |
|
10-28-2013, 09:00 AM | #22 |
Full Fledged Farker
Join Date: 10-11-13
Location: Mississippi
|
__________________
"I'm not completely worthless...I can always serve as a bad example!" Last edited by Branded BBQ; 01-20-2016 at 08:47 AM.. |
|
10-28-2013, 09:03 AM | #23 |
Full Fledged Farker
Join Date: 10-11-13
Location: Mississippi
|
Attachment 86865
Attachment 86866 Door cut, hinges reinforced..... Son passed out on me after a couple hours. Lol.
__________________
"I'm not completely worthless...I can always serve as a bad example!" Last edited by Branded BBQ; 01-20-2016 at 08:47 AM.. |
|
11-21-2013, 09:40 AM | #24 |
Full Fledged Farker
Join Date: 10-11-13
Location: Mississippi
|
Don't know for sure how much I will get done on the smoker this coming weekend, as the band has a gig AND we're doing a competition on our FB page for free tickets to an upcoming show opening for a big artist, but I hope to try to get something done. DO have one question.... pretty much everything is 1/4", the tank, the FB will be...etc.. Can the RF baffle plate be slightly thinner without causing too much grief in the future. I got a sheet of metal...I believe 5/16 but not certain. Anyhow...the sheet is perfectly flat, and almost the perfect size to fit perfectly with only little trimming. If it won't make me regret it in the future, I'd like to use it. Any help is appreciated.
__________________
"I'm not completely worthless...I can always serve as a bad example!" |
|
11-21-2013, 10:01 AM | #25 |
is One Chatty Farker
Join Date: 05-17-09
Location: Summerville, SC
|
Looking great! Hope your wife is doing great!
I love a build thread!
__________________
[LEFT][COLOR=black][FONT=Verdana] Yoder YS640 PitBoss Copper top series 7 [I][FONT="Arial Black"][B][I]A Pair of Pellet Poopers[/I][/B][/FONT][/I][/FONT][/COLOR] [/LEFT] [FONT=Verdana][COLOR=black][COLOR=magenta]Purple Thermapen:laugh:[/COLOR][/COLOR][/FONT] MASTER Judge, SCBA Carolina Pit Master [URL]http://patio-q.com/[/URL] |
|
11-21-2013, 10:09 AM | #26 | |
Full Fledged Farker
Join Date: 10-11-13
Location: Mississippi
|
Quote:
Thx Sammy....She's doing great now.
__________________
"I'm not completely worthless...I can always serve as a bad example!" |
|
|
Thread Tools | |
|
|