|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
04-12-2013, 08:09 PM | #1 |
Knows what a fatty is.
Join Date: 04-10-13
Location: indianapolis, in
|
thanks for the inspiration
Decided i wanted to make a uds so i went and got my drum. went all will nilly and cut the lid off then decided i wanted a flat lid and didnt want to do all the burning and whire wheeling needed to clean an oil drum so i picked up a food grade drum with lid and band for 25 bucks .. it had pinaple in it... so in the morning i am going to start making mine.. i will take pics but i am giong to skip the mundain stuf like burning it out cleaning and so on.. there are 1000's of pics of that on here....
think i am gonna go with the military theme for mine to pay tribute to all my family members that have served out counrty.... will update later this weekend but now off to watch yukon men.. |
|
04-12-2013, 08:16 PM | #2 |
somebody shut me the fark up.
Join Date: 07-30-11
Location: Pemberton, New Jersey
|
Keep us posted...
|
|
04-12-2013, 08:25 PM | #3 |
Quintessential Chatty Farker
Join Date: 10-06-10
Location: Austin, TX
Name/Nickname : Roger
|
so you had a nice drum with bare metal and you opted to get a food grade drum with an epoxy liner to save time and trouble?
__________________
22.5" WSM nicknamed Fuel Hog! Rescued 22.5" OTS. 18.5" OTS. SJS Mini-WSM. Building UDS ver 2.0. HEB briqs (rebranded Royal Oak). Pecan/Hickory/Cherry/Apple/Peach woods. 2016 Fuji Absolute 2.0 LE (for burning off all the great BBQ) |
|
04-12-2013, 11:35 PM | #4 |
Babbling Farker
Join Date: 02-24-13
Location: Port Charlotte, Florida
|
Yup...
__________________
Proud recipient of the coveted "Aussie Lamb Farker Tick of Approval" Award |
|
04-12-2013, 11:36 PM | #5 |
Knows what a fatty is.
Join Date: 04-10-13
Location: indianapolis, in
|
My first drum had motor oil in it.. How do i make sure its good to go..i can use either one i need a burn barel and one for my smoker i have made stuff out of wood but not alot with metal so i am learning here. Any thing im missing feel free to give advice on
|
|
04-12-2013, 11:40 PM | #6 |
Babbling Farker
Join Date: 11-18-10
Location: Callahan Fl
Name/Nickname : Rick
|
Go figure!
__________________
Rick |
|
04-12-2013, 11:49 PM | #7 |
Knows what a fatty is.
Join Date: 04-10-13
Location: indianapolis, in
|
Ok i get it use first drum take lid off new drum...thanks for the slightly sarcastic way of showing me the error of my thinking :)
|
|
04-12-2013, 11:57 PM | #8 |
Babbling Farker
Join Date: 02-24-13
Location: Port Charlotte, Florida
|
Here is the thread indexed
http://www.bbq-brethren.com/forum/sh...4&postcount=35
__________________
Proud recipient of the coveted "Aussie Lamb Farker Tick of Approval" Award |
|
04-12-2013, 11:58 PM | #9 |
Babbling Farker
Join Date: 11-18-10
Location: Callahan Fl
Name/Nickname : Rick
|
Do you have a lid to fit the first drum, a Weber 22.5" kettle lid perhaps? If so I'd just clean it out real good and proceed from there. Much easier then removing an epoxy liner.
__________________
Rick |
|
04-13-2013, 12:07 AM | #10 |
Knows what a fatty is.
Join Date: 04-10-13
Location: indianapolis, in
|
i have a dome lid but is from some other no name gril i was gonna use it but that is my grillin grill.. so i dont want to beat it up plus i like the look of the flat lids i want to put some chrome stacks on it.. beeing a trucker an all chrome stack are in the blood.. im thinking black, diamond plate, and stacks
|
|
04-13-2013, 12:17 AM | #11 | |
Babbling Farker
Join Date: 11-18-10
Location: Callahan Fl
Name/Nickname : Rick
|
Quote:
__________________
Rick |
|
|
04-13-2013, 12:21 AM | #12 |
Knows what a fatty is.
Join Date: 04-10-13
Location: indianapolis, in
|
im gonna use the first drum i started out with i have done 2 burns in it already and ill do another good one after i get all the holes punched and what not... i am gonna take the lid from my food grade drum and put it on my other one.... i read somewhere on here e-z off would get the epoxy out if you spray it on and leave it in the sun for it to get hot
|
|
04-13-2013, 12:27 AM | #13 |
Babbling Farker
Join Date: 11-18-10
Location: Callahan Fl
Name/Nickname : Rick
|
Sounds like you've got it all worked out, good luck with the build and keep us posted.
__________________
Rick |
|
04-13-2013, 05:06 PM | #14 |
Knows what a fatty is.
Join Date: 04-10-13
Location: indianapolis, in
|
In the middle of my build got all the hardware on and going to test fit lid.food grade lid acts like its bigger than my oil drum..mabey just cause of the coating...not sure.. Doing my last burn now before i clean it up and paint it trying to burn the crap off the food grade lid as well
|
|
04-13-2013, 06:18 PM | #15 |
Knows what a fatty is.
Join Date: 04-10-13
Location: indianapolis, in
|
I should be painting in the am some time still have a fire going in it now.trying to burn the apoxy off the lid..that stuff is crazy fire proof....will post pics soon
|
|
|
|