|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
09-04-2009, 03:14 AM | #4051 |
Knows what a fatty is.
Join Date: 05-25-09
Location: Des Moines Iowa
|
Last edited by hondad; 09-04-2009 at 03:17 AM.. Reason: wrong photo |
|
09-04-2009, 05:05 AM | #4053 | |
Found some matches.
Join Date: 08-18-09
Location: Bellaire, OH
|
Quote:
Another option (I'm doing this as well with a 3rd drum) is to cut the donor drum off below the high point of the middle top ridge. Use it as a super weber type lid. Please keep in mind that I have no idea if this will work or not. This is my first UDS build and won't know if it works until next week when I season it. Here's a couple pics. 3/4" lip Lid #1 Lid #2 |
|
|
09-04-2009, 09:59 AM | #4054 |
Full Fledged Farker
Join Date: 04-25-09
Location: Des Moines, IA
|
As I remember Hondad, that opener was the first part you had acquired for your UDS...
Looks good. Chris |
|
09-04-2009, 12:45 PM | #4055 |
Got Wood.
Join Date: 08-28-09
Location: jc, nj
|
my first UDS (almost finished) and my sous chef...
http://i544.photobucket.com/albums/h...voteck/035.jpg |
|
09-04-2009, 12:48 PM | #4056 | |
somebody shut me the fark up.
Join Date: 04-24-09
Location: Utrecht,TheNetherPharkinglands
|
Quote:
Nice looking drum!
__________________
-TG -WGA (3) -UDS (S,M,L) All fueled by [COLOR=lime]Ecobrasa[/COLOR] Coco Briquettes *[URL="http://lowlandsmokers.blogspot.com/2011/06/lowland-smokers-workshop-hei-en-boeicop.html"]Lowland Smokers[/URL] Dutch BBQ Champion 2011 - 2012* *[URL="http://lowlandsmokers.blogspot.com/2011/06/lowland-smokers-workshop-hei-en-boeicop.html"]Lowland Smokers[/URL] Dutch BBQ Champion 2013 Low 'n Slow *WGA Ambassador |
|
|
09-04-2009, 01:02 PM | #4057 | |
somebody shut me the fark up.
Join Date: 07-11-06
Location: Norco, Ca.
|
Quote:
If that weber hanger goes under the lid and prevents it from sealing you are going to have temp control issues. |
|
|
09-04-2009, 01:05 PM | #4058 |
Got Wood.
Join Date: 08-28-09
Location: jc, nj
|
thanks for the heads up, i put it on for the first time before the pic and i didnt get a tight seal. i have a couple screw in hooks that i will put on there.
|
|
09-04-2009, 05:42 PM | #4059 |
Knows what a fatty is.
Join Date: 09-04-07
Location: Billerica, ma
|
She is Done!
__________________
Paul......Humphreys Pint+, 22" WSM, UDS, Weber Performer, Weber Summit 650 NG |
|
09-04-2009, 06:20 PM | #4060 |
Babbling Farker
Join Date: 06-20-09
Location: Grand Rapids, MI
|
You can send me that lid hanger I don't mind a little extra air flow. BTW....Nice drum!
__________________
Outlaw BBQ Smoker - TheBBQSuperstore.com |
|
09-04-2009, 06:21 PM | #4061 |
Babbling Farker
Join Date: 06-20-09
Location: Grand Rapids, MI
|
__________________
Outlaw BBQ Smoker - TheBBQSuperstore.com |
|
09-04-2009, 06:21 PM | #4062 |
Got rid of the matchlight.
Join Date: 08-05-09
Location: Clinton Twp. Michigan
|
Looks real NICE!!
Now, hows she cook...... more pics |
|
09-04-2009, 07:35 PM | #4063 |
Full Fledged Farker
Join Date: 07-11-09
Location: Saugus MA
|
Thanks to all
Thanks to all, got to around page 140 or so, and had to start my build. Used a grape juice drum, had the typical tough coating to sand out after a burn. Tough job in the city. Seasoning went well, had to throw some sausages on while I waited. Used 3 -3/4 nipples for inlets w/ 1 ball valve & 8 -1/2" holes in lid. With valve open and 1 cap off stayed steady @ 230. Will try my hand at ribs this w/e. Thanks again to all for the advice.
|
|
09-05-2009, 02:09 AM | #4065 |
is one Smokin' Farker
Join Date: 07-07-09
Location: Paradise, CA
Name/Nickname : Chris
|
Sweet, did you just screw individual casters to the bottom of the drum?
No problem with the heat and the rubber/plastic wheels? I've been planning on buying a drum dolly, but maybe I'll just go that route.. |
|
Tags |
divided circle template, uds, ugly drum, ugly drum grill, ugly drum smoker |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ugly Drum Smoker | ironslob | Q-talk | 2 | 09-19-2010 10:16 AM |
Ugly Drum Smoker - Need Help | Bartkowiakj | Q-talk | 10 | 06-18-2010 09:38 PM |
One Ugly Drum Smoker | Steve_B | Q-talk | 15 | 09-21-2009 10:32 PM |
My (not-so) Ugly Drum Smoker. | hav | Q-talk | 47 | 11-05-2008 02:30 PM |
Ceramic Cooker Meets Ugly Drum Smoker - BUDCS - Concept Drum Discussion | Hook_Line_and_Sinker | Q-talk | 9 | 04-26-2008 02:24 PM |
|
|