Knives and such. - Page 4

landarc · 02-05-2013, 10:12 PM

hmmm, I think they are beautiful knives.

retired trucker · 02-06-2013, 12:56 AM

Hey Mo-Dave, check out this video of a "Red Neck W E. I had the same idea, but would mount one socket holder on each side that could slide in and out to adjust for different edge angles, similar to the WE. Should be able to build one for less than $40 + the lansky. Thought of building it on a poly cutting board.

This is video #1 of 2. The second shows him using it. Should be referenced from the first video.

Blessings,

Omar

Mo-Dave · 02-06-2013, 06:28 AM

Omar, that is a lot better set up than what I did. I like the swivel set up, they are asking I think 145.00 for a new swivel set up at WE. I did not put much thought into mine and only used what I had on hand at the time so it is not nearly as clean looking as this one, also I have both sides of the clamp screwed down and I think his idea of letting one side stay loose is a better idea. I have another clamp, so someday I may build another one, I would mount it to something a little heavier than what he has it on. I stand at a bench so I wanted mine closer to eye level than what he has, accounting for the height on mine, all I can say is it does work. He worries a lot about cutting himself, I think he should buy some metal mesh fish cleaning gloves.
Dave

Mo-Dave · 02-06-2013, 06:44 AM

Quote:

Originally Posted by landarc

hmmm, I think they are beautiful knives.

I am shallow, just so shallow.

I met her a short few hours ago, fondling her long enough to slice some strawberries for desert, she is not a timid one, I like that about her, and feel their is a good chance we will develop a loving relationship, looks be damned.

I may find our relationship hard to explain to my wife

Dave

02-05-2013, 10:12 PM	#46
landarc somebody shut me the fark up. Join Date: 06-26-09 Location: sAn leAnDRo, CA	hmmm, I think they are beautiful knives. __________________ [COLOR=DarkGreen][COLOR=DarkRed][SIZE=1]me: I don't drink anymore Yelonutz: me either, but, then again, I don't drink any less [/SIZE][/COLOR][/COLOR][SIZE=1][COLOR=DarkRed] [COLOR=Pink]SSS[/COLOR] [/COLOR][/SIZE]

02-06-2013, 12:56 AM	#47
retired trucker is One Chatty Farker Join Date: 09-28-11 Location: Dallas, Georgia	Hey Mo-Dave, check out this video of a "Red Neck W E. I had the same idea, but would mount one socket holder on each side that could slide in and out to adjust for different edge angles, similar to the WE. Should be able to build one for less than $40 + the lansky. Thought of building it on a poly cutting board. http://www.youtube.com/watch?v=3I5bI...e_gdata_player This is video #1 of 2. The second shows him using it. Should be referenced from the first video. Blessings, Omar __________________ Webber 22 1/2 OTG Gold, UDS, rusted out chimney, Red Lavatools Thermowand, Maverick ET 732, 1950 model wife. Walking cane to help me get around.

02-06-2013, 06:28 AM	#48
Mo-Dave Quintessential Chatty Farker Join Date: 09-18-06 Location: Hurricane Deck Missouri	Omar, that is a lot better set up than what I did. I like the swivel set up, they are asking I think 145.00 for a new swivel set up at WE. I did not put much thought into mine and only used what I had on hand at the time so it is not nearly as clean looking as this one, also I have both sides of the clamp screwed down and I think his idea of letting one side stay loose is a better idea. I have another clamp, so someday I may build another one, I would mount it to something a little heavier than what he has it on. I stand at a bench so I wanted mine closer to eye level than what he has, accounting for the height on mine, all I can say is it does work. He worries a lot about cutting himself, I think he should buy some metal mesh fish cleaning gloves. Dave __________________ Let us have a drink and by God lets us not think about the things we ain't never going to know about.