|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
01-07-2013, 02:04 PM | #16 |
Babbling Farker
Join Date: 07-03-12
Location: Virginia Beach, VA
|
Do they have an online site by chance? If they do can you link us?
__________________
~Ren~ Fat Kids Club Founding Member |
|
01-07-2013, 02:18 PM | #17 |
Full Fledged Farker
Join Date: 01-05-12
Location: Sonora, CA
|
I use shipping drums that contained nuts, bolts, washers, etc. The drums are unlined as the nuts, bolts, etc. are packed in a heavy duty plastic liner. I should mention I get them for $18, no dents and a lid ring. My supplier gets them from the ports if that is any help to you.
__________________
Mike 2 x UDS Weber Kettle 22.5 w/rotisserie Wine Barrel Smoker Traeger 075 Mystery Metal Egg |
|
01-07-2013, 03:02 PM | #18 |
Take a breath!
Join Date: 06-12-12
Location: Los Angeles
|
No idea what costs elsewhere are, but in Los Angeles, Apex sells refurbished "smoker drums" (they actually call them that) that have no paint job and no lining and have been sand-blasted for $35 a piece. The lady I spoke to just now says that their refurbished drums are certified for liquids without leakage so they shouldn't let in any air that you want.
__________________
22" OTG; 22" Performer; mini-WSM; Brinkmann gasser; UDS (on the way); Maverick ET-732 |
|
Thanks from:---> |
01-07-2013, 03:33 PM | #19 |
is One Chatty Farker
Join Date: 04-12-10
Location: Houston, Texas
|
Next UDS I build will be with a new drum.
|
|
01-07-2013, 07:37 PM | #20 |
Full Fledged Farker
Join Date: 05-17-11
Location: Baltimore, Maryland
|
__________________
Weber Performer, 18.5" WSM, UDS. |
|
01-07-2013, 07:38 PM | #21 |
Full Fledged Farker
Join Date: 05-17-11
Location: Baltimore, Maryland
|
I'm on UDS overload. I've read so much my head is spinning.
I'm just gonna ask b/c I think I missed this part. Does a new unlined drum still need a major burnout? Or can I just rub some oil and season it? John
__________________
Weber Performer, 18.5" WSM, UDS. |
|
01-07-2013, 08:34 PM | #22 |
Full Fledged Farker
Join Date: 07-30-12
Location: Quitman, Ms
|
Burn it out good. It's not gonna have high temp paint on it. So you wanna get barrel hot enough to remove paint. After that rattle can it with high temp paint.
__________________
UDS, mini wsm, 22.5" weber kettle |
|
01-07-2013, 09:27 PM | #23 |
Take a breath!
Join Date: 06-12-12
Location: Los Angeles
|
Pretty sure if it is a new unlined drum, even if unpainted, it will have been treated with rust inhibitor and still requires a burn-out.
__________________
22" OTG; 22" Performer; mini-WSM; Brinkmann gasser; UDS (on the way); Maverick ET-732 |
|
Tags |
drum, uds, what kind |
|
|