Mini WSM Project
- Thread starter tenpenny_05
- Start date
Suweet!
LloydQ
is One Chatty Farker
Dare I say that it is cute?
tenpenny_05
Full Fledged Farker
I'll allow it
Nice!
pjtexas1
somebody shut me the fark up.
Cool bat handle for the intake.
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
- Joined
- Jan 14, 2006
- Messages
- 12,734
- Reaction score
- 15,623
- Points
- 113
- Location
- At home on the range in Wyoming
I've had one for years, and the parts for a second one. They are cool units. Nice work on the logo and the bat is way cool.
benniesdad
Full Fledged Farker
That is definitely cool. I made two of them in the past and they are not just a fun project but you end up with a darn good little cooker as well. Since the 14 inch WSM came out you don’t see many folks making them anymore. Good job.
mbshop
Babbling Farker
How are you protecting the lower vent from plugging with ash ?
Stablergetz
Knows what a fatty is.
Nice
ebijack
Babbling Farker
Nice!
Add some photos etc to the big thread
https://www.bbq-brethren.com/forum/showthread.php?t=138702
Just make sure to check the little box so you are able to add to the thread since it has not been updated lately.
Add some photos etc to the big thread
https://www.bbq-brethren.com/forum/showthread.php?t=138702
Just make sure to check the little box so you are able to add to the thread since it has not been updated lately.
Last edited:
Shagbark
Knows what a fatty is.
Interesting, I'm not familiar with this modification/improvement.
Is that large aluminum stock pot in the middle with some sort of hole arrangement cut in the bottom?
Please enlighten those of us that are less informed. :wink:
Is that large aluminum stock pot in the middle with some sort of hole arrangement cut in the bottom?
Please enlighten those of us that are less informed. :wink:
ebijack
Babbling Farker
Tamale pot. If you read thru some of this. You should get your answers.
https://www.bbq-brethren.com/forum/showthread.php?t=140479
https://www.bbq-brethren.com/forum/showthread.php?t=140479
Shagbark
Knows what a fatty is.
Thank you.
mbshop
Babbling Farker
Yea, there are several options as you will see. I basically came up with the orginal idea on another site. I use a 2x4 in can. Drill holes on the sides near the bottom and invert over the vent holes. You don't need big holes nor do you need a lot of them as you will be almost closing the vent anyway.
tenpenny_05
Full Fledged Farker
I used a $0.97 stainless pet food bowl from walmart and used a dremel to cut some triangles out towards the top.
tenpenny_05
Full Fledged Farker
Thanks! I got a little over eager removing my stencil before the paint dried 100%, so its messed up in a few places. I'm really happy with how the bat handle turned out, even if it does look a little phallic from the side.
