|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
05-11-2010, 09:31 AM | #5911 |
is one Smokin' Farker
Join Date: 01-22-08
Location: waterloo ontario
|
Prototype Intake
Just tried out a new version of intake for the UDS. I had made a similiar intake to the BGE and it was working well. I mentioned it on another site and they said it wasn't "proven" and would be "way to hard to control with that big a hole" . I don't know about the proven and maybe I should see if BGE has a proven stamp but decided I didn't need to be proven since it had been working good with almost 200lbs of lump gone through it. The control thing wasn't a question in my mind but since I had a 28mm die in the press I thought I would punch three smaller holes and see if it made a difference.
The only difference is - its harder to empty the ash out the holes. Control is no different, a little slower getting up to pizza temp but really no difference. I always get questions on these so here are some answers- Yes this is better than nipples and taps because its easier to control, you can reach in and give your basket a shake if you ever get an ash buildup and with the BGE style you can empty your ashes so you don't need an ash pan either, you don't trip over this, you don't need to weld or keep tightening this. And No the fire doesn't burn down the side closest to the intake. Here's some pictures for anyone who wants to try it. Last edited by h20loo; 05-11-2010 at 09:56 AM.. |
|
05-11-2010, 11:30 AM | #5912 |
Knows what a fatty is.
Join Date: 02-11-10
Location: Goose Creek, SC
|
I found that in using a closed drum and cutting it open the 22.5 lids fit snugly with a minimum of modification...maybe I got lucky!!
|
|
05-11-2010, 03:48 PM | #5913 |
Found some matches.
Join Date: 04-26-10
Location: Fishers, IN
|
|
|
05-11-2010, 05:36 PM | #5914 |
is one Smokin' Farker
Join Date: 04-04-10
Location: Shelby Twp. Macomb Co. SE Michigan
|
|
|
Thanks from:---> |
05-11-2010, 08:33 PM | #5915 |
is one Smokin' Farker
Join Date: 01-22-08
Location: waterloo ontario
|
Doc- I use threaded automotive tire valve stems. Remove the core and the turkey therm. slides right thru. They bolt right on thru an appropriate hole. Others have found stuff in the plumbing isle and then you can always make your own as woodbutcher suggested.
|
|
Thanks from:---> |
05-11-2010, 10:34 PM | #5916 | |
somebody shut me the fark up.
Join Date: 01-26-10
Location: Virginia
|
Quote:
What you need is a Watts A-192 Hose Barb Adapter with 1/4 barb x 1/4 mip. Home Depot or Lowes has them. Here is a link - http://www.lowes.com/pd_27631-104-A-...ductId=3133599 . And get a nut and washer to fit it and you are good to go.
__________________
Operation BBQ Relief Founding Member - I am Obsessive Compulsive about BBQ. Google it. |
|
|
Thanks from:---> |
05-12-2010, 09:42 AM | #5917 |
Got Wood.
Join Date: 07-21-09
Location: houston
|
Where do you all purchase the bottle opener to add to the drum?
__________________
**The darkest hour is just before dawn** |
|
05-12-2010, 02:01 PM | #5918 |
is one Smokin' Farker
Join Date: 01-22-08
Location: waterloo ontario
|
I got my first one at Goodes on Katy hwy and have since been buying them off ebay. just bought a Bulldog opener for my sons barrel
|
|
05-12-2010, 03:11 PM | #5919 |
On the road to being a farker
Join Date: 07-17-09
Location: Saint Paul, MN
|
Just scored another drum for UDS part deux.
From consolidated container in minneapolis 55 gallon reconditioned open head drum with lid 2" bung. When I got there I asked him if he could grab one of the ones that hadn't been painted yet. So I got one straight out of the reconditioning process before painted for $26.50. Nice. drill some holes and season and I will be set. |
|
Thanks from:---> |
05-12-2010, 04:09 PM | #5920 | |
Knows what a fatty is.
Join Date: 05-11-10
Location: Rochester, MN
|
wish I would have seen this earlier.....been having trouble finding a good used drum down in Rochester, MN. I did call Midway in St. Paul.....and they had a 3 drum minimum purchase....why, I have no idea......I gave up at that point on a new one. Darn. I did get a used drum from St. Cloud....$28 delivered.....but have now spent another few hours and $5.00 washing it out and sanding it, and burning it, etc.
Maybe I can sell that one and get a nice clean one before I start drilling, etc. Quote:
|
|
|
05-12-2010, 04:25 PM | #5921 |
Knows what a fatty is.
Join Date: 05-11-10
Location: Rochester, MN
|
The other thing I can't seem to locate is an old weber kettle grill. I looked around at new grills in Lowe's, Menards, etc. Most of the off-brand kettle's are not big enough. The Weber lid is 23-1/4" in diameter, which is just right for a closed-top drum with the lid cut out.
I looked at a couple knock-off grills and they are only 22-7/16th", which won't fit. Do I really want to buy a new Weber grill just to scavenge the lid and grates. This could become a pretty expensive UDS, if that is the case. |
|
05-12-2010, 04:38 PM | #5922 | |
is One Chatty Farker
Join Date: 03-16-10
Location: Northwestern Wisconsin
|
Quote:
Here's a craigslist one for $20.00 http://minneapolis.craigslist.org/ra...737289593.html heres another for $30.00 http://minneapolis.craigslist.org/ra...736544364.html You get the idea
__________________
Some call me... Tom...? 12" Charbroil, SJS, WGA:becky:, 22.5 OTG:thumb:, mUDS:drama:, 2 UDS:cool: w/AML Wood Art Custom Handles, 2 pull behind rigs The Beast :twisted:, & the new White Shadow :hail: :twisted: Inventor of[B]:[/B][COLOR=black] [URL="http://www.bbq-brethren.com/forum/showpost.php?p=1273411&postcount=1"][B]3BGB![/B][/URL][B] , [/B][URL="http://www.bbq-brethren.com/forum/showpost.php?p=1284334&postcount=1"][B]Shigen![/B][/URL][B] , & [/B][URL="http://www.bbq-brethren.com/forum/showpost.php?p=1387858&postcount=1"][B]Bacone Scotch Egg Sundae![/B][/URL][/COLOR] :hail:Avatar by Zydecopaws:hail: [B][URL="http://BigButzBBQSauce.net"]Big Butz BBQ Products [/URL][/B] |
|
|
05-12-2010, 04:41 PM | #5923 |
Wandering around with a bag of matchlight, looking for a match.
Join Date: 04-26-10
Location: Riga, Latvia
|
Fitting Weber top to UDS - making the rolled lip smaller?
Hi Everyone,
I have read, searched and though I have seen many ideas on how to fit a smaller Weber top on to a larger rolled edge drum, I haven't seen that anyone has tried this idea so I wanted to get some feedback. I would rather not cut off the rolled edge of the barrel, as it makes a nice top. So, instead of removing it, my idea is to slightly shrink it. The circumference of the barrel is about 2.7 cm (about 1 inch) larger than the Weber lid. My angle grinder cutoff blade is about 1mm thick. So, if I cut about 30 grooves in the roll, evenly spaced around the top, then, using my band clamp, wrap around the roll and squeeze it in such that the grooves are pinched together, I should make the top just narrow enough the lid fits. What do you think? Might it work? Thanks, Dennis |
|
05-12-2010, 04:48 PM | #5924 |
Babbling Farker
Join Date: 04-03-10
Location: Cypress TX
|
These guys are in Spring TX and keep several choices in stock.
http://www.cunninghamliving.com/cool...openers_1.aspx
__________________
J Crunch |
|
05-12-2010, 04:49 PM | #5925 |
On the road to being a farker
Join Date: 07-17-09
Location: Saint Paul, MN
|
Sprry smokingdave.
This is the second time I've bought a drum from them. When I called to place my order the lady said that they don't usually pull one from the reconditioning process, but I knew if I asked the guy when I went to pick one up he would go grab one that was waiting to be painted. It's pretty cool looking in that it's been heated above 1800 degrees and it's been ball bearing blasted. I just need to wipe it down because there is some dust in it and then it will be good to go. this build should take less than an hour! Sweeet. |
|
Tags |
divided circle template, uds, ugly drum, ugly drum grill, ugly drum smoker |
|
|