|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
03-31-2012, 05:13 PM | #166 |
Full Fledged Farker
Join Date: 12-20-11
Location: SE, Minnesota
|
Waiting to see what the printer comes back with for a price. Figure you want a regular one and not a baby doll version? ;)
__________________
Triple T BBQ - CBJ 2012-2014 [url]http://www.bbq-brethren.com/forum/showthread.php?t=123061[/url] |
|
03-31-2012, 05:18 PM | #167 |
Babbling Farker
Join Date: 05-10-11
Location: East of Atlanta, GA.
Name/Nickname : Colin
|
XXL baby doll with exposed midriff?
Ewwww!
__________________
Colin - "Drinking alcohol can cause memory loss... or worse, memory loss" New Braunfels Hondo Offset New Braunfels Bandera (Refurbished & Improved) Char-Broil 450 (Purchased new in 1981) 1996 Blue Weber SS Performer Weber charcoal Go-Anywhere 2 Weber SJSs & modified stock pot Mini-WSM Weber rotisserie, Rib-O-Lator & Smokenator system Blackstone Tailgater Combo & STOK Island gasser |
|
03-31-2012, 05:47 PM | #168 |
is One Chatty Farker
Join Date: 08-28-11
Location: Waconia, MN
|
I want the one that you showed me today, that will be on black!
__________________
Ryan The Beast: 500 Gallon Homemade Reverse Flow [url]http://www.bbq-brethren.com/forum/showthread.php?t=187401[/url] Weber 22" Cajun Fryer FF2 |
|
03-31-2012, 06:10 PM | #169 | |
Knows what a fatty is.
Join Date: 03-14-12
Location: Morgan Hill, CA
|
Quote:
Are there any Lang / Meadow Creek owners out there who could confirm the location of the vent / chimney stack on the inside of the cooking chamber on their smokers and perhaps post a pic? The chimney / vent on a Lang appears to come from the highest point of the cooking chamber. I am currently thinking of buying one and one of the criticisms I have read is that they burn a lot of wood / charcoal and I was wondering if perhaps this approach will have any effect on this. Perhaps this is what you wish to test...
__________________
Lang 84 Deluxe, Weber 22 1/2" Kettle, Vermont Castings Gas Grill. |
|
|
03-31-2012, 06:46 PM | #170 | |
Full Fledged Farker
Join Date: 12-20-11
Location: SE, Minnesota
|
Quote:
So if my theory and other tests scale up I am good. If not I can shorten the length and still keep it adjustable from the top all the way down to the grill deck. Test runs start either tomorrow or next week. Waiting on the call from my painter right now.
__________________
Triple T BBQ - CBJ 2012-2014 [url]http://www.bbq-brethren.com/forum/showthread.php?t=123061[/url] Last edited by Triple T BBQ; 03-31-2012 at 07:37 PM.. |
|
|
Thanks from:---> |
03-31-2012, 06:56 PM | #171 |
is one Smokin' Farker
Join Date: 02-07-12
Location: Springfield, MO
|
I hope you take it as a compliment when I copy your backlit stencil cut on those fenders for my next project (in the distant future) !
Every time I look at your build, I look at mine and think, "man I gotta do this, do that, do the other thing..." We're kinda settling in some areas to conserve cash and your build is makin' me feel bad about it! My build is only solid until someone walks by yours and then all of the sudden I look amateur! Yep..I've decided..I think you're gonna need to stop updating us.. It's detrimental to my build! On a more serious note: definitely post the results to the efficiency of that lower damper inside the chamber. I'm curious as to how that will work out. I really like the concept. For the 1,000th time..you got a really pro build here. I can't wait to that bad boy(girl) in action! Can't you just take a week of vacation to finish it up so the rest of us don't have to wait?!
__________________
* XL [COLOR=seagreen]BGE[/COLOR] *Charbroil offset (cheapo) and a *[URL="http://www.bbq-brethren.com/forum/showthread.php?t=125966"]project in the making 6' long x 28" diameter offset[/URL] [COLOR=red]<<<[/COLOR]Take a look! |
|
03-31-2012, 07:16 PM | #172 | |
Full Fledged Farker
Join Date: 12-20-11
Location: SE, Minnesota
|
Quote:
I wouldn't worry about what yours vs. mine vs. anyone elses looks like. If you like it, then thats all that matters. If you see us cooking some place, be sure to stop by, pull up a chair and have a cold one with us. One of the great things the misses and I love about the car show hobby is how many great friends we have made over the years just by having something sitting out and folks stop by to talk and visit. Same goes for this hobby. We have met a ton of wonderful people along the way and don't intend to stop now. Life is way too short. If I can help in any way with your build, let me know. All the best.
__________________
Triple T BBQ - CBJ 2012-2014 [url]http://www.bbq-brethren.com/forum/showthread.php?t=123061[/url] |
|
|
03-31-2012, 07:24 PM | #173 |
is one Smokin' Farker
Join Date: 02-07-12
Location: Springfield, MO
|
I know I know. but when you're building at the same time others are, you always compare ! (at least I do)
I am legitimately amped by your build, though. Very inspirational! I can't remember if you said, but did you plasma cut the lettering or use a jigsaw? or neither? If you're ever in MO..lemme know!
__________________
* XL [COLOR=seagreen]BGE[/COLOR] *Charbroil offset (cheapo) and a *[URL="http://www.bbq-brethren.com/forum/showthread.php?t=125966"]project in the making 6' long x 28" diameter offset[/URL] [COLOR=red]<<<[/COLOR]Take a look! |
|
Thanks from:---> |
03-31-2012, 07:44 PM | #174 | |
Full Fledged Farker
Join Date: 12-20-11
Location: SE, Minnesota
|
Quote:
Here is the link to the YouTube Video of the plasma table in action again. http://youtu.be/hCTDW_lspvM
__________________
Triple T BBQ - CBJ 2012-2014 [url]http://www.bbq-brethren.com/forum/showthread.php?t=123061[/url] |
|
|
Thanks from:---> |
04-11-2012, 02:57 PM | #175 |
Full Fledged Farker
Join Date: 12-20-11
Location: SE, Minnesota
|
Picking up the smoker from the paint shop tonight. Can hardly wait to see how it comes out.
__________________
Triple T BBQ - CBJ 2012-2014 [url]http://www.bbq-brethren.com/forum/showthread.php?t=123061[/url] |
|
04-11-2012, 03:23 PM | #176 |
Full Fledged Farker
Join Date: 11-22-11
Location: Waconia, MN
|
Looking forward to more pics!
__________________
http://www.bbq-brethren.com/forum/showthread.php?t=123907 - My Backwoods Pro Clone |
|
04-11-2012, 03:48 PM | #177 |
On the road to being a farker
Join Date: 01-18-12
Location: Mechanicsville, Va
|
Did you figure out why the smoker looked semi- flat rather than gloss?
__________________
Damage BBQ 250gal offset reverse flow homemade smoker on 5x8 trailer named #2. |
|
04-11-2012, 04:33 PM | #178 | |
Full Fledged Farker
Join Date: 12-20-11
Location: SE, Minnesota
|
Quote:
I am doubtful we will need this high of a temp the next time and I will be using the temp gun we have to check the external temps of the firebox and cooking box locations. Hindsight is always perfect don't you know. If our firebox turns out to be too small then we will just fire the plasma cutter back up and lop it off there this fall and build a larger one like others on here have. Then just sandblast the whole thing again (cooker only) and repaint with the lower temp paint. Look for the data on the external temps to appear shortly. Dragging it home tonight and then will be tossing couple logs and charcoal into it tonight for a test run. I can't wait till the weekend. I still need to put our Menards special egg cooker together too.
__________________
Triple T BBQ - CBJ 2012-2014 [url]http://www.bbq-brethren.com/forum/showthread.php?t=123061[/url] |
|
|
04-11-2012, 07:00 PM | #179 |
Knows what a fatty is.
Join Date: 03-14-12
Location: Morgan Hill, CA
|
I am very sorry to hear about the paint but I think that is such a sweet smoker it does not need gloss paint to look good!
Is there a chance of some new pics? I would very much like to it in daylight. From what I can see it is going to be an awesome smoker. I cannot wait to see some pics of it in action!
__________________
Lang 84 Deluxe, Weber 22 1/2" Kettle, Vermont Castings Gas Grill. Last edited by SmokinJon; 04-11-2012 at 09:41 PM.. |
|
04-11-2012, 08:06 PM | #180 |
is one Smokin' Farker
Join Date: 02-07-12
Location: Springfield, MO
|
^^^^ What he said
__________________
* XL [COLOR=seagreen]BGE[/COLOR] *Charbroil offset (cheapo) and a *[URL="http://www.bbq-brethren.com/forum/showthread.php?t=125966"]project in the making 6' long x 28" diameter offset[/URL] [COLOR=red]<<<[/COLOR]Take a look! |
|
Tags |
jambo clone, offset smoker, reverse flow horizontal, trailer |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
42" RF Smoker Build | morgaj1 | Q-talk | 88 | 02-13-2012 09:01 AM |
Smoker Build "THE TOWER" | BarbequeKansasCity | Q-talk | 48 | 01-28-2012 03:41 AM |
Old Country 20" "Pecos.." offset at Academy? | Dave Russell | Q-talk | 11 | 10-07-2011 08:48 AM |
Introducing "Ole #7" (New Smoker Build) | AsstChief7 | Q-talk | 24 | 06-05-2008 10:00 PM |
I have offset smoker "101" questions? | jdub | Q-talk | 14 | 11-19-2007 05:42 PM |
Thread Tools | |
|
|