|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
02-23-2013, 10:05 AM | #1 |
is one Smokin' Farker
Join Date: 03-29-10
Location: Buffalo, NY
|
275 Gal Oil Tank Build (pron)
I was finally able to get a hold of a 275 gallon fuel oil tank for my next build: $90 delivered to my house from a guy who lives 45 minutes away... sounded like a great deal to me!
For the past week or so I have been thinking/planning how I'm going to build this- at first I was thinking about laying it flat side down, but decided it would just be too big. Then I thought about how to make doors that would reduce heat loss when I open them. I thought about sliding closet type doors that go in front/behind each other, but that would restrict my ability to have pull out cooking grates. In the end I decided to go with a pretty traditional approach: Sorry about the pic size, I couldn't shrink them without losing quality. I plan to have: - A 2' drain with shut off in the bottom for cleaning- I used a smaller one in my UDS, but it clogs way too easy. -Full length work table on the front, which may or may not drop down. -Full length handle (not pictured) on the end with the swivel casters. -Large sand/water pan which I may end up fabbing a vented lid for to slow the water loss to steam/evap -A 55 gallon drum with slide out coal basket for the fire box. I'm thinking about keeping the head of the drum removable for easy cleaning -At least 3 cooking levels that can pull out for easy access. Build out of angle iron and expanded steel -Vertically opening doors, which if i do the hinges right, won't need counter weights That's all i got for right now. I'll update if the design changes. This is going to be a long project for me- first time welding and building anything of this size. It will definitely be a fun project! Thanks for reading!
__________________
2 UDS: Sean "Puffy" Coals & Tupork, 275g oil tank smoker: Piggy Smokes, in progress |
|
02-23-2013, 10:21 AM | #3 |
Full Fledged Farker
Join Date: 02-18-13
Location: Terre Haute, Indiana
|
I was told the 55 gallon drum would be to thin for Fire Box??? Might want to check into it. I think it looks awesome though!!
|
|
02-23-2013, 10:13 PM | #4 |
is one Smokin' Farker
Join Date: 03-29-10
Location: Buffalo, NY
|
Yeah, I heard the same thing. Looking into lining it with fire bricks or something.
__________________
2 UDS: Sean "Puffy" Coals & Tupork, 275g oil tank smoker: Piggy Smokes, in progress |
|
02-23-2013, 10:23 PM | #5 |
Quintessential Chatty Farker
Join Date: 12-17-10
Location: Pleasanton, Ca
|
OMG I would love to find one of those!! Nice design.
__________________
XL BGE, Kamado Joe Jr, Santa Maria pit, 26" Weber custom performer, MAK One Star pellet cooker, 14.5" WSM, Jumbo Joe, WGA, Arte Flame griddle insert for the 26" Weber. Custom wooden handles for BBQ's made by Marty Leach (oh, that's me) [url]http://www.amlwoodart.com[/url] |
|
03-15-2013, 08:40 AM | #6 |
is one Smokin' Farker
Join Date: 03-29-10
Location: Buffalo, NY
|
I'm having some doubts about the actual volume of the tank- I've seen them described as 275 gallon, 250 gallon, 200 gallon... I need to know the actual volume for the calculator I'm using.
The tank measures 44" high, 27" deep and 60" long. Can anyone say with 100% certainty that this IS a 275 gallon tank? If I'm wrong it will seriously skew my calculations. I looked all over the tank- found a tag with manufaturer's info, but no size listed on it. Thanks in advance!
__________________
2 UDS: Sean "Puffy" Coals & Tupork, 275g oil tank smoker: Piggy Smokes, in progress |
|
03-15-2013, 08:44 AM | #7 |
Full Fledged Farker
Join Date: 02-18-13
Location: Terre Haute, Indiana
|
__________________
Doc- Offset RF Stick burner Trailer |
|
Thanks from:---> |
03-15-2013, 10:19 AM | #8 |
Quintessential Chatty Farker
Join Date: 08-01-12
Location: Fairfield, Florida
Name/Nickname : Dave
|
Neat design, I look forward to seeing it come together. Just a thought: if you think you might want to do a whole hog, 2 doors can be a problem. I built my rig with a single 50" door on a 72 inch tank; no counter weights (yet) and it's not to heavy. I've done +50# whole hogs and think i can fit up to 80# in mine. Just something to consider.
__________________
I'm Dave Got a bunch of cooking toys and a custom metal fabrication shop where I spend my time building all sorts of smokers & outdoor cooking gear. |
|
03-16-2013, 09:39 AM | #10 |
On the road to being a farker
Join Date: 03-15-13
Location: iowa
|
Hi guys im new here but have been reading the forums for awhile now. We built one of these last summer except laid it flat and went with one big rack and a big rotisserie in it. The barrel will work as a firebox but I found on ours anyway in bad weather rain, high winds an d temps dropping it wasnt insulated enough to hold temp without fighting it the whole time. Personally im planning to cut the barrel off and go with a heavier box thats hopefully less maintenance on long overnight cooks in bad weather.
|
|
03-16-2013, 07:04 PM | #11 | |
is one Smokin' Farker
Join Date: 03-29-10
Location: Buffalo, NY
|
Quote:
At first I considered laying it flat too. I figured I could mount the drum I'm using for the firebox directly underneath, but I'm actually gaining quite a bit of cooking space by going vertical with 3 levels as opposed to one (3744 sq inches versus 2494 sq inches). Also, I thought the doors would be easier to cut/mount. I'm also considering digging up an 85 gallon drum to house the inner 55 gallon and stuffing the gap with insulation. Haven't quite figured out how it's going to work, just an idea. Also, depends on the price.
__________________
2 UDS: Sean "Puffy" Coals & Tupork, 275g oil tank smoker: Piggy Smokes, in progress |
|
|
03-16-2013, 07:10 PM | #12 | |
is one Smokin' Farker
Join Date: 03-29-10
Location: Buffalo, NY
|
Quote:
__________________
2 UDS: Sean "Puffy" Coals & Tupork, 275g oil tank smoker: Piggy Smokes, in progress |
|
|
06-23-2013, 01:18 PM | #13 |
is one Smokin' Farker
Join Date: 03-29-10
Location: Buffalo, NY
|
It. Has. Begun. ....Finally!
__________________
2 UDS: Sean "Puffy" Coals & Tupork, 275g oil tank smoker: Piggy Smokes, in progress |
|
Thanks from: ---> |
06-23-2013, 01:20 PM | #14 |
somebody shut me the fark up.
Join Date: 08-06-10
Location: Stuart, Fl
Name/Nickname : Mike
|
Coolness! Lookin forward to the build.
__________________
Homey, the Homegrown frier, 22" WSM, 18.5" Elderly(but not retired) WSM,Homegrown Electric, Weber gasserrrr,Weber Performer, Gravity feed smoker, Blackstone, Indisputably Fastest [COLOR=purple]Purple[/COLOR] Thermapen, SAI Satay Grill Avatar by landarc, thanky! |
|
06-23-2013, 01:31 PM | #15 |
Full Fledged Farker
Join Date: 03-30-13
Location: Lake City, FL
|
Looking forward to seeing this build. Seems as though you started with the proper planning needed to pull it off, keep up the good work.
__________________
48" Brinkman off-set, Model A1 RF trailer, Bradley Smoker Luck= preparation + hard work |
1 members found this post helpful. |
Tags |
build, oil tank, smoker |
|
|