Ugly Drum Smoker

Efficiency and thermal mass are two different things.
How hot do you want to get?
How fast do you want to get there?
How long do you want to be there?
 
SuperJETT said:
Are you talking about using the cement dry or mixing with water?
Click to expand...

Sorry, I forgot to mention water. Yes, you add water, and I believe some hydrated lime. It's been quite some time since I made this mixture so I don't remember the exact ratios.
Well, I guess what you're looking for is thermal mass more so than insulating properties. Like lining the walls with firebricks. That would definitely hold and keep temps stable once the thermal mass reaches ideal temp.
 
CambuiAl,

You definitely need to get the ball valve tight and sealed. If it's not too loose, you can use some hi-temperature silicone. It's usually red in color and you can get it at all automotive supply stores. A tube is about $5 here in the United States.
 
If you do a bit of research, you will probably find some mix recipes for the vermiculite (and possibly perlite). IIRC vermiculite is a cheep substitute used in low temp backyard forges. You might also search for lightweight cement recipes. Perlite is an expanded volcanic glass (vermiculite is an expanded silica), so not 100% which was used in which application.
 
Ok...metal working noob question here...

I have two UDS that I built a coulple years ago. Currently, I use fridge magnets on the four intakes (3/4"). The magnets work great but it is time to step-up and add the nipples/ball valve. I'd also like to add the pipe up the side so I don't have to bend over everytime to adjust airflow.

My question is this...what parts do I need? What are they called?

I did search here, there and everywhere but didn't really find what I am looking for. Would like to be able to walk into Lowe's and say, "I need this..."

Thanks,
 
black iron pipe close nipples and lock nuts for them. I didn't use the lock nuts though, I cut my holes just right so the nipples threaded themselves into the drum creating an airtight seal.
 
Well here is the mini-UDS I made for the place I work. Nothing flashy, just a KISS build.
DSC03900_zps1593b93d.jpg

It is a small drum, not sure of the exact size. I made this one upside down so it would be easier to clean and tend to the basket.
DSC03903_zpsa4694e4f.jpg

DSC03901_zps940e8e7e.jpg

DSC03902_zps130de3f6.jpg

This is the WSJ I saved at a yard sale(free).
DSC03897_zpsf77a7cf6.jpg

DSC03898_zpsf4f0cee3.jpg

DSC03899_zpsd36eb95c.jpg


I fired it up for a seasoning, and I'm not sure if it's the size or what. But this has been the easiest UDS I have made to control the temp. I got it up to 250, ran dead nuts for about 3 hours, bumped it up to 300 for another 2 hours, then up to 400 for a final 3 hours. Each time I had no problem hitting the temp or holding the temp. I shut it down and out of the half of bag of KBB I put in it. there is about 1/2 of that KBB left. I almost don't want to donate it to work. It's awesome.
 
I'm on page 352 and this thread is never ending. I think I got the concept, well at least by page 50 if a person doesn't get it somethings wrong :p . This will be a great smoker to cook small quantities of meat and efficient enough to walk away. I'm getting two 125 gallon D tank's "propane" to make one hell of an offset smoker. I out grew my little charbroil offset. I don't think I can sit through and read the remaining 377 pages without climbing out of my skin screaming. Nice forum and lots of info for those like me who enjoy working with metal and cooking good grub!
 
Check this thing out... Igotgas came in to work today and surprised me with this early Birthday gift. He used a mule deer shed that he found up in Northern California for the handle. I know you folks have built some incredible UDS's and not to take anything away from anyone, but since this one is mine, haha I am gonna have to say it is the nicest UDS that I have ever seen.

rk3cb8.jpg
 
Hello everyone.

This is my first post. I'm so glad I found this forum. Such great information and inspiration. I'm about to start making my first UDS and have a question regarding sandblasting. I haven't read the whole thread yet (I cheated, by starting at page 600 or so), so hopefully my question hasn't been answered.

I see others mentioning that they've gotten theirs blasted for as little as $25. Where in the world are you finding these people? The cheapest quote I've gotten is $80. For that price, I can just about get a brand new drum. I've placed an add in Craigs List with no results. I've asked friends and no one knows anyone. Any suggestions?

If there is anyone in the Portland area reading this, and you know of someone that can do it for a decent price, please, please, let me know.

Thank you!
 
I finally finished assembled my third uds, stole the basket out of number 2 due to no materials on hand. I ran a breakfast fatty through her memorial weekend and let it burn through the night. Still holding 230 in the morning. Gotta love these cans...........
 

Attachments

  • image.jpg
    image.jpg
    115.8 KB · Views: 645
AngryBird: I got into my Yellow Pages and looked up Sandblasting and Powdercoating. Both businesses do sandblasting, and can do the job. I just called all of the shops in my area and took the cheapest deal offered. The sandblasting shop I used quoted me $25 over the phone, blasted my drum while I waited in the parking lot, but charged me only $20 because it only took him about 10 minutes to do.

Most shops wanted to quote me their hourly rate and try to figure it out from there. I got estimates running anywhere from $40 - $75. The shop I used was a small father and son operation (with mom answering phones,) and they treated me right. I'll remember them when I need something else done.

Good luck!
 
This is my 17th or 18th UDS not sure I've lost track. My daughter in the service has another serviceman that was so so interested in one and because he was deployed I couldn't say no when he asked her if I could make one for him. Total cost.....our freedom!! So hope he enjoys it and welcome home!
 
I confess to having only read 50-60 of these pages but why drill three holes at the bottom when only one seems to be used/valved?
 
jimstocks53 said:
I confess to having only read 50-60 of these pages but why drill three holes at the bottom when only one seems to be used/valved?
Click to expand...
Cause there are times when you might want to get the temp up to 400/450 degrees to crisp the skin on chicken!
 
Thanks RustyPup,

I haven't picked up a Yellow Pages in years thanks to the internet. Guess I'll have to find one somewhere! :)

The guy's I've spoken with have given me hourly rates and told me it would take an hour and a half! Thanks for giving me something to shoot for (especially knowing how long it should take) when cold calling.



RustyPup said:
AngryBird: I got into my Yellow Pages and looked up Sandblasting and Powdercoating. Both businesses do sandblasting, and can do the job. I just called all of the shops in my area and took the cheapest deal offered. The sandblasting shop I used quoted me $25 over the phone, blasted my drum while I waited in the parking lot, but charged me only $20 because it only took him about 10 minutes to do.

Most shops wanted to quote me their hourly rate and try to figure it out from there. I got estimates running anywhere from $40 - $75. The shop I used was a small father and son operation (with mom answering phones,) and they treated me right. I'll remember them when I need something else done.

Good luck!
Click to expand...
 
You must log in or register to reply here.

Similar threads

B
How to fire WSM/UDS/Drum smoker [PDF]
Replies
5
Views
405
Nuco59
N
T
Pitts & Spitts adjustable charcoal grill. Reviews?
Replies
7
Views
1K
Nuco59
N
BruceB
Outlaw patio smoker giveaway
Replies
5
Views
2K
BruceB
BruceB
J
Billows on a Drum Smoker
Replies
4
Views
466
JoeGuitar
J
cayenne
FIRST COOK on the new Offset Smoker!!! Pictures and comments...
2
Replies
22
Views
870
Bury Me In Smoke
B
Back
Top