|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
04-04-2014, 02:59 PM | #1 |
Knows what a fatty is.
Join Date: 07-05-13
Location: Ireland
|
1st UDS underway in Ireland
So got hour today to stat uds
1 - all parts got, in box ready to go 2 - made up my sliding vent gor bottom and drilled corrosponding holes in barrel 3 - loaded up my new barrel and burned out for hour 4 - looks like paint fair tough as not all burned off at bottom 5 - gas torch and still bo joy with paint 6 - load up 2nd fire and still smouldering away 2hr later Have pics but not uploaded yet Hope get few hours tomorrow Will build my basket, Drill all holes Then try grind and burn last bit paint off If paint was off i think 3 hours all need Cheers |
|
Thanks from:---> |
04-04-2014, 03:04 PM | #2 |
Babbling Farker
Join Date: 10-17-13
Location: Blythewood, SC
Name/Nickname : Dennis
|
Sound good man!
__________________
BUBBA GRILLS 250r, CharGriller Akorn, 1.5 uds, 28in Blackstone, Blackstone Tailgater, Weber Mastertouch Slate Blue, Weber Copper Performer Premium, Weber 26er, Weber Jumbo Joe, and a set of Octoforks! GOOD FOOD GOOD TIMES AND GOOD FRIENDS CAN BE FOUND HERE!! THE BBQ BRETHREN BASHES! [URL]http://www.bbq-brethren.com/forum/forumdisplay.php?f=8[/URL] |
|
Thanks from:---> |
04-04-2014, 03:18 PM | #3 |
Knows what a fatty is.
Join Date: 07-05-13
Location: Ireland
|
Hav stick with ss bolts until can find supplier ss u bolts as none here sll galvo
Ones |
|
04-04-2014, 03:19 PM | #4 |
Knows what a fatty is.
Join Date: 07-05-13
Location: Ireland
|
Also no thermometer built in
Be fittin 3 magnetic ikea ones 2 for meat one for drum temp |
|
04-04-2014, 03:30 PM | #5 | |
is One Chatty Farker
Join Date: 02-10-14
Location: Smithville Tx
|
Quote:
?????? ?????? maybe i'm just confused alot today,...but,.....what?
__________________
Life is too short for terrible food. |
|
|
04-04-2014, 03:44 PM | #6 |
Knows what a fatty is.
Join Date: 07-05-13
Location: Ireland
|
Most uds have the dial thermometer on side
I am going skip that I stead i have 3 chep elec display thermometers from ikea They have magnetoc base so i can make nice Stainless shelt on drum amd they wil magnet on Will havr 3. One to shoe drum temp and other 2 be used for meat temp |
|
04-04-2014, 04:26 PM | #7 |
is One Chatty Farker
Join Date: 02-10-14
Location: Smithville Tx
|
Oh,... ok.
__________________
Life is too short for terrible food. |
|
04-04-2014, 06:43 PM | #10 |
somebody shut me the fark up.
Join Date: 07-18-07
Location: Oklahoma
Name/Nickname : jeanie
|
Sounds like you've got it planned out well. Good luck to you! Looking forward to seeing your photos!
__________________
jeanie Lifetime member of the Society for the Preservation of Authentic Royal Magical Rare Kaskaskian Peppers (Thanks Ash :)) RIP Ash, you are missed http://cowgirlscountry.blogspot.com/ |
|
Thanks from:---> |
04-04-2014, 07:02 PM | #11 |
is One Chatty Farker
Join Date: 11-13-08
Location: Islip, NY
|
Depending on your quality of stainless your magnets may not stick. Send me round trip airfare and I'll stop out and give you a hand. I'll buy the Guiness. Keep us posted, sounds like a good build.
__________________
"People who drink light 'beer' don't like the taste of beer; they just like to pee alot." GRIM REAPER SMOKERS [B]-[/B] [I]"BBQ To Die For"[FONT=verdana, arial]™ [/FONT][/I]Under the [B]"LENIENT"[/B] direction of Pit Master Tim. 22.5 OTG, 18.5 OTS, 18.5 WSM, Chargriller Duo with optional side fire box. [COLOR=red]"Founders Club" Operation BBQ Relief.[/COLOR] |
|
Thanks from:---> |
04-05-2014, 08:43 AM | #12 |
Knows what a fatty is.
Join Date: 07-05-13
Location: Ireland
|
Well hole saw was blunt so couldnt cut hole for chimney. Also ran oits paint.
Gotta get paint and turesday go dowb father in law and weld chimney in Got my head mixed up in rush in rain and put my 3 wheels in wrong. Measured 130* not 120* so rear 2 caster wheels 10* too close Minor realy Have pics will lost them up Worst case ill hang tenp gauges on small plates Everythin ready bolt on once gey paint Daddy dsy care now so might get it tomorrow 2hour burn and 4 hours today. Say 2hr max all that left |
|
Thanks from:---> |
04-05-2014, 08:51 AM | #13 |
Babbling Farker
Join Date: 05-09-07
Location: God's Country Ossipee-Osceola NC
|
looking forward to you cooking on it...
|
|
04-05-2014, 09:16 AM | #14 |
Knows what a fatty is.
Join Date: 07-05-13
Location: Ireland
|
Anyone ever over here i have bbq, smoker and pizzs oven
|
|
04-05-2014, 01:08 PM | #15 |
Knows what a fatty is.
Join Date: 07-05-13
Location: Ireland
|
my fire basket
barrel burn out vent holes lower vent and casters. can see where had hand polish last bit old paint inner drum can see asll holes drilled and basket in lid marked up lid setup. need weld chimney on tomorrow hope do final paint and bolt together |
|
|
|