|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
02-04-2013, 07:26 AM | #1 |
is Blowin Smoke!
Join Date: 01-09-13
Location: Tupelo, MS
|
BWS Question
I have mentioned before that after years of cooking on offset smokers I bought a Backwoods Smoker Party model. I have cooked on it about 7 times learning more each time. In fact – from the suggestions on this forum – I added the 2 inches of expanded steel to the charcoal tray and picked up an extra cooking time – it worked like a dream.
However I still have a serious issue. Although the cooker is putting out good meat I am still having issues with “SOFT BARK”. Yesterday while cooking ribs I threw on some chicken breasts. I followed my normal – brine and rub procedures and after about 2 hours I went to sauce and the bark was so soft that it moved under the brush. I started the cook with 1.5 gallons of water and added roughly every 2.5 hours. When cooking on my offset I always put a pan of water in front of the firebox but I have never had to deal with this much moisture before. I have cooked on a WMS before and never had this much moisture – but currently I can’t seem to set the bark on this Party model. Any suggestions? |
|
02-04-2013, 07:32 AM | #2 |
Knows what a fatty is.
Join Date: 12-06-12
Location: Mt Holly, NJ
|
Where are you cooking at in your BWS? Your best chance for bark is at the very top where its the hottest. If you are looking for a very firm and thick park you will have a hard time if you are using water in the pan. You can try sand, lava rock, or foil balls to create a drier environment.
__________________
BWS G2 Party w/custom cart, Thermapen (does yours have flames.......mine does so be jealous) |
|
02-04-2013, 07:47 AM | #3 |
is One Chatty Farker
Join Date: 06-20-11
Location: Mooresville, NC
|
You are cooking on a water smoker. They tend to be very humid environments. When I owned my BWS, I was particularly amazed by the amount of steam in the cook chamber. It produced very tender/moist meat but the bark was never very firm. To me, that was an acceptable trade off.
That being said, you could try running the unit dry (without water) and see how you like it. Fill the water pan with play sand to act as a heat sink or maybe just foil it over but it will run much hotter.
__________________
Hillside BBQ 2013 Stumps Classic - Delivered 4/15/13 Large BGE - Rescued 2012 2010 WSM 22.5" 2010 Weber genesis gas grill Rescued 22.5 Weber One-touch gold Yellow Thermopen BBQ Guru CyberQ 2011 Built UDS - Retired |
|
02-04-2013, 07:47 AM | #4 | |
Knows what a fatty is.
Join Date: 09-08-10
Location: Plymouth,IN
|
Quote:
|
|
|
02-04-2013, 08:38 AM | #5 |
is Blowin Smoke!
Join Date: 01-09-13
Location: Tupelo, MS
|
I cooked the chicken on the middle rack in front of the door thermometer.
I don’t mind soft bark and I enjoy the moist meat – there is a difference but I did not expect the bark to move after 2 hours of cooking. It did not set at all. I cooked the ribs on the top rack and though the bark was soft to the touch it did not move when I sauced them. Is that normal for a BWS????? |
|
02-04-2013, 04:09 PM | #6 |
Is lookin for wood to cook with.
Join Date: 02-02-13
Location: NorthEast
|
I have been sizing up a Backwoods Smoker and barkless bbq is a concern I also have. Probably not enough to put me off buying one but enough that I've google'd for images and such.
I'm pretty sure it's a technique issue. With the amount of competitions won by BWS I just can't believe there isn't a way to get some great bark. Sand (and trial and error, of course) seems to be the ticket. Have a look here: The gent in the video uses sand exclusively on his Backwoods. He talks about it in the comments. Hope posting the link in a forum is ok. I like to think about bark the way I think about beer; if my pint doesn't have a head on it I'll still drink it, it's not 100% right (for me) but I'll still get it down my neck. Same with bark and bbq. |
|
02-04-2013, 04:47 PM | #7 |
is one Smokin' Farker
Join Date: 09-28-09
Location: Oil City, PA
Name/Nickname : Sean
|
What exactly were you trying to get bark on? Ribs and chicken? What temps are you cooking at? Are you using lump or briquettes?
__________________
Red Valley BBQ ~ Firefighting BBQ Team (retired) ~ former KCBS CBJ ~ (3) 270 Smokers ~ (2) Chargiller Akorn ~ (4) Weber Kettles ~ La Caja China ~ Oklahoma Joe Bronco Drum Smoker |
|
02-04-2013, 05:02 PM | #8 |
is Blowin Smoke!
Join Date: 01-09-13
Location: Tupelo, MS
|
Thanks for posting the video.
I have emailed BWS and found out that I can purchase a heat diverter that will ease the moisture build up. How much I could not find out but right now the fire is hitting the water pan directly. I am not sure it will solve all the issue but it seems it will help at least in theory. I am a low and slow guy and I cook around 230 and I do want some moisture in the pit but as I stated earlier – I put the chicken in and after two hours the rub was not set – it wasn’t even thinking about setting. I had ribs on the top rack and the bark was soft but it did not come off when I brushed on sauce. This weekend I plan to do a run with sand in the water pan and see what it looks like but to be honest I hate to have a water smoker and not use it for that purpose. I also plan to order the heat diverter and get it installed as well. I know a good welder and he will work for beer and BBQ! |
|
02-04-2013, 06:31 PM | #9 |
Babbling Farker
Join Date: 05-19-11
Location: EAD
|
Won't need a welder. Isn't there a channel in your firebox that looks like a sheet of metal will fit on it? Heat diverter is just a sheet of metal that is removable
|
|
02-04-2013, 07:20 PM | #10 |
somebody shut me the fark up.
Join Date: 05-03-06
Location: Ventura, CA
|
I finish my meats on the top shelf, if I want more crust and/or bark.
__________________
Peace and Smoke, BBS Powered by the West Coast Offense: Big Poppa Smokers and Simply Marvelous BBQ - "Walk with Us" My weapons: Humphrey's Smokers |
|
02-05-2013, 07:15 AM | #11 | |
is Blowin Smoke!
Join Date: 01-09-13
Location: Tupelo, MS
|
Quote:
|
|
|
02-06-2013, 09:32 AM | #12 |
is One Chatty Farker
Join Date: 11-15-08
Location: Lake View, New York
|
Hi John...get the diverter, it will keep temps more even in cooking chamber, crank it up on the chicken. 275--325--and add white sugar to the rub...
start your ribs a littel hotter then slow it down, but I cook w/water and the bark, on butt is good same on brisket, sure better than takin g a chance on drying the rest out, also try papper if you foil in the end..I dont foil...that really softens the bark..
__________________
[I][FONT=Comic Sans MS]TwinTech Pro Double, Backwoods Fat Boy, TwinTech Hawg Kooker, FE 400, SP SPK 700, Empty check book and understanding wife...sometimes..[/FONT][/I] |
|
02-06-2013, 09:50 AM | #13 |
is Blowin Smoke!
Join Date: 01-09-13
Location: Tupelo, MS
|
Thanks for the tip Big – I ordered the diverter yesterday. I have to give props to BWS – they were helpful and answered all my questions.
It is just a new way of cooking for me but I can tell I am going to love it. |
|
02-06-2013, 10:46 AM | #14 |
somebody shut me the fark up.
Join Date: 10-27-06
Location: Bothell WA
|
Bark is overrated.
__________________
Brian - Left Hand Smoke BBQ PNWBA 2010 Team of the Year BGE's/WSM's/Pellet Pro WSM/BWS Gater/BDS Clones/Cookshack 008/Weber Performer w EZ-Que/Cajun Bandit/Rib-O-Lator Test Pilot/La Caja China/BBQ Guru/Weber 1000 RK Drum Coffee Roaster Follow Left Hand Smoke on Facebook!http://www.facebook.com/pages/Left-H...462391?sk=wall KCBS CBJ/PNWBA CBJ www.pnwba.com |
|
02-06-2013, 11:02 AM | #15 |
is Blowin Smoke!
Join Date: 01-09-13
Location: Tupelo, MS
|
Not in my house
I live in a house with 3 skinney women who eat salad Mon through Friday - when the weekend comes and they naw on BBQ they want the bark. |
|
Thread Tools | |
|
|