I've re-furbished my Kamado and would like to add a Stoker temperature contoller. My smoker had a gas option on the draft door (used to light charcoal) which I don't use- so I've modified it to use as an inlet for the Stoker blower (pics below). I just cut it off with a dremel. The hole is 1 11/32 inches (almost 1 3/8th")- inside diamater. I'll modify the handle to put in when the blower is not in use, or use a silicone stopper. Does anyone use the Komodo Kamado or BBQ guru Stoker adapters and if so know what the outside dimension of the bulkhead/tube is?
https://www.rocksbarbque.com/product.gc?ID=18
https://www.rocksbarbque.com/product.gc?ID=45
https://www.rocksbarbque.com/product.gc?ID=18
https://www.rocksbarbque.com/product.gc?ID=45
