|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
11-08-2011, 10:31 AM | #8851 |
Is lookin for wood to cook with.
Join Date: 02-05-10
Location: Pewaukee, WI
|
Holy crap this is the mother of all threads. So here's my question, I have a bbq guru that doesn't get any use at all anymore. Would I be able to drill one hole in the bottom instead of 3 and just use the guru to control temps? Everything else looks standard and I plan on using the existing top and adding a smoke stack for looks. Thoughts?
|
|
11-08-2011, 11:12 AM | #8852 |
Found some matches.
Join Date: 09-13-11
Location: Costa Mesa, CA
|
Try some Metal Prep, Metal Etch (Phosphoric Acid) to clean that out. You may not want to breath whatever residue is in there during the burn out. Metal prep will take off whats there and then clean out well before the burn out. Plus use it to prep the outside really well for the paint.
|
|
11-08-2011, 06:26 PM | #8853 | |
Found some matches.
Join Date: 08-19-09
Location: topeka kansas
|
Guru
Quote:
Keep us informed on what you do and the results. |
|
|
11-09-2011, 08:09 PM | #8854 |
Found some matches.
Join Date: 06-21-11
Location: Memphis Tn
|
From: coewar
NOW FOR SOMETHING CHALLENGING. I did a smoke last week for a shelter in town, as mostly the whole state was out of power due to the big snow storm we got. I usually use plain charcoal briquettes but this time I had some bags of hardwood lump coals. I love using it for grilling, but wasn't sure about smoking. So I tried it. After 1 hour, I really didn't like the smell coming out of the smoker.. ashtray-like. To avoid the food getting its own ashtray taste, I wrapped the 4 pork butts I was doing (2 smokers) in foil and left it over night. Early the next morning, all the coals had just about gone out, and the temperature was dropping. So I purchased some regular briquettes and saved the rest of the cook until ready. The meat was very tender (all wrapped up) and tasted fine with some brown sugar added, though it had a slight ashtray smell. So the question.. how would you smoke with the hardwood lump coals? The 2 problems I saw was the nasty smell of it smoldering, and very difficult heat control and length. It was considerably hotter in the beginning, and it all burnt out by the next morning. I frequently do smokes overnight with plain charcoal briquettes without any issues. And finally, say there is a technique to doing this with hardwood lump coals. Is there a reason to bother with it? I merely HAD them so wanted to use them, but wouldn't buy them for smoking. Definitely for grilling though![/QUOTE] I built my first drum a few weeks ago as well I have just started using lump. I have been fighting bad smoke and temp swings everytime I use the drum. I read this yesturday, I today I did a test burn with only bricketts. WOW. FINNALLY thin blue smoke and stable temps I was about to give my drum away, but I think I'll keep it a little longer now. No more lump in my drum. Thanks Last edited by spareheat; 11-09-2011 at 08:15 PM.. Reason: quote did not work |
|
11-09-2011, 08:33 PM | #8855 |
somebody shut me the fark up.
Join Date: 10-27-06
Location: Bothell WA
|
Lose the notion of getting "sweet blue smoke" from the drum if you are cooking direct;
It's the "wonderful white" that you want! Hawgman gettin' a snoot full! Now g'wan and get you some!
__________________
Brian - Left Hand Smoke BBQ PNWBA 2010 Team of the Year BGE's/WSM's/Pellet Pro WSM/BWS Gater/BDS Clones/Cookshack 008/Weber Performer w EZ-Que/Cajun Bandit/Rib-O-Lator Test Pilot/La Caja China/BBQ Guru/Weber 1000 RK Drum Coffee Roaster Follow Left Hand Smoke on Facebook!http://www.facebook.com/pages/Left-H...462391?sk=wall KCBS CBJ/PNWBA CBJ www.pnwba.com |
|
11-09-2011, 08:36 PM | #8856 |
is One Chatty Farker
Join Date: 08-24-08
Location: Los Angeles
|
I get good white smoke with my UDS too!
__________________
....UDS....Mini-WSM....Midi-WSM....Mod-ECB....22.5-OTG....34"wood fired pizza oven.... |
|
11-09-2011, 08:52 PM | #8857 |
is One Chatty Farker
Join Date: 08-23-10
Location: Austin Texas
Name/Nickname : D
|
Weird I always get sweet blue smoke when I cook.
__________________
Pitmaker Magnum Snipper * UDS* Copper Kettle |
|
11-09-2011, 09:06 PM | #8858 |
Found some matches.
Join Date: 09-14-11
Location: Jonesboro AR
|
I got my UDS built and did a seasoning burn and noticed that the fire only lasted about 4 hours (I had about 6-7 lbs of charcoal) and with my vents all wide open, it never really got above 225, which is perfect for my smoking. I am trying to use the ash pan out of an old brinkmann smoker. I drilled holes around the sides to get it to draft.
I did my second cook tonight and used 2.5 in bolts to raise the pan off of the bottom of the barrel and added a few more vent holes in it to help it out. I was able to cook at around 210 for 5.5-6 hours tonight before the temps started to drop. I took my chicken off to finish it in the oven and then shook the pan and the coals all started right back burning. Does anyone have experience with this type of fire pan? It looks like the ash may be snuffing out the fire. It may be best for me to switch to a fire pan with a grill grate for the bottom and the expanded metal for sides???? I like the smoker not getting over 220 or so, but I need it to be able to go for longer. Thanks for the help. |
|
11-09-2011, 09:14 PM | #8859 |
somebody shut me the fark up.
Join Date: 05-03-07
Location: New Baltimore, Mi.
|
Your not getting enough air and the ash is snuffingout the heat. Should be able to go 8-10 hrs on that amount of fuel. Usevexpando & a grate like the bible says.
__________________
Owner of Bubba's BBQ & Catering L.L.C. Beer Snob I cook the #bestbrisketnorthoftexas. Get over it. #detroitporkmafia BBQ Person of the Year 2013 |
|
11-09-2011, 09:24 PM | #8860 | |
is One Chatty Farker
Join Date: 08-23-10
Location: Austin Texas
Name/Nickname : D
|
Quote:
__________________
Pitmaker Magnum Snipper * UDS* Copper Kettle |
|
|
11-09-2011, 09:27 PM | #8861 |
Found some matches.
Join Date: 09-14-11
Location: Jonesboro AR
|
I have a kettle lid from a knockoff Weber for my lid. Just has the one spin dial exhaust. Is that enough exhaust?
|
|
11-09-2011, 09:31 PM | #8862 |
is One Chatty Farker
Join Date: 08-23-10
Location: Austin Texas
Name/Nickname : D
|
Ya does it sit tight on the drum, if its real loos on the drum you should try using some high heat silicone around the inside of the lid rim.
__________________
Pitmaker Magnum Snipper * UDS* Copper Kettle |
|
11-09-2011, 09:33 PM | #8863 |
Found some matches.
Join Date: 09-14-11
Location: Jonesboro AR
|
Ok. It is real tight, I have to force it down on there to make it fit.
|
|
11-09-2011, 09:39 PM | #8864 | |
is One Chatty Farker
Join Date: 08-23-10
Location: Austin Texas
Name/Nickname : D
|
Quote:
EDIT Ya it does sound like your doing everything right, it does sound like the ash is snuffing the fire to me.
__________________
Pitmaker Magnum Snipper * UDS* Copper Kettle |
|
|
11-09-2011, 09:41 PM | #8865 | |
is one Smokin' Farker
Join Date: 04-15-07
Location: Bisbee, AZ
|
Quote:
__________________
55 gallon smokin' UDS BBQ Grillware gas grill Pit-Boss 700 Deluxe Traeger Lil Pig |
|
|
Tags |
divided circle template, uds, ugly drum, ugly drum grill, ugly drum smoker |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ugly Drum Smoker | ironslob | Q-talk | 2 | 09-19-2010 10:16 AM |
Ugly Drum Smoker - Need Help | Bartkowiakj | Q-talk | 10 | 06-18-2010 09:38 PM |
One Ugly Drum Smoker | Steve_B | Q-talk | 15 | 09-21-2009 10:32 PM |
My (not-so) Ugly Drum Smoker. | hav | Q-talk | 47 | 11-05-2008 02:30 PM |
Ceramic Cooker Meets Ugly Drum Smoker - BUDCS - Concept Drum Discussion | Hook_Line_and_Sinker | Q-talk | 9 | 04-26-2008 02:24 PM |
Thread Tools | |
|
|