A
akayaker
Guest
Yes, another BDS build.
I have been reading through some of the threads here and I can't resist the BDS build. I am currently smoking on a electric ECB and want to move to a charcoal rig. I am a DIY guy so this is perfect for me.
I have been gathering parts and to this point haven't spent a dime. Thats the other part of this build.. see how close to free I can get.
I ended up getting a new barrel for free and have managed to source the rest of the parts for free too (lots of people owe me favors). The only things I may have to purchase are the grates. If I end up getting a Weber Kettle then I will have all that I need. Still working on that one.
Only one problem and i'm not sure that it is a problem. My drum is 34" tall. The basket will be 3" off the bottom ad the cooking grate will be 24" above that. If you do the math that only leaves me 7" of cooking space. I don't think thats enough. I would feel more comfortable with 8.5 or 9. So the question is will lowering the cooking grate 2" really make that much of a difference? If I end up finding a Weber lid this won't be a problem, but I want to build to spec first and then trick it out later if possible. I could also lower the basket to 2.5" or maybe to 2" and lower the cooking grate as well. Split the difference on the top and bottom. Advice please.
Also,
Does it matter if you burn the barrel before drilling and welding or is it not a big deal either way. I was going to drill and weld everything up before burning, but thought it better to ask if it really mattered. I thought the vent holes would also make a hotter burn too. Thoughts?
Thanks for the help. I can't wait to get this done and throw on a butt. I fully expect my friends to want one of these babies as well.:mrgreen:
Heres a pic of the drum and lid. The drum was new but it does have some sort of coating inside. It will have to be burned. Also note the sirring bracket in the bottom. This will have to be removed.
Here's the ash pan and another pic of the ash pan in the drum. Fits like a glove! It does need some trimming around the edge and will be burned with the drum.
Expanded metal and legs. The legs will be cut to 3".
Here she is all marked up.
I have been reading through some of the threads here and I can't resist the BDS build. I am currently smoking on a electric ECB and want to move to a charcoal rig. I am a DIY guy so this is perfect for me.
I have been gathering parts and to this point haven't spent a dime. Thats the other part of this build.. see how close to free I can get.
I ended up getting a new barrel for free and have managed to source the rest of the parts for free too (lots of people owe me favors). The only things I may have to purchase are the grates. If I end up getting a Weber Kettle then I will have all that I need. Still working on that one.
Only one problem and i'm not sure that it is a problem. My drum is 34" tall. The basket will be 3" off the bottom ad the cooking grate will be 24" above that. If you do the math that only leaves me 7" of cooking space. I don't think thats enough. I would feel more comfortable with 8.5 or 9. So the question is will lowering the cooking grate 2" really make that much of a difference? If I end up finding a Weber lid this won't be a problem, but I want to build to spec first and then trick it out later if possible. I could also lower the basket to 2.5" or maybe to 2" and lower the cooking grate as well. Split the difference on the top and bottom. Advice please.
Also,
Does it matter if you burn the barrel before drilling and welding or is it not a big deal either way. I was going to drill and weld everything up before burning, but thought it better to ask if it really mattered. I thought the vent holes would also make a hotter burn too. Thoughts?
Thanks for the help. I can't wait to get this done and throw on a butt. I fully expect my friends to want one of these babies as well.:mrgreen:
Heres a pic of the drum and lid. The drum was new but it does have some sort of coating inside. It will have to be burned. Also note the sirring bracket in the bottom. This will have to be removed.
Here's the ash pan and another pic of the ash pan in the drum. Fits like a glove! It does need some trimming around the edge and will be burned with the drum.
Expanded metal and legs. The legs will be cut to 3".
Here she is all marked up.