Going to try to spiral(pre-cut) my own ham

Garyclaw

Babbling Farker
Joined
Aug 5, 2009
Messages
4,995
Reaction score
8,812
Points
0
Age
69
Location
NE OH-IO
Wondering if anyone else has tried this. Gonna use a long thin carving knife. I promise to post pron but wanted to get a little in-put first.:confused: In other words ,cut it BEFORE I bake it on the grill. Or am I just going about it backwards?
 
Check out this beauty:

spirocutting_drframe.gif


SPIROCUTTER_model_T2000_OK.jpg


It's a little pricey though...:p
 
From what I've read if you cut it FIRST it will dry it out. I haven't tried either method but if makes since. I'll try it after I cook the first one I do.

JA
 
From what I've read if you cut it FIRST it will dry it out. I haven't tried either method but if makes since. I'll try it after I cook the first one I do.

JA

You are absolutely correct. If you slice it first it will come out like shoe leather. A friend of mine did it and it was aweful. Always slice it after you have cooked and rested it.
 
From what I've read if you cut it FIRST it will dry it out. I haven't tried either method but if makes since. I'll try it after I cook the first one I do.

JA
Ya. I forgot about the dang " drying out" part. Maybe I'll go ahead and cook it through, cut it and put my glaze on, then back on thr grill to finish.
 
don't know why?... But here ya go..

Dr. Chicken’s Double Smoked Ham
Recipe Number: 124
Contributor: john
Rating: Recipe Unrated
Rate This Recipe
Review This Recipe Serves: Glazing Sauce
Calories Per Serving: NA
Preparation Time: NA
Difficulty:
Print Friendly Version
Recipe is Unreviewed Ingredients:½ cup brown sugar ¼ cup maple syrup (use dark grade B real maple syrup if available)(dark grade B has more flavor than grade A) ¼ cup honey 2 Tbsp cider vinegar 1 – 2 Tbsp Worcestershire sauce 2 Tbsp instant coffee granules (use a good brand because it makes a difference) 1 Tbsp dry ground mustard 2 Tbsp orange juice concentrate (a good brand provides better flavor) Blend all ingredients in a sauce pan with a wire whip and heat slightly until everything combines into a viscous or thick looking sauce.Cooking Instructions:Ham should be a fully cooked or partially cooked ½ shank variety or can be shoulder variety (water added can be used, as long as the water added does not exceed 23% water added product.) If it is pre-smoked with hickory, that seems to work out best. Patti/Jean or Cooks among the best, but other varieties can be used! Update: Use a full shank ham if you want. They work wonderful and they leave less good eatin' areas exposed to the heat to dry out. I've cooked up to a 26 lbs full shank ham. Absolutely one of the best too! An uncooked ham works well too. That way you don't have to limit yourself when choosing a ham. Cooking instructions for the oven: Score outer skin of ham to a depth of ½ inch in a crisscross diamond pattern. This will allow the glazing sauce to penetrate below the skin, into the actual ham. Place ham (un-glazed) into a shallow roasting pan or roasting rack. If pineapple and cherries are desired on the outside, add them when you start the glazing process. Cook in oven @ 275° - 300° with a loose tent of aluminum foil over the top for 25 to 30 minutes per lb. Baste with glazing sauce the last hour of cooking time and continue to cook until the ham reaches an internal temperature of 140°. Remove from oven and allow to sit covered for 20 to 30 minutes before carving! Cooking instructions for ceramic cooker cooking: This can be done on a grill over indirect heat or in a water smoker or other type of cooker, again over indirect heat or “low & slow” type cooking. Do not tent over ham if done on grill, water smoker or other cooker. this would prevent smoke from penetrating the ham. Place water soaked chunks of mesquite, hickory or pecan (we prefer the smoke of pecan over all the others) on coals 5 minutes before putting ham on cooker. This will allow the ham to obtain maximum smoke flavor during the second cook cycle. ( the first cook cycle is the cycle the processor uses.) If even more smoke flavor is desired, place ham in freezer for 1 to 1 ½ hours prior to cooking to allow outer edges of ham to start to freeze. Go easy on this procedure. you don’t want the ham frozen hard! If using a water smoker, fill water pan ¾ full with hot water and add 2 cups of orange, pineapple, or orange/pineapple mix, sweetened grapefruit or apple juice to the water. (all of them act as tenderizer as the steam penetrates the meat.) (I use a ¾ full drip pan when cooking on the Eggs, filled with a 50:50 mix of water and orange juice.) Again, cook for 25 to 30 minutes per lb. until internal temp on the ham shows 140°. A couple of books suggest 145° and 160° respectively. Shirley O. Corriher in her book “CookWise” suggests 140°. We found this to be exactly right. After removing from the Egg, it will climb up to 145° internally. The ham will retain it moistness and the flavor will go thru out the ham this way. Update: Pull the ham from the cooker at 135° internal. Even if it is an "uncooked" ham. Jim Minion and I have been playing around on this issue. Both of us feel 135° internal is enough to carry the ham up to 145° internal while you let it rest wrapped in foil for an hour or so. I wrap the ham in a double wrap of heavy duty foil. That seals the juices inside (relatively speaking!) and keeps the ham from starting to dry out during the resting period. The 135° internal tempperature suggestion is right in line with Shirley O. Corriher and her book "CookWise". This is one gal that has her act together! It is a great reference book for a lot of things. Start your cooking process at 225° on the dome thermometer of your ceramic cooker. Then let it gradually creep up to 250° to 260°. The 275° suggested temp. is a mit too high, in my opinion and after cooking 50 to 60 of these over the last 3 or 4 years. Baste ham with glazing sauce every 10 to 15 minutes during the last hour of cooking time. Glazing compound will burn, so do not start glazing the ham until the internal temp of the ham reaches 120°. Someone on another forum suggested removing all the skin before cooking. DON'T!!!!! That's the easiest way to ruin the ham by drying it out. Serving Suggestions:NOTE: The secret to this process is plenty of smoke and the real maple syrup and granular coffee crystals in the glazing sauce. Use a cheaper cut of ham like mentioned before, and people will think you bought an expensive ham that you had to “hock” your kids for! Yuk! Yuk! (see my pun there?) The glazing sauce will give the ham a fantastic taste, smell and color! Update: Use the "Dr. Chicken's Sweet Kiss of Death" injectable marinade recipe to take the ham up 3 or 4 notches. I can't emphasize enough how much the injectable marinade adds to the finished product. You and your family will be in 7th heaven woofing it down. I'm including it in this e-mail. If you start glazing the ham at 120° internal, you'll only have to apply the glaze twice. Do this 30 minutes apart. That way you won't lose a lot of cooking time trying to apply it every 15 minutes. 2 applications of the glaze will do a wonderful job if you make sure you get it into the cut areas. NOTE: Don't use a spiral cut ham the first time out. They tend to dry out too easily! If you are forced to use one, use 1 & 1/2 X the "Sweet Kiss of Death" injectable marinade I suggest. That will prevent it from drying out during the cooking process. Also, be sure you keep your cooker down to that 260° as a maximum on the dome. Someone on another forum suggested removing all the skin before cooking. DON'T!!!!! That's the easiest way to ruin the ham by drying it out. Additional Comments:Dave Spence (Dr Chicken)
 
:icon_shock1: Yikes! Guess I better get a cookin. This baby is a 12# hogleg. Think I'll getter done today and re-heat tomorrow.
 
Back
Top