Our Homepage | Donation to Forum Overhead | Welocme | Merchandise | Associations | Purchase Subscription | Amazon Affiliate |
|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
03-19-2012, 07:56 PM | #9331 |
Full Fledged Farker
Join Date: 09-02-11
Location: Evans, GA
|
Did 2 boston butts this past weekend. Smoked for about 10 hours then had to finish up in the oven as we had a neighborhood thing to attend to. But the smoke went perfect; easy to control the temps and I was around 225 to 245 all day w/o messing with it. The pork turned out pretty good; I can tell the flavor difference with the open pit taste and the smoke was perfect. I did foil wrap and place in the oven to finish it upto 200* I pulled the next morning and some of the pieces were dry but not that bad. Was wondering if any of you all experience dry food with the uds? I'm a non foiler for ribs and do foil my butts but only when I want to shut the smoker down for the night. My last smoker I had a sand bowl diffuser and never had dry pieces.My ribs last week were ok; some of the ends were dry though. I have a square charcoal box. Should I explore a diffuser?
|
|
03-20-2012, 06:37 PM | #9332 | |
Knows what a fatty is.
Join Date: 02-29-12
Location: Suburb of NYC
|
Quote:
hey, sorry for another picture request but do you have one of the racks out of the drum showing how you set it up? One of the other pics shows a top down view which was great but I'm still a little unclear. Thanks btw, you've been a great help like everyone here. |
|
|
03-20-2012, 07:00 PM | #9333 |
is One Chatty Farker
Join Date: 08-23-10
Location: Austin Texas
Name/Nickname : D
|
My lid plugs and my side table I might have posted this awhile back but with the growth of this thread I'm not going to look and see
__________________
Pitmaker Magnum Snipper * UDS* Copper Kettle |
1 members found this post helpful. |
Thanks from:---> |
03-21-2012, 09:46 AM | #9334 |
Knows what a fatty is.
Join Date: 02-29-12
Location: Suburb of NYC
|
So I made my fire basket. While making it I decided to leave it tall. It's about 17" high over all, 13" or so from the grate to the top. I figured I could cut it down later if I wanted but by doing this I thought it shouldn't affect heat too much. Also, maybe I can use the pizza pan top as a diffuser of sorts.
I know it's not quite straight, I need to fiddle with the legs a little. |
|
03-21-2012, 09:14 PM | #9335 | |
Knows what a fatty is.
Join Date: 11-26-10
Location: Somewhere, CT
|
Quote:
You make legs for the grates. Each leg would require 2 "fender washers" (which are just large ones), a 8 or 6 inch long carriage bolt that is large enough to not fall through the grate below, but small enough so the bolt part fits through the grate it's going to be attached to. 2 nuts (one of which could be butterfly). If you don't use carriage bolt, you can use some regular bolt and create "feet" for it on the bottom using 2 more fender washers and 2 more nuts. This would be to prevent the leg from falling through the grate it's standing on. So you just put 1 nut on the bolt and thread it maybe 1 inch, then a fender washer and then poke it through the grate you're attaching, and then the other fender washer and the other nut. Tighten them just a bit for now. Do the same for the other legs.. 3 legs or 4 legs for more sturdiness. Then make sure it sits on something flat and is somewhat "level" so it doesn't wobble. tighten all the nuts just a bit. Too much and the fender washers or the grate wires will start to bend. And there you go. Make another one for another level to put on top. |
|
|
03-22-2012, 12:34 PM | #9336 | |
Knows what a fatty is.
Join Date: 02-29-12
Location: Suburb of NYC
|
Quote:
|
|
|
03-22-2012, 12:44 PM | #9337 |
Knows what a fatty is.
Join Date: 02-29-12
Location: Suburb of NYC
|
Started on the intake holes with a titanium bit then the hole punch. Fortunately I started with a 3/4" punch but found out afterwards that it doesn't make a 3/4" hole. It's a bit oversized, almost 7/8". This greenline punch is made for electricians I believe (holes in panels, etc) and I suspect the 3/4" is made to fit the connectors that fit on the end of 3/4" conduit, hence why they are a little oversized.
So ordered a step bit to drill out to 1". Hopefully someone will avoid the mistake I almost made with this bit of info. |
|
03-22-2012, 01:16 PM | #9338 |
is one Smokin' Farker
Join Date: 04-22-11
Location: Cleveland, OH
|
I have noticed that more and more people are using this for their exhaust. I know cowgirl has this and I have seen an increase. Is the advantage to this just more control of air flow and temperature? I feel like all those exhaust nipples just makes for more work than simply sliding a vent. It does seem pretty easy to instal if you need an exhaust for a flat lid, however, because all you need is to drill some holes. also did you weld the nipples in place or use jb weld or something of the sort or just screw them in?
__________________
Mark...UDS, 22.5 weber knock-off kettle, gasser. GO BROWNS!!! |
|
03-22-2012, 01:43 PM | #9339 |
Got rid of the matchlight.
Join Date: 02-23-12
Location: San Jose , California
|
My First UDS build and smoke
So I Started to build my first UDS before discovering this awesome forum. Turns out I should have done a bit more research before I started to acquire my parts. I ended up buying 4 food grade drums from a guy on CL. OPPSSSS ya come to find out you guys talk about this "Dreaded Red Liner" and all 4 of my barrels have it. After a couple attempts at removing it with various methods the best i came up with was an angle grinder with a 36 grit flap disk. I went to town on it for about an hour and it was clean as new. I on the other hand was covered debris. That was basically the hardest part of the build. I burned the outside with a weed burner and a few pallets inside just to be safe. Drilled a few holes for my hardware, welded on some clamps for my lid and ball valve support, painted her with hi temp black. I must say it came together very easy after that liner was out. I couldn't wait too long to test it out so I smoked some bacon wrapped jalapenos and some links. They came out Amazing! So then next day I picked up a 8lb Boston Butt. I kept it pretty simple about 230-240 grill temp for about 81/2 hours. I didn't get the internal temp quite as high as I would have like due to hungry guests. I ended up pulling it of the grill at about 190 let it rest and pulled it by hand. Everyone said it was great but the bone needed a little persuasion to come out so i know it could have used more time. More practice for me. Here are some pics of the goods!
After defeating the red liner Any reason just to use this |
|
03-22-2012, 01:47 PM | #9340 |
is one Smokin' Farker
Join Date: 04-22-11
Location: Cleveland, OH
|
Looks good from here. I love the magnets for the air intake. Cheap, simple, and easy.
__________________
Mark...UDS, 22.5 weber knock-off kettle, gasser. GO BROWNS!!! |
|
03-22-2012, 03:41 PM | #9341 |
Got rid of the matchlight.
Join Date: 02-23-12
Location: San Jose , California
|
Thanks! Helps that I work at a magnet shop. I also used a ceramic magnet for my exhaust damper.
|
|
03-23-2012, 10:14 PM | #9342 |
Got Wood.
Join Date: 04-28-10
Location: Calexico, CA
|
This is the cover for my UDS:
Is for this:
__________________
"Love can mend your life, but love can break your heart" - THE POLICE |
|
03-25-2012, 07:53 AM | #9343 |
Found some matches.
Join Date: 07-30-11
Location: Kentucky
|
hi ya'll.... been having a lot of luck with sam's club "best of the west" mesquite lump charcoal. it keeps a long, slow heat (235) for hours in my udr. anyone tried it? comes from mexico...
http://www.samsclub.com/sams/shop/pr...oductId=181568
__________________
www.manofmettle.com |
|
03-30-2012, 08:51 PM | #9344 |
Knows what a fatty is.
Join Date: 02-29-12
Location: Suburb of NYC
|
So my first UDS is almost done, and a big big thanks to all the advice from folks on here.
All that's left is some kind of side handles. Since its stainless I thought these might be cool http://www.sea-dog.com/groups/2430-s-style-stud-cleat but seem pretty steep. I'll tally up what it cost once totally done but ball park is $150 including $15 step bit which is toast for 1" now but that's ok, it was a trouper. Since it was a free stainless drum I went all stainless parts, bolts, etc (except fire-basket) so it could have been a bit less. My hope is if I got it close to right I might use it forever. Again, thanks and thanks and thanks to everyone, lately coewar in particular. Doing some wings on it now, couldn't wait for finding the handles. Been fiddling with vents too keep within 200-250. I wouldn't say it's "cruising" yet but I'm learning. Last edited by Nemo; 03-30-2012 at 09:35 PM.. |
|
Thanks from:---> |
03-31-2012, 07:54 AM | #9345 |
is Blowin Smoke!
Join Date: 05-09-11
Location: Granite City, Illinois (Near St. Louis "GO CARDS")
|
Nice! Very shinney! Mine is less than a year old and the inside has this thick, black tar build up everywhere. It even drips outside around the lid. Stuff doesn't wipe off at all. Enjoy it being clean as long as you can.
__________________
22.5 WSM, 120 Gallon Offset, Weber Performer, IQ-110, ET-732 |
|
Tags |
divided circle template, uds, ugly drum, ugly drum grill, ugly drum smoker |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ugly Drum Smoker | ironslob | Q-talk | 2 | 09-19-2010 10:16 AM |
Ugly Drum Smoker - Need Help | Bartkowiakj | Q-talk | 10 | 06-18-2010 09:38 PM |
One Ugly Drum Smoker | Steve_B | Q-talk | 15 | 09-21-2009 10:32 PM |
My (not-so) Ugly Drum Smoker. | hav | Q-talk | 47 | 11-05-2008 02:30 PM |
Ceramic Cooker Meets Ugly Drum Smoker - BUDCS - Concept Drum Discussion | Hook_Line_and_Sinker | Q-talk | 9 | 04-26-2008 02:24 PM |
Thread Tools | |
|
|