|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
05-24-2010, 03:38 PM | #5986 |
Found some matches.
Join Date: 04-26-10
Location: Fishers, IN
|
Same here. I sanded it down a bit with a hand sander and a wire brush attached to a drill. I didn't get all of it. I decided, "**** it...if it ain't burning off and it ain't sanding off...it ain't cooking off." Besides, after a few cooks, it resides under a thick coating of seasoning. There are quite a few other things in my life that would kill me before some liner on my brisket.
|
|
05-24-2010, 06:13 PM | #5987 |
Full Fledged Farker
Join Date: 07-26-09
Location: Farker Rd. Los Angeles, CA
|
You could check the cost for having it sand blasted out.
__________________
Large BGE, Weber Genesis 650, WGA, Snow Creek foldable for camping, Red Thermapen |
|
05-24-2010, 07:37 PM | #5988 |
Full Fledged Farker
Join Date: 04-06-09
Location: lafayette,oregon
|
i done that and the sand blasters wanted $80 per drum. "f" that. so i took 2 days and wire wheeled it out. what a pain in the a**. good luck.
__________________
JUST A LITTLE U.D.S. webber 22.5" |
|
05-24-2010, 08:05 PM | #5989 |
Quintessential Chatty Farker
Join Date: 02-22-07
Location: Springfield, MO
|
After a massive good burn, we sand the inside with 80 grid and then 220 sandpaper, wash it out, season with oil and it's ready to go. Worked out just fine so far. Like Doc said, at some point it isn't going to do any harm and will be covered with seasoning anyway. Good luck all!
__________________
my avatar swiped fatties from the plate....look how sorry he is. ________ Meat. NB Bandera with mods Weber 22 .5" x 2, 26.75" x 1 UDS x 3 KCBS CBJ Created "The Great Spam Revelation of 2011." www.bbq-brethren.com/forum/showthread.php?t=111155 |
|
05-24-2010, 08:53 PM | #5990 | |
Babbling Farker
Join Date: 04-03-10
Location: Cypress TX
|
Quote:
__________________
J Crunch |
|
|
05-24-2010, 09:02 PM | #5991 |
Got Wood.
Join Date: 05-21-10
Location: Harpers Ferry, WV
|
I don’t have the time to read all 400 pages of post and the search turns up to many results to help, so I will just ask…
I am looking for an unlined 55G drum with lid near Harpers Ferry, WV (25425). I have found only lined so far and they are about 1.5 hr away. |
|
05-24-2010, 09:05 PM | #5992 |
Got rid of the matchlight.
Join Date: 04-16-10
Location: Sanford, Florida
|
I did exactly what you guys said to do and had a very successfull first cook. The slab of ribs, rib tips and the whole butterflied chicken all turned out FANTASTIC. I burned the barrel twice and then got inside with an air sander with 80 grit whick did an ok job. Then I took my grinder with a wire brush and knocked almost all the rest of that "red liner from Hell" out of there. Did the heavy duty detergent wash, rinse, etc. and then seasoned it with some left over peanut oil from my turkey fryer. I am thrilled with my new UDS and this website. I'm having a ball with it. Thanks again!!! Oh......i'll post pictures when I figure out how. Any help with that would be appreciated too.
|
|
05-24-2010, 10:05 PM | #5993 |
Quintessential Chatty Farker
Join Date: 02-22-07
Location: Springfield, MO
|
No disrespect Pat, but you might want to take the time to go through the thread as there are many different ideas and ways to build a UDS. "I want it and I want it now" may not serve you well. Don't get discouraged, just do some research and you will be fine. Good luck bro!
__________________
my avatar swiped fatties from the plate....look how sorry he is. ________ Meat. NB Bandera with mods Weber 22 .5" x 2, 26.75" x 1 UDS x 3 KCBS CBJ Created "The Great Spam Revelation of 2011." www.bbq-brethren.com/forum/showthread.php?t=111155 |
|
05-25-2010, 06:39 AM | #5994 |
Full Fledged Farker
Join Date: 03-16-10
Location: Hudson NH
|
The Twins
just wanted to post a few picke of my UDS's
Last edited by mgp03051; 03-01-2015 at 09:34 PM.. |
|
05-25-2010, 07:36 AM | #5995 |
Full Fledged Farker
Join Date: 02-15-10
Location: Wylie texas
Name/Nickname : Greg
|
That is a sweeeeet setup there bro
set set s |
|
05-25-2010, 07:39 AM | #5996 |
Full Fledged Farker
Join Date: 02-15-10
Location: Wylie texas
Name/Nickname : Greg
|
What the h I hate my blackberry sometimes!
|
|
05-25-2010, 07:48 AM | #5997 |
Full Fledged Farker
Join Date: 02-15-10
Location: Wylie texas
Name/Nickname : Greg
|
With that much capacity you going to do comps.
|
|
05-25-2010, 10:14 AM | #5998 |
Full Fledged Farker
Join Date: 01-15-10
Location: Oak Park, CA. Ventura County 91377
Name/Nickname : Bruce
|
more pics and details about the hinges please!
__________________
my UDS build: search "uds baby steps", uuni 3, chargriller pro |
|
05-25-2010, 12:58 PM | #5999 |
is one Smokin' Farker
Join Date: 07-08-09
Location: Columbia, Mississippi
|
Kool Smokers
__________________
Getting A smoke Ring is were it's at Yall |
|
05-25-2010, 01:04 PM | #6000 |
On the road to being a farker
Join Date: 07-17-09
Location: Saint Paul, MN
|
why are you breathing the smoke from your burnout? What's the point then?
|
|
Tags |
divided circle template, uds, ugly drum, ugly drum grill, ugly drum smoker |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ugly Drum Smoker | ironslob | Q-talk | 2 | 09-19-2010 10:16 AM |
Ugly Drum Smoker - Need Help | Bartkowiakj | Q-talk | 10 | 06-18-2010 09:38 PM |
One Ugly Drum Smoker | Steve_B | Q-talk | 15 | 09-21-2009 10:32 PM |
My (not-so) Ugly Drum Smoker. | hav | Q-talk | 47 | 11-05-2008 02:30 PM |
Ceramic Cooker Meets Ugly Drum Smoker - BUDCS - Concept Drum Discussion | Hook_Line_and_Sinker | Q-talk | 9 | 04-26-2008 02:24 PM |
Thread Tools | |
|
|