|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
06-10-2010, 10:04 PM | #6121 |
is One Chatty Farker
Join Date: 01-14-10
Location: St. Louis, MO
|
Well... here it is (sort of)... my very first UDS build. Just about as basic as it can get and - as yet anyway - completely unadorned.
First, the pieces with breakdown on cost: 55 gal new, unlined drum: FREE (got it and a twin from work) Weber Kettle Lid: FREE (found it on the side of the highway) Fire basket: Coal Grate: FREE (From an old Weber Kettle a friend gave me when he moved.) Sides: FREE (12" wire shelving recovered from a closet redo a few years ago. Ash Catcher: $2.13 (el cheapo grill from the "dollar" store) (3) 4" Stainless Steel bolts: FREE (had 'em in my tool box) (12) 1/4" Fender washers: FREE (See above) (9) Stainless Steel nuts: FREE (Love my tool box) (3) 3/4" Close Black Iron Pipe Nipples: $3.15 (2) 3/4" Pipe caps: $2.10 3/4" PVC Ball Valve: $4.27 12" stem grill Thermometer: $8.57 (3) 3" Stainless Steel Bolts (For the Cooking Grate): FREE (Uh huh... Tool box) (3) 1/4" nuts: FREE (Did I mention I have an AWESOME tool box??) Cooking Grate: FREE (aforementioned donor kettle) Total cost of build so far: $20.22 I still have a shelf I'm going to put on it that I took off my old CharGriller Offset when I put the propane burner on the side (FREE) and one more rack that I'll need to buy and then paint. All in all, I expect to pay less than $50.00 for this. Let's hope it cooks better than it costs. I'll know this weekend. We'll do a Chuckie to christen her on Saturday. Wish me luck.
__________________
Pro Q Frontier, UDS (Little Red), "Turtle Drum" UDS, CG Gasser KCBS CBJ#61160 |
|
06-10-2010, 10:19 PM | #6122 |
Full Fledged Farker
Join Date: 08-17-09
Location: Snohomish
|
Pvc?
|
|
06-10-2010, 10:21 PM | #6123 |
is one Smokin' Farker
Join Date: 07-08-09
Location: Columbia, Mississippi
|
You don't need any luck homeboy, not with a UDS
__________________
Getting A smoke Ring is were it's at Yall |
|
06-10-2010, 10:34 PM | #6124 |
Got Wood.
Join Date: 04-11-10
Location: Stoney Creek, ON
|
No luck required. It's amazing how well a UDS cooks. I'm still shocked at how little fuel this thing uses.
|
|
Thanks from:---> |
06-11-2010, 12:02 AM | #6125 |
is One Chatty Farker
Join Date: 01-14-10
Location: St. Louis, MO
|
Yeah. Well, in case you didn't guess, the theme here was "cheap". After reading a lot (not all but a lot) of the thread, I saw that several people had used PVC Ball Valves without issues. Four bucks is better than ten, so I figured if the PVC melts or warps, then I'll know better next time. But for now, we'll try it and see how it goes.
__________________
Pro Q Frontier, UDS (Little Red), "Turtle Drum" UDS, CG Gasser KCBS CBJ#61160 |
|
06-11-2010, 07:58 AM | #6126 |
Knows what a fatty is.
Join Date: 06-01-10
Location: Lebanon, Mo
|
Update.....
Got everything assembled last night excluding the Temp Gauge. I believe the drum must be bent because the Weber lid didn't fit to well. I bent the lip out, but in order to get good over all coverage of the top of the drum it seem as thought the lid needs to be almost flat and doesn't "lock" down over the drum. I'm thinking of getting a tube of hi-temp silicone caulk and put around the lid, but not sure if I should or not. And I guess I am confused on the burn...yeah I know, but I am a perfectionist and want to do it right, I bent on the Weber lid for over an hour if that tells you anything and still it doesn't sit centered. But back to the burn, I thought I could just load it with some limbs and get it hot, but should I just load the basket with charcoal and leave all the intakes open with the lid off. Any suggestions are appreciated.
__________________
And in the end, it's not the years in your life that count. It's the life in your years. |
|
06-11-2010, 10:30 AM | #6127 |
Knows what a fatty is.
Join Date: 06-01-10
Location: Lebanon, Mo
|
Also, lately I have been reading a lot about cations to certain metals you use in your smokers. Didn't know anything about this. What should I be cautious about....since I already have it built know of course.
__________________
And in the end, it's not the years in your life that count. It's the life in your years. |
|
06-11-2010, 10:48 AM | #6128 |
Full Fledged Farker
Join Date: 04-20-10
Location: Coeur d alene, Idaho
|
I welded my weber lid to the original drum lid. Then I used a jig saw to trim out the inside of the drum lid. I get the dome space and the seal of the original lid. Works great and pretty easy.
Burn that drum HOT, make her glow
__________________
Sweet Blue Que Trailer'd LownSlo 48" x 20" with a Char-Broil Grill Hinged Dome UDS, Weber Kettle lid UDS Weber Performer [COLOR=red]Red (Super Lightning Fast)Lithium-Ion powered ThermoPen[/COLOR] 2 Modded ET-73's 2 stock '73's IGrill WSBA, PNWBA, KCBS, KCBS CBJ It's the I behind the Eye that see's |
|
06-11-2010, 10:52 AM | #6129 | |
somebody shut me the fark up.
Join Date: 06-05-09
Location: Mooresville, IN
|
Quote:
It will give of toxic fumes when it get's too hot!! Use "standard" black pipe nipples, zinc bolts/nuts/washers, or stainless
__________________
[COLOR="Blue"][B]"Oh, I don’t reject Christ. I love Christ. It’s just that so many of you Christians are so unlike Christ." -Mahatma Gandhi[/B][/COLOR] |
|
|
06-11-2010, 11:00 AM | #6130 | |
Knows what a fatty is.
Join Date: 04-23-10
Location: zanesville ohio
|
Quote:
|
|
|
06-11-2010, 11:01 AM | #6131 |
Knows what a fatty is.
Join Date: 06-01-10
Location: Lebanon, Mo
|
GREAT!!!! So the expanded metal that is showed in the UDS build is toxic?
__________________
And in the end, it's not the years in your life that count. It's the life in your years. |
|
06-11-2010, 11:08 AM | #6132 |
Knows what a fatty is.
Join Date: 04-23-10
Location: zanesville ohio
|
Not all expanded metal is galv. I used half inch on mine, a bit over kill in hind site. But it should last till the end of time atleast
|
|
06-11-2010, 11:24 AM | #6133 |
Knows what a fatty is.
Join Date: 06-01-10
Location: Lebanon, Mo
|
Well, I left it out side and it rusted by the next morning.....so....it may not be then, cause Galvanized wouldn't have rusted right?
__________________
And in the end, it's not the years in your life that count. It's the life in your years. |
|
06-11-2010, 11:30 AM | #6134 |
Knows what a fatty is.
Join Date: 04-23-10
Location: zanesville ohio
|
|
|
06-11-2010, 11:33 AM | #6135 |
Knows what a fatty is.
Join Date: 06-01-10
Location: Lebanon, Mo
|
Whew!!!!! I had it leaning up against the house and it rained a little and where the water had got on it it was rusted.
The old lady would have been pissed considering I paid a welder $50.00 to weld the metal to the Weber grate.
__________________
And in the end, it's not the years in your life that count. It's the life in your years. |
|
Tags |
divided circle template, uds, ugly drum, ugly drum grill, ugly drum smoker |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ugly Drum Smoker | ironslob | Q-talk | 2 | 09-19-2010 10:16 AM |
Ugly Drum Smoker - Need Help | Bartkowiakj | Q-talk | 10 | 06-18-2010 09:38 PM |
One Ugly Drum Smoker | Steve_B | Q-talk | 15 | 09-21-2009 10:32 PM |
My (not-so) Ugly Drum Smoker. | hav | Q-talk | 47 | 11-05-2008 02:30 PM |
Ceramic Cooker Meets Ugly Drum Smoker - BUDCS - Concept Drum Discussion | Hook_Line_and_Sinker | Q-talk | 9 | 04-26-2008 02:24 PM |
Thread Tools | |
|
|