KotaChuk678
Knows what a fatty is.
OK, Got this far with it, how much more do I need to finish it? What tools do I need to best cut it out and make the appropiate bends?
-
working on DNS.. links may break temporarily.
NB Bandera baffles project
- Thread starter KotaChuk678
- Start date
- Joined
- Aug 11, 2003
- Messages
- 22,930
- Reaction score
- 16,163
- Points
- 113
- Age
- 64
- Location
- Long Island, NY
u need a good tin snips, roto tool or dremel to cut it out.
You can bend it with a couple of sections of 2x4 about 12-14 inches long, and a rubber mallot. Use them as you would use a brake. Score the bends with the rotozip wheel, a chisel or whatever. It will help get clean bends.
a drill to drill out the 2 holes.
You can bend it with a couple of sections of 2x4 about 12-14 inches long, and a rubber mallot. Use them as you would use a brake. Score the bends with the rotozip wheel, a chisel or whatever. It will help get clean bends.
a drill to drill out the 2 holes.
KotaChuk678
Knows what a fatty is.
worked out alright with the tin snips, I guess!
KotaChuk678
Knows what a fatty is.
OK, Got this far with it, how much more do I need to finish it? What tools do I need to best cut it out and make the appropriate bends?
More better!
- Joined
- Aug 11, 2003
- Messages
- 22,930
- Reaction score
- 16,163
- Points
- 113
- Age
- 64
- Location
- Long Island, NY
Not that it would matter much, But I think the tabs go inside the firebox. When I did mine, i put them in the chamber like you did and the designer corrected me.
i left it and it worked fine.
i left it and it worked fine.
worked out alright with the tin snips, I guess!
- Joined
- Aug 11, 2003
- Messages
- 22,930
- Reaction score
- 16,163
- Points
- 113
- Age
- 64
- Location
- Long Island, NY
n3ext mod should be a new firegrate and then the door gasket.
fire grate is a must! If youy only have the stock one that sits on the firebox floor, you'll get frustrated. It doesnt allow for enough airflow under the fire. You have to raise it up onto one of the rails.
fire grate is a must! If youy only have the stock one that sits on the firebox floor, you'll get frustrated. It doesnt allow for enough airflow under the fire. You have to raise it up onto one of the rails.
KotaChuk678
Knows what a fatty is.
Yeah well I wasn't sure of that but I did know that the upper lip was supposed to be tucked in between the the smoke box and firebox but I had trouble with the left side (rear of box) couldn't clear a clean path up there so I mounted the way it would fit clean:
Close counts! That oughta work just fine.
KotaChuk678
Knows what a fatty is.
Bigdog
somebody shut me the fark up.
Man, this thread takes me back a few years. Back to 2003 when we were new born and called ourselves the Bandera Brethren.:thumb:
BOT: Nice job on the mods. :clap:
BOT: Nice job on the mods. :clap:
KotaChuk678
Knows what a fatty is.
Yes I guess it took me a while to find you guys and the great idea's here. I wasn't sure of how many of these models were around and always had temp problems with mine.
I was actually looking for more or the round offset model and this one happened to turn up at the Home Depot one day and I grabbed it!
The recent Sandy hurricane up north here nearly destroyed it, not really but turned it on end and broke the wheels off and I found your site that way and have since marveled at the all the old threads on this model.
