ಚಿಕನ್
The BBQ BRETHREN FORUMS.


Forum Portal Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Brethren Banners
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, Equipment and just outdoor cookin' in general, hints, tips, tricks & techniques, success, failures... but stay on topic. And watch for that hijacking.


Reply
Thread Tools
Unread 11-26-2013, 01:02 PM   #31
Fwismoker
Quintessential Chatty Farker

 
Fwismoker's Avatar
 
Join Date: 08-22-13
Location: Fort Wayne, indiana
Downloads: 0
Uploads: 0
Default

Looks like a great design, i'd be happy to measure how high my diffuser is and grates are to compare....all i know is that it's working out perfect. When i'm off i'll take some measurements.

You want it done for Thanks Giving?
__________________
*** If you think this post is stupid, dumb, lame then don't read it. Nothing good to say? ....say Nothing.***
New Addition! Dedicated stick burning/charcoal UDS Rotisserie!,
Lou -Mini WSM uds style,
Jaime- Jumbo mini or Jimmy
Black bullet -newly renovated Big Poppa Black powder coated UDS,
Jaime build- http://www.bbq-brethren.com/forum/sh...d.php?t=173767
Fwismoker is offline   Reply With Quote


Unread 11-26-2013, 01:05 PM   #32
bbqgeekess
Babbling Farker

 
Join Date: 07-06-13
Location: Oklahoma
Downloads: 0
Uploads: 0
Default

Quote:
Originally Posted by Fwismoker View Post
Looks like a great design, i'd be happy to measure how high my diffuser is and grates are to compare....all i know is that it's working out perfect. When i'm off i'll take some measurements.

You want it done for Thanks Giving?
That'd be great if you could measure your's for me--I'd really appreciate it. I guess having it done by Thanksgiving would be nice, but not totally necessary. I can do smoke a turkey on the Weber Kettle or Hasty Bake for now.
__________________
18.5" WSM, Hasty-Bake Suburban, OTG 22.5", "Antonio" Bandera, Mini WSM
bbqgeekess is offline   Reply With Quote


Unread 11-26-2013, 01:08 PM   #33
bbqgeekess
Babbling Farker

 
Join Date: 07-06-13
Location: Oklahoma
Downloads: 0
Uploads: 0
Default

I can buy 18.5" charcoal grates for my UDS from Amazon for like $10 a piece--Which I could use for cooking grates and perhaps charcoal grate too.

What if I used one of these 18.5" charcoal grates having it sit 2" from bottom of barrel, and then just sit a footless charcoal basket on it? I could then easily just sit it up higher at another level for grilling.
__________________
18.5" WSM, Hasty-Bake Suburban, OTG 22.5", "Antonio" Bandera, Mini WSM
bbqgeekess is offline   Reply With Quote


Unread 11-26-2013, 02:43 PM   #34
bbqgeekess
Babbling Farker

 
Join Date: 07-06-13
Location: Oklahoma
Downloads: 0
Uploads: 0
Default

I went ahead and screwed one of my hand folded aluminum flashing sliding vents on--slides really smooth and tight:



Now I need to decide if I want to drill one big 1 1/8" hole through the slider vent/drum or a bunch of smaller holes in a grid.

Btw, that's a pencil line down along the side of the drum through the middle of the slider vent rectangle, not a seam :)
__________________
18.5" WSM, Hasty-Bake Suburban, OTG 22.5", "Antonio" Bandera, Mini WSM
bbqgeekess is offline   Reply With Quote


Unread 11-26-2013, 03:52 PM   #35
bbqgeekess
Babbling Farker

 
Join Date: 07-06-13
Location: Oklahoma
Downloads: 0
Uploads: 0
Default

I went ahead and drilled out a hole with stepped drill bit--with a little olive oil rubbed all over it, thanks for the tip. It's at 7/8 now and I'll probably make it 1 1/8" later on. But for now I'll just start with 7/8 holes. I need to add one more slider vent towards the front, and then a capped nipple in the rear.

__________________
18.5" WSM, Hasty-Bake Suburban, OTG 22.5", "Antonio" Bandera, Mini WSM
bbqgeekess is offline   Reply With Quote


Unread 11-26-2013, 04:19 PM   #36
Carbon
is One Chatty Farker
 
Join Date: 08-24-08
Location: Los Angeles
Downloads: 0
Uploads: 0
Default

Nice work on the vent!

I installed a single, longer sliding vent and drilled 4 one-inch holes across for my 55 gal UDS.
__________________
....UDS....Mini-WSM....Midi-WSM....Mod-ECB....22.5-OTG....34"wood fired pizza oven....
Carbon is offline   Reply With Quote


Unread 11-26-2013, 04:35 PM   #37
HeSmellsLikeSmoke
somebody shut me the fark up.
 
HeSmellsLikeSmoke's Avatar
 
Join Date: 04-02-07
Location: Warren, Vermont
Downloads: 0
Uploads: 0
Default

One large rectangular hole will allow you to use it for an ash clean out port should that ever become useful. This is how the BGE one is designed.
__________________
Jim - Another transplanted Texan
Former KCBS CBJ

Large and Medium Big Green Eggs , Black 18.5" WSM, Blue Weber Performer - Stainless, Green Weber OTG Kettle , Brinkmann SnP Pro, and a Stainless UDS. One retired Portable Kitchen grill.

Red Thermapen, Maverick ET-732, EdgePro Apex Sharpener.

Avatar is the original 1951 Weber Kettle
HeSmellsLikeSmoke is offline   Reply With Quote


Unread 11-26-2013, 04:46 PM   #38
bbqgeekess
Babbling Farker

 
Join Date: 07-06-13
Location: Oklahoma
Downloads: 0
Uploads: 0
Default

Quote:
Originally Posted by HeSmellsLikeSmoke View Post
One large rectangular hole will allow you to use it for an ash clean out port should that ever become useful. This is how the BGE one is designed.
Fortunately the 30 gallon UDS is light enough to lift up and pour out the ash into my galvanized ash can.
__________________
18.5" WSM, Hasty-Bake Suburban, OTG 22.5", "Antonio" Bandera, Mini WSM
bbqgeekess is offline   Reply With Quote


Unread 11-26-2013, 05:46 PM   #39
Fwismoker
Quintessential Chatty Farker

 
Fwismoker's Avatar
 
Join Date: 08-22-13
Location: Fort Wayne, indiana
Downloads: 0
Uploads: 0
Default

Quote:
Originally Posted by bbqgeekess View Post
That'd be great if you could measure your's for me--I'd really appreciate it. I guess having it done by Thanksgiving would be nice, but not totally necessary. I can do smoke a turkey on the Weber Kettle or Hasty Bake for now.
Your design is really close to what i did... I have the diffuser about 6" above the basket. The top grate is 1.5" down from the top and the send is 7" from the top.
__________________
*** If you think this post is stupid, dumb, lame then don't read it. Nothing good to say? ....say Nothing.***
New Addition! Dedicated stick burning/charcoal UDS Rotisserie!,
Lou -Mini WSM uds style,
Jaime- Jumbo mini or Jimmy
Black bullet -newly renovated Big Poppa Black powder coated UDS,
Jaime build- http://www.bbq-brethren.com/forum/sh...d.php?t=173767
Fwismoker is offline   Reply With Quote


Unread 11-26-2013, 05:58 PM   #40
bbqgeekess
Babbling Farker

 
Join Date: 07-06-13
Location: Oklahoma
Downloads: 0
Uploads: 0
Default

Quote:
Originally Posted by Fwismoker View Post
Your design is really close to what i did... I have the diffuser about 6" above the basket. The top grate is 1.5" down from the top and the send is 7" from the top.
Thanks I might bring up the diffuser grate to 6" above basket instead of 4", like you did.

So 1.5" down from the top for the first grate instead of 2" .. Hrm.. that'd probably be better since the 30 gallon drum is shorter than the 55.
__________________
18.5" WSM, Hasty-Bake Suburban, OTG 22.5", "Antonio" Bandera, Mini WSM
bbqgeekess is offline   Reply With Quote


Unread 11-26-2013, 05:59 PM   #41
bbqgeekess
Babbling Farker

 
Join Date: 07-06-13
Location: Oklahoma
Downloads: 0
Uploads: 0
Default

I just measured the diameter of the charcoal grate for the weber 22.5 kettle and it is at 17".

What is the diameter of the jumbo joe / weber 18.5 cooking grate? is it 17" as well or larger?
__________________
18.5" WSM, Hasty-Bake Suburban, OTG 22.5", "Antonio" Bandera, Mini WSM
bbqgeekess is offline   Reply With Quote


Unread 11-26-2013, 06:19 PM   #42
Fwismoker
Quintessential Chatty Farker

 
Fwismoker's Avatar
 
Join Date: 08-22-13
Location: Fort Wayne, indiana
Downloads: 0
Uploads: 0
Default

Quote:
Originally Posted by bbqgeekess View Post
I just measured the diameter of the charcoal grate for the weber 22.5 kettle and it is at 17".

What is the diameter of the jumbo joe / weber 18.5 cooking grate? is it 17" as well or larger?
I believe it's 17.5"
__________________
*** If you think this post is stupid, dumb, lame then don't read it. Nothing good to say? ....say Nothing.***
New Addition! Dedicated stick burning/charcoal UDS Rotisserie!,
Lou -Mini WSM uds style,
Jaime- Jumbo mini or Jimmy
Black bullet -newly renovated Big Poppa Black powder coated UDS,
Jaime build- http://www.bbq-brethren.com/forum/sh...d.php?t=173767
Fwismoker is offline   Reply With Quote


Unread 11-26-2013, 07:57 PM   #43
bbqgeekess
Babbling Farker

 
Join Date: 07-06-13
Location: Oklahoma
Downloads: 0
Uploads: 0
Default

So I finished installing the other sliding vent and adding the rear hole for nipple/cap. Now I just need to remove the two vents temporarily (unscrew them) and burn out this drum (I am assuming I can use some old non treated cedar/pine fencing?)



__________________
18.5" WSM, Hasty-Bake Suburban, OTG 22.5", "Antonio" Bandera, Mini WSM
bbqgeekess is offline   Reply With Quote


Unread 11-26-2013, 08:11 PM   #44
c farmer
Babbling Farker

 
c farmer's Avatar
 
Join Date: 06-13-13
Location: pa
Downloads: 0
Uploads: 0
Default

Yup. I used pallet wood which is mostly pine.
__________________
Adam

Gold mini wsm 1st gen mes, amazin dust and pellet smoker, and the uds.
c farmer is offline   Reply With Quote


Unread 11-26-2013, 10:19 PM   #45
SmittyJonz
Quintessential Chatty Farker
 
SmittyJonz's Avatar
 
Join Date: 07-17-13
Location: Burleson Tx
Downloads: 0
Uploads: 0
Default

I'd probally just scrub it with soap n water and scrub brush on a stick since it's unlined and only has rust inhibitor on it then finish building it and move on to "Seasoning" It.
__________________
FARKING North Texas BASH - Oct 18 Lake Ray Roberts - Be There!
SmittyJonz is offline   Reply With Quote


Thanks from:--->
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Loading



All times are GMT -5. The time now is 05:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.