MMMM.. BRISKET..
The BBQ BRETHREN FORUMS.  



Our Homepage Donation to Forum Overhead Welocme Merchandise Associations Purchase Subscription Amazon Affiliate
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking.


Reply
 
Thread Tools
Old 09-23-2013, 05:30 PM   #1
brother steve
Got Wood.
 
brother steve's Avatar
 
Join Date: 05-24-11
Location: lewistown pa.
Default Building a uds

Getting started on a uds and was wanting to know if the red paint inside the drum needs cleaned out?I will burn it first with wood to clean it but does all the red stuff need to go?
brother steve is offline   Reply With Quote




Old 09-23-2013, 05:34 PM   #2
c farmer
Babbling Farker
 
Join Date: 06-13-13
Location: pa
Default

Yup the red liner needs to go.

Burn it out then wire brush it out.

Or sandblast it.
__________________
Adam

Gold mini wsm 1st gen mes, amazin dust and pellet smoker, and the uds.

Double O' Seven == Rotisserie/Grill/Smoker Hybrid and offset.
c farmer is offline   Reply With Quote


Old 09-23-2013, 05:38 PM   #3
IamMadMan
somebody shut me the fark up.

 
IamMadMan's Avatar
 
Join Date: 07-30-11
Location: Pemberton, New Jersey
Default

Quote:
Originally Posted by c farmer View Post
Yup the red liner needs to go.

Burn it out then wire brush it out.

Or sandblast it.
You'll have a good workout removing it..
IamMadMan is offline   Reply With Quote


Old 09-23-2013, 05:39 PM   #4
martyleach
Quintessential Chatty Farker

 
Join Date: 12-17-10
Location: Pleasanton, Ca
Default

It is a real pain. Trust me, I've done at least 6 of them... but have fun.
__________________
XL BGE, Kamado Joe Jr, Santa Maria pit, 26" Weber custom performer, MAK One Star pellet cooker, 14.5" WSM, Jumbo Joe, WGA, Arte Flame griddle insert for the 26" Weber.

Custom wooden handles for BBQ's made by Marty Leach (oh, that's me)
[url]http://www.amlwoodart.com[/url]
martyleach is offline   Reply With Quote


Old 09-23-2013, 06:31 PM   #5
Wneill20
is one Smokin' Farker
 
Join Date: 07-08-12
Location: Murrieta ca
Default

Fine someone to sand blast it. I did cost me $45. For the inside and out no burning required
__________________
Smoke This BBQ Team,Jambo Jr,2 BP UDS'S,2 Pellet Smokers
Wneill20 is offline   Reply With Quote


Old 09-23-2013, 07:09 PM   #6
J-Rod
is One Chatty Farker
 
J-Rod's Avatar
 
Join Date: 08-15-12
Location: Irish Hills, MI
Default

Quote:
Originally Posted by Wneill20 View Post
Fine someone to sand blast it. I did cost me $45. For the inside and out no burning required
^^^DO THIS.

Burning it out will barely touch the chit, and even using stripper takes tons of extra elbow grease to get it all out. I spent the better half of a day laying in my drum with a wire wheel on my grinder getting the last of that chit out-mind you this was after a hot burnout and a stripper treatment too- it farking SUCKED.

I'd gladly pay $50 to get it media blasted if I could do things over.
If only I had a DeLorean...
__________________
Okie Joe offset, UDS, Akorn, Weber Kettles, I'm JD.
J-Rod is offline   Reply With Quote


Old 09-23-2013, 07:22 PM   #7
HookedOnQ
is one Smokin' Farker
 
HookedOnQ's Avatar
 
Join Date: 12-31-12
Location: chesterfield, va
Default

It needs to be removed and trust me and the others that have said the same. ITS A PITA TO GET OUT! Id suggests finding someone to sandblast it. If you cant than burn it a few times and get it real hot than get to work with a wire cup brush or flap discs on a grinder or drill. If your using the flat lid dont burn that as it will warp it.
__________________
BLUE WEBER 22.5 OTG,(OBUDS) OVERBUILT U.D.S, MAVERICK ET732, 38"x38"x7' SMOKE HOUSE.
HookedOnQ is offline   Reply With Quote


Old 09-23-2013, 07:29 PM   #8
HeSmellsLikeSmoke
somebody shut me the fark up.
 
HeSmellsLikeSmoke's Avatar
 
Join Date: 04-02-07
Location: Warren, Vermont
Default

Dang near worth finding an unlined drum even now.
__________________
Jim - Another transplanted Texan
Former KCBS CBJ

Large and Medium Big Green Eggs , Black 18.5" WSM, Blue Weber Performer - Stainless, Green Weber OTG Kettle , Brinkmann SnP Pro, and a Stainless UDS. One retired Portable Kitchen grill.

Red Thermapen, Maverick ET-732, EdgePro Apex Sharpener.

Avatar is the original 1951 Weber Kettle
HeSmellsLikeSmoke is offline   Reply With Quote


Old 09-23-2013, 08:07 PM   #9
Fwismoker
somebody shut me the fark up.

 
Join Date: 08-22-13
Location: Fort Wayne, Indiana
Default

The rust inhibitor lining is a piece of cake...do you have pics?
__________________
Change the way you rotisserie for the BETTER![COLOR="Red"][B]Cajun Bandit Kits for your WSM or Weber Kettle Now Available![/B][/COLOR]



Visit [COLOR="Red"]OctoForks[/COLOR] in Sales & Ventures

Website & Blog: [url]www.octoforks.com[/url]
Fwismoker is offline   Reply With Quote


Old 09-23-2013, 08:15 PM   #10
brother steve
Got Wood.
 
brother steve's Avatar
 
Join Date: 05-24-11
Location: lewistown pa.
Default

no pics yet. i will check what it is and what was in it.
brother steve is offline   Reply With Quote


Old 09-23-2013, 09:22 PM   #11
wladrules
Full Fledged Farker
 
wladrules's Avatar
 
Join Date: 10-14-11
Location: Bryant, AR
Default

Quote:
Originally Posted by J-Rod View Post
^^^DO THIS.

Burning it out will barely touch the chit, and even using stripper takes tons of extra elbow grease to get it all out. I spent the better half of a day laying in my drum with a wire wheel on my grinder getting the last of that chit out-mind you this was after a hot burnout and a stripper treatment too- it farking SUCKED.

I'd gladly pay $50 to get it media blasted if I could do things over.
If only I had a DeLorean...
Yep. That ^^. Drop the change and you'll not have to suffer like I did!
__________________
UDS, COS
wladrules is offline   Reply With Quote


Old 09-23-2013, 09:42 PM   #12
jeffturnerjr
is One Chatty Farker
 
jeffturnerjr's Avatar
 
Join Date: 08-20-13
Location: Odessa, TX
Default

Never thought of getting sand blasted.... Brilliant.
__________________
Husband, Father & Pastor. Offset Cooker made by Muscrat, Weber Kettle, El Cheapo Brinkman
jeffturnerjr is offline   Reply With Quote


Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Forum Custom Search: Enter your Search text below. GOOGLE will search ONLY the BBQ Brethren Forum.
Custom search MAY not work(no display box) in some configurations of Internet Explorer. Please use compliant version of Firefox or Chrome.







All times are GMT -5. The time now is 06:50 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.
no new posts