SteelSmokin
Full Fledged Farker
Any recommendations on any brand y'all felt were better than others and where do I find them? Thanks for the help.
see Todds recommendation in this thread http://www.bbq-brethren.com/forum/showthread.php?t=131343&highlight=todd+injector&page=2
I have both, and use the spitjack if the one in the link gets clogged. This link goes direct to ValleyVet http://www.valleyvet.com/ct_detail.html?pgguid=2b95d444-565c-4ef8-84c8-edd8320ec6fe
you can just put the tube in the injection, squeeze once or twice to prime it, and then pump all you need without refilling. EZPZ!!
I have one of these and it worked the first time I used it and hasn't worked since. I was using a clear injection with no chunks. I've taken apart every thing i can take apart and soaked and cleaned and it still won't draw. I went back to my old manual Cajun injector.
I have one of these and it worked the first time I used it and hasn't worked since. I was using a clear injection with no chunks. I've taken apart every thing i can take apart and soaked and cleaned and it still won't draw. I went back to my old manual Cajun injector.
I had the same thing happen once or twice Ron. I was able to get it working again by submerging in in HOT (just below boiling) water for a bit, then adding a little cold so I could get my hand in without scalding and giving it a squeeze or two.
It's made to innoculate multiple animals, so pretty sturdy. If I strain my injection through a clean handkerchief (works better than cheesecloth, and washable) I don't have the issue anymore
So the amount of time I save over a manual injector will be spent soaking and straining? :becky:
Spitjack, the gold standard
I have one of these for home use:
https://www.bigpoppasmokers.com/store/bbq-accessories/cajun-injector-deluxe-injector