עָטִין
The BBQ BRETHREN FORUMS.


Forum Portal Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Brethren Banners
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, Equipment and just outdoor cookin' in general, hints, tips, tricks & techniques, success, failures... but stay on topic. And watch for that hijacking.


Reply
Thread Tools
Unread 04-14-2013, 07:27 PM   #1
cousinconley
On the road to being a farker
 
cousinconley's Avatar
 
Join Date: 09-13-11
Location: Broken Arrow, OK
Downloads: 0
Uploads: 0
Default Cook N Kettle Sr and my struggle with lean hamburger patties

Here are a few pics using the new cast iron grill grate. Fit perfectly in the Cook N Kettle Sr. Its nearly identical to the Weber 18.5". I feel more at home smoking than grilling. So my grilling techniques do need improvement.

For this cook I put all he coals on one side of the cooking area. I am still struggling cooking lean hamburger. I always manage to get a blood pocket in them. This time around I seared both sides of the burgers for 5 minutes each then put them in the side opposite the coals to finish while I continued to grill on the hot side. I guess I left them in too long...they became charred on one side and flavorless. I will continue my attempts.

Anyway here are the pics. Here is the new cast iron grate.






Startign up the lump.





Started off grilling skirt steaks. I would sear two minutes per side then put a batch opposite the coals before laying another batch down. I also would put the lid on so the cooler side would still continue to cook.



I foiled the skirt steaks then laid down some sirloins. I did 5 minutes per side and put them on the cooler side of the grill while I put down hamburger patties.





Here I started putting the burgers opposite the coals while I grilled kabasas and hotdogs.





There it is.
__________________
Vertical Home-Built Smoker, Cook N Kettle SR 59, Alaska Ulu Knife
cousinconley is offline   Reply With Quote


Thanks from:--->
Unread 04-14-2013, 07:40 PM   #2
1911Ron
is One Chatty Farker

 
1911Ron's Avatar
 
Join Date: 04-09-12
Location: Ft. Mudge, Az
Downloads: 0
Uploads: 0
Default

I like the looks of that cooker!
__________________
Old Rifles, Cast Iron and other things i spend my money on!
1911Ron is offline   Reply With Quote


Unread 04-14-2013, 07:49 PM   #3
maxwell7
Full Fledged Farker

 
maxwell7's Avatar
 
Join Date: 07-07-09
Location: Centerview , M0.
Downloads: 0
Uploads: 0
Default

Hey there cousinconely--did you get your cast iron grill from the current cook n kettle co. , or elsewhere? I own my Dad's that date from the 50's , and everything inside has burnt out, and needs repacing. The bottom damper has fused to the kettle , and i'm afraid to try to pop it loose for fear of cracking my old kettle. Do you , or anyone have ideas on how to get it loose?
maxwell7 is offline   Reply With Quote


Unread 04-14-2013, 08:51 PM   #4
cousinconley
On the road to being a farker
 
cousinconley's Avatar
 
Join Date: 09-13-11
Location: Broken Arrow, OK
Downloads: 0
Uploads: 0
Default

Quote:
Originally Posted by maxwell7 View Post
Hey there cousinconely--did you get your cast iron grill from the current cook n kettle co. , or elsewhere? I own my Dad's that date from the 50's , and everything inside has burnt out, and needs repacing. The bottom damper has fused to the kettle , and i'm afraid to try to pop it loose for fear of cracking my old kettle. Do you , or anyone have ideas on how to get it loose?
I got mine off Craigslist and did the restore myself. The gentleman I bought it off of has had it since 1961. Here is the link to the thread: http://www.bbq-brethren.com/forum/sh...d.php?t=133906

To get the bottom damper off, see if you can somehow submerge the bottom of the kettle in distilled vinegar or soak some old cloth in vinegar and lay it on the area around the damper. Warning...it will smell aweful but it eats away at the rust. I would only do this for a day at a time and check the results. It will begin to eat away at the metal if you leave it there a few days.

Alternatively, you could grind it off with an angle grinder, if feasible, and purchase a new damper from the new company.
__________________
Vertical Home-Built Smoker, Cook N Kettle SR 59, Alaska Ulu Knife
cousinconley is offline   Reply With Quote


Thanks from:--->
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Loading



All times are GMT -5. The time now is 09:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.