oink
The BBQ BRETHREN FORUMS.  


Our Homepage Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Brethren Banners(temp offline)
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, Equipment and just outdoor cookin' in general, hints, tips, tricks & techniques, success, failures... but stay on topic. And watch for that hijacking.


Reply
 
Thread Tools
Old 02-11-2013, 12:50 PM   #1
HogFan
is one Smokin' Farker
 
Join Date: 03-21-12
Location: Arkansas
Default Feedback on Smoker Design

Seen this smoker for sale and thought the design was interesting. It was built in a technical college welding shop. Made from 30" diameter propane tanks. Appears trailer was also built in the same shop. Not sure where axle cam from but it has 15" wheels. Smoker is one year old. Owner has successfully used both stick and charcoal in firebox.

Fire is built in bottom of the vertical tank and it has an ash cleanout. Seller says there is an air outlet adjustment on top of the vertical tank. Currently only one rack in vertical tank but it has hangers at top for hanging meat. Rack supports could easily be added.

Only one grate level in horizontal tank. Seems the opening would need to be enlarged down lower to utilize two grate levels. Adjustable air exit on top of exhaust stack. Support between front of horizontal tank and trailer looks weak but owner says it made from 3" C-channel and 1 1/2" angle iron. Cooking surface in horizontal surface appears high but enlarging the opening might help this.

What are your thoughts about the pros and cons of this smoker? I thank you for your feedback!

HogFan is offline   Reply With Quote


Old 02-11-2013, 01:03 PM   #2
Bludawg
somebody shut me the fark up.
 
Bludawg's Avatar
 
Join Date: 07-04-09
Location: Jonesboro,Tx
Default

I'd say its worth 500, I like the design.
__________________
I'm a Proxy Vegetarian> Cows eat grass & I eat cows.
Bludawg is online now   Reply With Quote


Old 02-11-2013, 01:31 PM   #3
Redheart
is one Smokin' Farker
 
Redheart's Avatar
 
Join Date: 07-03-09
Location: Omaha, NE
Default

Does the horizontal chamber have a grease tap?
__________________
"Red" - Just Moved to Omaha!
Redheart is offline   Reply With Quote


Old 02-11-2013, 01:33 PM   #4
Motley Q
On the road to being a farker
 
Join Date: 08-18-12
Location: marietta Ga
Default

Not taken care of

How does something just a year old get so rusty.

It has car tires on it. And they are probably over 6 yrs old

Trailer tires are made for a reason.

Be careful

Last edited by Motley Q; 02-11-2013 at 01:53 PM..
Motley Q is offline   Reply With Quote


Old 02-11-2013, 02:32 PM   #5
HogFan
is one Smokin' Farker
 
Join Date: 03-21-12
Location: Arkansas
Default

Q: How does something just a year old get so rusty?
A: I assume because it has never been painted.

Q: It has car tires on it. And they are probably over 6 yrs old
A: I agree the tires are in bad shape. He offered 2 replacement tires.

Q: Trailer tires are made for a reason.
A: I'm not aware that trailer tires function better. I thought they were cheaper made than car/truck tires due to loading the side wall less. Could you give more detail?
HogFan is offline   Reply With Quote


Old 02-11-2013, 07:11 PM   #6
HogFan
is one Smokin' Farker
 
Join Date: 03-21-12
Location: Arkansas
Default

I'll have to check if there is a grease tap in the horizontal tank.
__________________
OK Joe Vertical Smoker, UDS, Komado Acorn, Weber Kettle Ranch, Weber Kettle, Stok Kettle
HogFan is offline   Reply With Quote


Old 02-11-2013, 07:36 PM   #7
Neonnblack
Full Fledged Farker
 
Join Date: 01-15-13
Location: Reno, NV
Default

essentially, trailer tires or ST tires have very stiff sidewalls and higher PSI requirments to help reduce sway. LT or light truck tires can do the same in most cases.
Neonnblack is offline   Reply With Quote


Old 02-11-2013, 07:51 PM   #8
Mo-Dave
Babbling Farker
 
Mo-Dave's Avatar
 
Join Date: 09-18-06
Location: Hurricane Deck Missouri
Default

Interesting design. I would guess it has never been painted after it was built. Without seeing it in person, it looks like the fire box on the vertical is a little to close to the ground and could drag. Again can't really tell but both tanks seem a bit high to work out of comfortably and the last thing that concerns me is how low the exhaust is in relation to the horizontal tank. Does it have running lights and if so do they work? These, and what others have pointed out are points to bring to the table, along with all the work it will take to get it up and running, then offer him 350.00 to 375.00. Remember there will be good deals down the road if you can wait it out, he has his reasons for selling it, ask him why. Is there a title?
Dave
__________________
MY DEFINITION OF AN OPINION.
I can only give credence in facts I believe factual. If those facts are wrong, and are proven as such by facts, I must only give those facts credence, if I believe them as factual.

When the going gets tough, I take more fiber.

Last edited by Mo-Dave; 02-11-2013 at 09:54 PM..
Mo-Dave is online now   Reply With Quote


Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Forum Custom Search: Enter your Search text below. GOOGLE will search ONLY the BBQ Brethren Forum.





All times are GMT -5. The time now is 09:35 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.
no new posts