What do you guys like RUGU DIGIQ - Page 2

scm1226 · 09-08-2012, 05:48 AM

Send me a test kit and I will look into being a partner. That is the way you need to get a partner. Tests need to be done with someone in the states.

woodpelletsmoker · 09-08-2012, 08:02 AM

Quote:

Originally Posted by scm1226

Send me a test kit and I will look into being a partner. That is the way you need to get a partner. Tests need to be done with someone in the states.

Nearly no more feedback!
Less voice than the buyers.
Whom shall I trust.

woodpelletsmoker · 09-08-2012, 08:05 AM

As I said I need a partner financially strong.
If one can not afford to a US$158 kit, he must not be a candidate

Teamfour · 09-08-2012, 08:30 AM

Quote:

Originally Posted by woodpelletsmoker

As I said I need a partner financially strong.
If one can not afford to a US$158 kit, he must not be a candidate

Conversely, if you are not willing to sacrifice one unit to someone who wants to test it and perhaps become a distributor, then I would say you are not serious about expanding your company.

As someone who owns a race team, we get free products to test all the time in order to provide the mfr feedback, promote the product if it is good, and perhaps even sell the product at events.

I am not saying that you should give controllers to anyone that says they want to be a distributor. However you could ask questions of those people to determine if they are serious. Such as their marketing background, previous sales history, etc.

Folks here are really trying to help you be successful.

woodpelletsmoker · 09-08-2012, 08:55 AM

Quote:

Originally Posted by Teamfour

Conversely, if you are not willing to sacrifice one unit to someone who wants to test it and perhaps become a distributor, then I would say you are not serious about expanding your company.

As someone who owns a race team, we get free products to test all the time in order to provide the mfr feedback, promote the product if it is good, and perhaps even sell the product at events.

I am not saying that you should give controllers to anyone that says they want to be a distributor. However you could ask questions of those people to determine if they are serious. Such as their marketing background, previous sales history, etc.

Folks here are really trying to help you be successful.

As I said I did give away a few sets FREE.
But none really gave me feedback.
It is too hard for me to find whom I shall trust

IbrahimSS · 09-08-2012, 10:09 AM

Quote:

Originally Posted by woodpelletsmoker

As I said I did give away a few sets FREE.
But none really gave me feedback.
It is too hard for me to find whom I shall trust

You should be able to find people you trust by asking for qualifications. For example, before sending any new free products to anyone, make sure that person has the funds necessary to make the wholesale bulk purchase. You might also ask for someone to show they have experience as a distributor, etc. The list goes on.

pixcolor · 09-10-2012, 05:06 PM

Quote:

Originally Posted by woodpelletsmoker

As I said I did give away a few sets FREE.
But none really gave me feedback.
It is too hard for me to find whom I shall trust

Perhaps you could talk to the folks at vision grills
http://www.visiongrills.com/
They seem to be growing their company steadily. They are bringing in ceramic grills from China at a good price point and are getting a good reputation for their customer service. They have very few accessories for their grills, and maybe they would like to add you controller to their accessories.

Squeal Appeal · 09-18-2012, 07:49 AM

Wang the electronics that are being sold buy others are almost perfect in appearance and quality, as far as differance in operations,that is where your product is superior....If you can clean up your wires, the way the ends are fastened and don't use single wires . also ( Red wire for + Black for -) ... NEW Controller (not something with scratches an marks) The fan wiring needs to be secured to the fan, not just by being soldered, but secured with a bracket, Stay with the metal housing fan, not plastic, and come up with a light weight box encloser, Remember these aren't just installed and forgotten,,, the will be removed and installed alot, need to be more durable.........Main point ..If they are to be sold as new they need to Look Like New...A clean web site not all jumbled with all your products on 1 page, each item should have its on page for its information, setting, faqs,trouble shooting,etc...You also need a great customer service dept....
Instead of finding an investor, hire someone to be a rep. let them do what you need done,,Ship them your product, and let them take care of most of the problems...
Just my 2 cents

Squeal Appeal · 09-18-2012, 08:13 AM

Your shipping time is killing you !!!!!! You need a distributor or Rep. of your product here in the USA....but you need to perfect your products first...

Back-up, refine, perfect. I think you should have spent more time with your products before offering them for sale, Needed better developement, and research.....In doing that, your products would be in better demand ....

WineMaster · 09-18-2012, 09:33 AM

Its made in the U.S.A.

Toronto · 09-19-2012, 09:04 PM

At the risk of sounding too blunt:

1. Your end product is ugly. I would suggest picking new housing that is more appealing to the US customer and picking finishes that hide wires.

2. Your ebay listings are cluttered and confusing. It took me 20 minutes before I figured out the differences between the packages and im still not sure I understand them 100%.

3. DigiQ has been around for a long time and have earned the trust of the BBQ community. Although they are expensive everyone knows they work and work well. It has won many competitions for people.

What does make your products attractive is the price point and technical capabilities. At this price point your target market would be the average backyard BBQ'er and because of this I would suggest making your models very simplified+rugged. People in the US tend to value 'easy to use' and shiny things with bright colors, looks matter a lot.

The hesitation lies in the fact that not many people have used your product yet so there is risk in buying something that has no history.

The most common smokers that people will use with your product:

Weber Kettle (OTS, OTG)
Weber Smokey Mountain (Bullet, Weber SMS)
Big Green Egg (BGE)
Komado type
Ugly Drum Smokers (UDS)
Offset box smokers

One last note, I dont understand why a BBQ controller company hasnt made this yet but would you consider making a model that is rainproof? Being the only company that makes one may give you a competitive advantage.

Sorry if my comments were too harsh I was trying to give an honest opinion and not offend you.

woodpelletsmoker · 09-22-2012, 03:26 AM

I am doing NEW hosing of WOLF and TIGER. I am expecting ready in 4 weeks
I am also think to place controller, fan inside a rainproof SS box.
a 3" feet long stainless corregated pipe conencts pit and the SS box.
There are two tye of SS box.
SS Box #1, smaller, just or fan and controller.
SS Box #2, bigger, holding fan, controller and Li-Ion battery

woodpelletsmoker · 09-22-2012, 04:59 AM

I have SS box with different sizes of flange, which can be used directky on Big Green,Kamodo, Offset.
fan, controller, battery are placed inside the SS box.
It looks neat from outside

Toronto · 09-22-2012, 08:02 AM

Quote:

Originally Posted by woodpelletsmoker

I am doing NEW hosing of WOLF and TIGER. I am expecting ready in 4 weeks
I am also think to place controller, fan inside a rainproof SS box.
a 3" feet long stainless corregated pipe conencts pit and the SS box.
There are two tye of SS box.
SS Box #1, smaller, just or fan and controller.
SS Box #2, bigger, holding fan, controller and Li-Ion battery

Quote:

Originally Posted by woodpelletsmoker

I have SS box with different sizes of flange, which can be used directky on Big Green,Kamodo, Offset.
fan, controller, battery are placed inside the SS box.
It looks neat from outside

Although SS boxes are nice one downfall is that you cannot see through them to check on your controller. Here is a youtube video of someone making a rainproof box for the iQue, although it protects from rain it is very ugly looking.

Build This BBQ Electronics Rain Box For Your Thermometer, iQue, Guru, Stoker! - YouTube

Do you have prototype pictures of the new housing?

Maybe you can do a voting poll here to see which one looks best to the forum members?

woodpelletsmoker · 09-22-2012, 08:15 PM

Thanks! Youtube is blocked by China government.
Can you send me a picture.

09-08-2012, 05:48 AM	#16
scm1226 Full Fledged Farker Join Date: 05-14-10 Location: Bay Shore, NY Downloads: 0 Uploads: 0	Send me a test kit and I will look into being a partner. That is the way you need to get a partner. Tests need to be done with someone in the states. __________________ SMOKIN' IRISH BBQ

09-18-2012, 09:33 AM	#25
WineMaster Babbling Farker Join Date: 01-16-07 Location: Southern MN Downloads: 0 Uploads: 0	Its made in the U.S.A. __________________ Dan MJH From Backyard Bomber BBQ ---- X 2 Junior & Stretch 22.5 Weber Kettle Blue Thermopen Comp Team Wine & Swine This is funner than chuckin rocks at a sign. John Godwin (Duck Dynasty)

09-19-2012, 09:04 PM	#26
Toronto Full Fledged Farker Join Date: 09-12-12 Location: Toronto Downloads: 0 Uploads: 0	At the risk of sounding too blunt: 1. Your end product is ugly. I would suggest picking new housing that is more appealing to the US customer and picking finishes that hide wires. 2. Your ebay listings are cluttered and confusing. It took me 20 minutes before I figured out the differences between the packages and im still not sure I understand them 100%. 3. DigiQ has been around for a long time and have earned the trust of the BBQ community. Although they are expensive everyone knows they work and work well. It has won many competitions for people. What does make your products attractive is the price point and technical capabilities. At this price point your target market would be the average backyard BBQ'er and because of this I would suggest making your models very simplified+rugged. People in the US tend to value 'easy to use' and shiny things with bright colors, looks matter a lot. The hesitation lies in the fact that not many people have used your product yet so there is risk in buying something that has no history. The most common smokers that people will use with your product: Weber Kettle (OTS, OTG) Weber Smokey Mountain (Bullet, Weber SMS) Big Green Egg (BGE) Komado type Ugly Drum Smokers (UDS) Offset box smokers One last note, I dont understand why a BBQ controller company hasnt made this yet but would you consider making a model that is rainproof? Being the only company that makes one may give you a competitive advantage. Sorry if my comments were too harsh I was trying to give an honest opinion and not offend you. Last edited by Toronto; 09-19-2012 at 10:20 PM..

09-08-2012, 08:05 AM	#18
woodpelletsmoker is one Smokin' Farker Join Date: 03-29-11 Location: Beijing,China Downloads: 0 Uploads: 0	As I said I need a partner financially strong. If one can not afford to a US$158 kit, he must not be a candidate

09-18-2012, 07:49 AM	#23
Squeal Appeal Got Wood. Join Date: 05-31-12 Location: Batesville, Ms. Downloads: 0 Uploads: 0	Wang the electronics that are being sold buy others are almost perfect in appearance and quality, as far as differance in operations,that is where your product is superior....If you can clean up your wires, the way the ends are fastened and don't use single wires . also ( Red wire for + Black for -) ... NEW Controller (not something with scratches an marks) The fan wiring needs to be secured to the fan, not just by being soldered, but secured with a bracket, Stay with the metal housing fan, not plastic, and come up with a light weight box encloser, Remember these aren't just installed and forgotten,,, the will be removed and installed alot, need to be more durable.........Main point ..If they are to be sold as new they need to Look Like New...A clean web site not all jumbled with all your products on 1 page, each item should have its on page for its information, setting, faqs,trouble shooting,etc...You also need a great customer service dept.... Instead of finding an investor, hire someone to be a rep. let them do what you need done,,Ship them your product, and let them take care of most of the problems... Just my 2 cents

09-18-2012, 08:13 AM	#24
Squeal Appeal Got Wood. Join Date: 05-31-12 Location: Batesville, Ms. Downloads: 0 Uploads: 0	Your shipping time is killing you !!!!!! You need a distributor or Rep. of your product here in the USA....but you need to perfect your products first... Back-up, refine, perfect. I think you should have spent more time with your products before offering them for sale, Needed better developement, and research.....In doing that, your products would be in better demand ....

09-22-2012, 03:26 AM	#27
woodpelletsmoker is one Smokin' Farker Join Date: 03-29-11 Location: Beijing,China Downloads: 0 Uploads: 0	I am doing NEW hosing of WOLF and TIGER. I am expecting ready in 4 weeks I am also think to place controller, fan inside a rainproof SS box. a 3" feet long stainless corregated pipe conencts pit and the SS box. There are two tye of SS box. SS Box #1, smaller, just or fan and controller. SS Box #2, bigger, holding fan, controller and Li-Ion battery

09-22-2012, 04:59 AM	#28
woodpelletsmoker is one Smokin' Farker Join Date: 03-29-11 Location: Beijing,China Downloads: 0 Uploads: 0	I have SS box with different sizes of flange, which can be used directky on Big Green,Kamodo, Offset. fan, controller, battery are placed inside the SS box. It looks neat from outside

09-22-2012, 08:15 PM	#30
woodpelletsmoker is one Smokin' Farker Join Date: 03-29-11 Location: Beijing,China Downloads: 0 Uploads: 0	Thanks! Youtube is blocked by China government. Can you send me a picture.