The BBQ BRETHREN FORUMS.


Forum Portal Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Brethren Banners
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, Equipment and just outdoor cookin' in general, hints, tips, tricks & techniques, success, failures... but stay on topic. And watch for that hijacking.


Reply
Thread Tools
Unread 05-24-2010, 03:38 PM   #5986
Doc Robinson
Found some matches.
 
Join Date: 04-26-10
Location: Fishers, IN
Downloads: 0
Uploads: 0
Default

Quote:
Originally Posted by fbody396 View Post
I did my burn today and the "red" liner is still there. The fire was HOT and it didn't do a thing to remove it. What do I have to do to get it out of there? This is my first post and my first UDS. Any help is appreciated.
Same here. I sanded it down a bit with a hand sander and a wire brush attached to a drill. I didn't get all of it. I decided, "**** it...if it ain't burning off and it ain't sanding off...it ain't cooking off." Besides, after a few cooks, it resides under a thick coating of seasoning. There are quite a few other things in my life that would kill me before some liner on my brisket.
Doc Robinson is offline   Reply With Quote


Unread 05-24-2010, 06:13 PM   #5987
schellter
Full Fledged Farker
 
Join Date: 07-26-09
Location: Farker Rd. Los Angeles, CA
Downloads: 0
Uploads: 0
Default

Quote:
Originally Posted by fbody396 View Post
I did my burn today and the "red" liner is still there. The fire was HOT and it didn't do a thing to remove it. What do I have to do to get it out of there? This is my first post and my first UDS. Any help is appreciated.
You could check the cost for having it sand blasted out.
__________________
Large BGE, Weber Genesis 650, WGA, Snow Creek foldable for camping, Red Thermapen
schellter is offline   Reply With Quote


Unread 05-24-2010, 07:37 PM   #5988
timmy7649
Full Fledged Farker
 
timmy7649's Avatar
 
Join Date: 04-06-09
Location: lafayette,oregon
Downloads: 0
Uploads: 0
Default

i done that and the sand blasters wanted $80 per drum. "f" that. so i took 2 days and wire wheeled it out. what a pain in the a**. good luck.
__________________
JUST A LITTLE U.D.S. webber 22.5"
timmy7649 is offline   Reply With Quote


Unread 05-24-2010, 08:05 PM   #5989
Meat Burner
Quintessential Chatty Farker
 
Meat Burner's Avatar
 
Join Date: 02-22-07
Location: Springfield, MO
Downloads: 0
Uploads: 0
Default

After a massive good burn, we sand the inside with 80 grid and then 220 sandpaper, wash it out, season with oil and it's ready to go. Worked out just fine so far. Like Doc said, at some point it isn't going to do any harm and will be covered with seasoning anyway. Good luck all!
__________________
my avatar swiped fatties from the plate....look how sorry he is.
________
Meat.

NB Bandera with mods
Weber 22 .5" x 2, 26.75" x 1
UDS x 3
KCBS CBJ
Created "The Great Spam Revelation of 2011."
www.bbq-brethren.com/forum/showthread.php?t=111155
Meat Burner is offline   Reply With Quote


Unread 05-24-2010, 08:53 PM   #5990
Johnny_Crunch
Babbling Farker

 
Johnny_Crunch's Avatar
 
Join Date: 04-03-10
Location: Cypress TX
Downloads: 0
Uploads: 0
Default

Quote:
Originally Posted by Doc Robinson View Post
Same here. I sanded it down a bit with a hand sander and a wire brush attached to a drill. I didn't get all of it. I decided, "**** it...if it ain't burning off and it ain't sanding off...it ain't cooking off." Besides, after a few cooks, it resides under a thick coating of seasoning. There are quite a few other things in my life that would kill me before some liner on my brisket.
What do drums cost in your area that this risk would be worth it? God knows what toxins a paint will put off. I know I felt like crap after breathing some of the smoke during my burnout. I would wait and find another drum.
__________________
J Crunch
Johnny_Crunch is offline   Reply With Quote


Unread 05-24-2010, 09:02 PM   #5991
pAT_13
Got Wood.
 
Join Date: 05-21-10
Location: Harpers Ferry, WV
Downloads: 0
Uploads: 0
Default

I don’t have the time to read all 400 pages of post and the search turns up to many results to help, so I will just ask…

I am looking for an unlined 55G drum with lid near Harpers Ferry, WV (25425). I have found only lined so far and they are about 1.5 hr away.

pAT_13 is offline   Reply With Quote


Unread 05-24-2010, 09:05 PM   #5992
fbody396
Got rid of the matchlight.
 
Join Date: 04-16-10
Location: Sanford, Florida
Downloads: 0
Uploads: 0
Default

I did exactly what you guys said to do and had a very successfull first cook. The slab of ribs, rib tips and the whole butterflied chicken all turned out FANTASTIC. I burned the barrel twice and then got inside with an air sander with 80 grit whick did an ok job. Then I took my grinder with a wire brush and knocked almost all the rest of that "red liner from Hell" out of there. Did the heavy duty detergent wash, rinse, etc. and then seasoned it with some left over peanut oil from my turkey fryer. I am thrilled with my new UDS and this website. I'm having a ball with it. Thanks again!!! Oh......i'll post pictures when I figure out how. Any help with that would be appreciated too.
fbody396 is offline   Reply With Quote


Unread 05-24-2010, 10:05 PM   #5993
Meat Burner
Quintessential Chatty Farker
 
Meat Burner's Avatar
 
Join Date: 02-22-07
Location: Springfield, MO
Downloads: 0
Uploads: 0
Default

Quote:
Originally Posted by pAT_13 View Post
I don’t have the time to read all 400 pages of post and the search turns up to many results to help, so I will just ask…

I am looking for an unlined 55G drum with lid near Harpers Ferry, WV (25425). I have found only lined so far and they are about 1.5 hr away.
No disrespect Pat, but you might want to take the time to go through the thread as there are many different ideas and ways to build a UDS. "I want it and I want it now" may not serve you well. Don't get discouraged, just do some research and you will be fine. Good luck bro!
__________________
my avatar swiped fatties from the plate....look how sorry he is.
________
Meat.

NB Bandera with mods
Weber 22 .5" x 2, 26.75" x 1
UDS x 3
KCBS CBJ
Created "The Great Spam Revelation of 2011."
www.bbq-brethren.com/forum/showthread.php?t=111155
Meat Burner is offline   Reply With Quote


Unread 05-25-2010, 06:39 AM   #5994
mgp03051
On the road to being a farker

 
mgp03051's Avatar
 
Join Date: 03-16-10
Location: Hudson NH
Downloads: 0
Uploads: 0
Default The Twins

just wanted to post a few picke of my UDS's
Attached Images
File Type: jpg DSC_5550.jpg (64.1 KB, 742 views)
File Type: jpg DSC_5551.jpg (64.8 KB, 735 views)
File Type: jpg DSC_5552.jpg (58.4 KB, 734 views)
mgp03051 is offline   Reply With Quote


Unread 05-25-2010, 07:36 AM   #5995
Novass
On the road to being a farker
 
Novass's Avatar
 
Join Date: 02-15-10
Location: Wylie texas
Downloads: 0
Uploads: 0
Default

That is a sweeeeet setup there bro



set set s
Novass is offline   Reply With Quote


Unread 05-25-2010, 07:39 AM   #5996
Novass
On the road to being a farker
 
Novass's Avatar
 
Join Date: 02-15-10
Location: Wylie texas
Downloads: 0
Uploads: 0
Default

What the h I hate my blackberry sometimes!
Novass is offline   Reply With Quote


Unread 05-25-2010, 07:48 AM   #5997
Novass
On the road to being a farker
 
Novass's Avatar
 
Join Date: 02-15-10
Location: Wylie texas
Downloads: 0
Uploads: 0
Default

With that much capacity you going to do comps.
Novass is offline   Reply With Quote


Unread 05-25-2010, 10:14 AM   #5998
BruceKWHP
Full Fledged Farker

 
Join Date: 01-15-10
Location: Oak Park, CA. Ventura County 91377
Downloads: 0
Uploads: 0
Default

more pics and details about the hinges please!
__________________
Bruce B.

Building "Robot", my UDS:
[URL]http://www.bbqbrethren.com/forum/showthread.php?t=83312[/URL]
UDS "Robot" (the easy smoke oven), CL CharGriller w/sfb, Stok Quattro
BruceKWHP is offline   Reply With Quote


Unread 05-25-2010, 12:58 PM   #5999
peppasawce
is one Smokin' Farker
 
Join Date: 07-08-09
Location: Columbia, Mississippi
Downloads: 0
Uploads: 0
Default

Kool Smokers
__________________
Getting A smoke Ring is were it's at Yall
peppasawce is offline   Reply With Quote


Unread 05-25-2010, 01:04 PM   #6000
moda253
On the road to being a farker
 
Join Date: 07-17-09
Location: Saint Paul, MN
Downloads: 0
Uploads: 0
Default

why are you breathing the smoke from your burnout? What's the point then?

Quote:
Originally Posted by Johnny_Crunch View Post
What do drums cost in your area that this risk would be worth it? God knows what toxins a paint will put off. I know I felt like crap after breathing some of the smoke during my burnout. I would wait and find another drum.
moda253 is offline   Reply With Quote


Reply

Tags
divided circle template, uds, ugly drum, ugly drum grill, ugly drum smoker

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ugly Drum Smoker ironslob Q-talk 2 09-19-2010 10:16 AM
Ugly Drum Smoker - Need Help Bartkowiakj Q-talk 10 06-18-2010 09:38 PM
One Ugly Drum Smoker Steve_B Q-talk 15 09-21-2009 10:32 PM
My (not-so) Ugly Drum Smoker. hav Q-talk 47 11-05-2008 02:30 PM
Ceramic Cooker Meets Ugly Drum Smoker - BUDCS - Concept Drum Discussion Hook_Line_and_Sinker Q-talk 9 04-26-2008 02:24 PM

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Loading



All times are GMT -5. The time now is 10:23 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.
no new posts