High Heat Brisket Help Needed Please...

Philly-QueMaster · 04-10-2010, 10:49 AM

Can anyone help a brother out? I put on a brisket flat (my first) on my drum this morning at 8:30am. Drum was running around 300-325* since I was going to try the high heat method. Well after about 2.5 hours the brisket had reached a temp of about 170* so I wrapped in a foil pan with some beef broth. The internal temp of the brisket is now showing 205* after only being on for 3.5 hours. Is this normal? Should I pull the brisket and hold it in a cooler? Please I need some help. Thanks everyone.

Rich Parker · 04-10-2010, 11:04 AM

Don't worry about the internal temp but if you can put the probe in it and it feels like "butta" pull it out. Works everytime!

Philly-QueMaster · 04-10-2010, 11:09 AM

Thanks Rich. I just went and probed it and most of it was tender but there were still some parts that still gave resistance. I'm going to leave it on for another hour and check again.

Ron_L · 04-10-2010, 11:11 AM

As Rich suggested, probe it in a few places to make sure your probe isn't in a fat seam. If it feels tender all over then cooler it.

Sent from my iPhone using Tapatalk

Dave Russell · 04-10-2010, 11:25 AM

Quote:

Originally Posted by Ron_L

As Rich suggested, probe it in a few places to make sure your probe isn't in a fat seam. If it feels tender all over then cooler it.

Sent from my iPhone using Tapatalk

For clarification purposes, Rich was emphasizing probing to check for tenderness. This has nothing to do with temp readings, as it's hard to go by temps when briskets are covered in foil and cooked at high temps.

Ron_L · 04-10-2010, 11:50 AM

Quote:

Originally Posted by Dave Russell

For clarification purposes, Rich was emphasizing probing to check for tenderness. This has nothing to do with temp readings, as it's hard to go by temps when briskets are covered in foil and cooked at high temps.

I'm confused by your quoting me with this response. I was also talking about probing for tenderness. Maybe I wasn't clear?

Philly-QueMaster · 04-10-2010, 11:55 AM

I understood.....I have probed for tenderness and it feels like butter throughout most of the brisket. I just pulled it off and put it in a cooler with towels to rest for an hour or so. I'm keeping my fingers crossed that it turns out good. It sure smells good! I'll post pics later on.

Ron_L · 04-10-2010, 11:59 AM

Quote:

Originally Posted by Philly-QueMaster

I understood.....I have probed for tenderness and it feels like butter throughout most of the brisket. I just pulled it off and put it in a cooler with towels to rest for an hour or so. I'm keeping my fingers crossed that it turns out good. It sure smells good! I'll post pics later on.

It's going to be great! It sounds like you did everything right. What did you use for a rub?

Rich Parker · 04-10-2010, 01:06 PM

Quote:

Originally Posted by Philly-QueMaster

I understood.....I have probed for tenderness and it feels like butter throughout most of the brisket. I just pulled it off and put it in a cooler with towels to rest for an hour or so. I'm keeping my fingers crossed that it turns out good. It sure smells good! I'll post pics later on.

Nice!

Let us know how it turned out.

04-10-2010, 10:49 AM	#1
Philly-QueMaster is one Smokin' Farker Join Date: 06-09-09 Location: Willow Grove, PA Downloads: 0 Uploads: 0	High Heat Brisket Help Needed Please... Can anyone help a brother out? I put on a brisket flat (my first) on my drum this morning at 8:30am. Drum was running around 300-325* since I was going to try the high heat method. Well after about 2.5 hours the brisket had reached a temp of about 170* so I wrapped in a foil pan with some beef broth. The internal temp of the brisket is now showing 205* after only being on for 3.5 hours. Is this normal? Should I pull the brisket and hold it in a cooler? Please I need some help. Thanks everyone.

04-10-2010, 11:04 AM	#2
Rich Parker Babbling Farker Join Date: 06-20-09 Location: Grand Rapids, MI Downloads: 0 Uploads: 0	Don't worry about the internal temp but if you can put the probe in it and it feels like "butta" pull it out. Works everytime! __________________ WSM and UDS - iBQ'n BBQ Team owner TheBBQSuperstore.com

04-10-2010, 11:11 AM	#4
Ron_L Moderator Join Date: 12-09-04 Location: Chicago 'Burbs Downloads: 0 Uploads: 0	Re: High Heat Brisket Help Needed Please... As Rich suggested, probe it in a few places to make sure your probe isn't in a fat seam. If it feels tender all over then cooler it. Sent from my iPhone using Tapatalk __________________ "Ron Rico, Boss. You can call me Captain Ron..." Save The Fatty! FEC-100/BWS Party/Memphis Pro SS/PBC/LBGE X 2/SBGE/Mini BGE/Nomad Pellet-matic/Good-One Model 42/WSM X 2/Cookshack Smokette 008/Weber Performer/Weber Gasser/Weber Kettle X 2/Weber Smokey Joe/WGA/UDS/Coffee Roasting Gasser and a pickle Remembering a friend

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
High heat brisket on WSM . . . need help	smokemonster	Q-talk	1	06-04-2011 10:01 AM
High Heat Brisket	GrillinFool	Q-talk	31	01-25-2011 02:12 PM
First High Heat Brisket (Pron)	redhawk	Q-talk	17	06-07-2010 08:41 PM
High Heat Brisket on the UDS	helljack6	Q-talk	13	08-27-2009 06:21 PM
High Heat / Low Heat combo brisket, with Pron of course	Saiko	Q-talk	15	06-29-2009 10:32 PM

04-10-2010, 11:09 AM	#3
Philly-QueMaster is one Smokin' Farker Join Date: 06-09-09 Location: Willow Grove, PA Downloads: 0 Uploads: 0	Thanks Rich. I just went and probed it and most of it was tender but there were still some parts that still gave resistance. I'm going to leave it on for another hour and check again.

04-10-2010, 11:55 AM	#7
Philly-QueMaster is one Smokin' Farker Join Date: 06-09-09 Location: Willow Grove, PA Downloads: 0 Uploads: 0	I understood.....I have probed for tenderness and it feels like butter throughout most of the brisket. I just pulled it off and put it in a cooler with towels to rest for an hour or so. I'm keeping my fingers crossed that it turns out good. It sure smells good! I'll post pics later on.