scottjess
Knows what a fatty is.
Hi guys.
Was wondering what temp gauges you would recommend installing on a UDS.
Thanks,
Was wondering what temp gauges you would recommend installing on a UDS.
Thanks,
I only use only digital at grate level.
I sure like SpiceWine Temp Gauges....
he's a Brethren, if you were unawares...
spot on now for almost six years.....
and,they look cool too....
I don't know who the MFG is on that gauge N8Man but I have the same one and it was labeled Old country Smoker Co. on the pkg. irregardless it's a good un
If there is a hex fitting between the stem and the dial, they are adjustable. While the stem is in boiling water, turn the dial while holding the hex till the needle points corectly.I also use the 12" turkey fryer thermos. I actually have 2 in mine, one about 1/2" under each cooking grate. They're cheap, easily replaced and I've found them pretty accurate.
I also use the 12" turkey fryer thermos. I actually have 2 in mine, one about 1/2" under each cooking grate. They're cheap, easily replaced and I've found them pretty accurate.