Discada Pron....

Man Bob, tradition and family history means a lot to me, but, that disc is a real treasue, and you appear to be able to cook pretty good on it too. When I first read the thread, somewhat carlessly, I thought you wrote that it 'is your dad's, but he is old and it will be yours soon'. Don't know how that popped into my head.
 
Bob, my grandparents had a little cottage on a lake.
The dock rested on concrete blocks that you had to put in every spring every fall.
The beams of the dock rested on the stacked blocks.
Then somebody mfg aluminum pipes with a cross bar that took the place of the concrete blocks.
They were over a hundred bucks apiece.
I took some discs, inverted them and welded them to some pipe that fit inside the disk hole in the center. I welded the cross a bar to the 2 upright pieces of pipe and that held the dock.
Much easier to carry an H shaped piece of steel out in the water than say 10 concrete blocks for a section of dock.
I took care full measurements before I did all the cutting and welding and they turned out great, price probably ten dollars a piece for materials and welding rod.
The disks were inverted, that kept them from sinking down into the sand at the lake.
The dock was more stable on the home made supports than on the cement blocks.
Makes perfect sense now. Amazing the different uses for these old discs. Too cool!
 
Man Bob, tradition and family history means a lot to me, but, that disc is a real treasue, and you appear to be able to cook pretty good on it too. When I first read the thread, somewhat carlessly, I thought you wrote that it 'is your dad's, but he is old and it will be yours soon'. Don't know how that popped into my head.
I edited the thread early on. What I was wanting to say was that is has been handed down over the generations and my dad says he's gonna hand it down to me one day too. Then hopefully I can hand it down to my son one day also.
Kinda feels like my Grandad is there, looking over our shoulder, when either me or my dad use it.:wink:
 
Just saw this and I really have to say that I've seen lots of disco cooking since I was a kid but DAYUM that looks farking awesome! I really need to fire up mine and get cooking. Now that warm weather is in the near future I've got the craving for some tacos. Good job Bob the seasoning on that thing is awesome!
 
Thanks everyone. Gary, my dad keeps it wrapped up in a cloth sack and a few plastic bags and tucked away where the water and moisture can't get to it, but yes, we do give it a thin coat of cooking oil once it has been cleaned and ready for storage.
A recommended method for cleaning if it has lots of burned or stuck on food is to fill it up with water and bring it to a boil. Ther hot water will loosen any particles at that time and a quick once over with a sponge or towel will clean it right off.
Al--I had to take advantage of the weather. We had highs in the mid 70's, no wind, gorgeous. Perfect day for discada.

Thanks again.

Bob
 
The age and history of the disc... truly, the most genuine and touching story I have ever seen posted on here by anyone.

I KNOW that disc cooks better than modern ones.... the old ones carry heat so much better.

I love seeing the process too.
 
Just spent the last hour reading the thread...man do I have a bunch to learn...wow, nice spread and nothing like a family tradition! cool beans!
 
Bob, nice to see this thread. It's good to know that there's still some folks out there that know "Discada" is actually a dish, and not necessarily the cooking vessel. Last discada I had was in Mexico, and instead of hot dogs she used Vienna sausage! Whatever works. I was told that the dish came about as a way to feed a lot of people fairly cheaply. It's also pretty darned delicious.

On mine I have some welding beads added around it near the edge as seen below. These are great when using it to do things like fry catfish and such, as you can drag things up to drain without having to worry aobut them sliding back down into the oil.

2621702690055647610S600x600Q85.jpg
 
chit!!!! thats smart

On mine I have some welding beads added around it near the edge as seen below. These are great when using it to do things like fry catfish and such, as you can drag things up to drain without having to worry aobut them sliding back down into the oil.

2621702690055647610S600x600Q85.jpg
 
Bob, nice to see this thread. It's good to know that there's still some folks out there that know "Discada" is actually a dish, and not necessarily the cooking vessel. Last discada I had was in Mexico, and instead of hot dogs she used Vienna sausage! Whatever works. I was told that the dish came about as a way to feed a lot of people fairly cheaply. It's also pretty darned delicious.

On mine I have some welding beads added around it near the edge as seen below. These are great when using it to do things like fry catfish and such, as you can drag things up to drain without having to worry aobut them sliding back down into the oil.

2621702690055647610S600x600Q85.jpg

Discada is a term that gets confused quite often. It's really just a Mexican Wok. The possibilites are endless. Discada can be made from just about anything. We've even done seafood versions using the Seafood Mix you can get at Sam's etc, that has squid, shrimp, octopus, etc. My BIL's version also has mushrooms and sliced baloney. And it's great for parties, as you said, it feeds lots of people quickly. They are great for frying. My BIL makes a MEAN whole fried tilapia and black bass on his disco. We also like to use if for pork carnitas.
That's one nice disco you got there. I've always been a fan of the "horse shoe" handles.

chit!!!! thats smart

RIGHT? That's is a way cool little feature. I'm with Funk on this one, really "smart" feature.

Thanks again.

Bob
 
Your Article

Bob, will you post your article when its complete? I'd love to learn more about discada cooking. Very nice pron. Thanks
Paperboy98

Working on a article on Plow/Harrow Disc Cooking and, well, needed pron. Only way to get pron, is to cook up some pron!
Well, first I noticed that I'm running out of space. I may need to convince Mrs. Brisket that we need a bigger home as "MY" children are outgrowing their current space. I fired up Q Can II and other than a slight leak around the lid, it puffed away like a Drum should.
4414911010_d7762952c3.jpg

I wanted to pay a little tribute to my late Grandfather and use his disc/disco to do the cooking. It's currently my dad's but he's told me it will be mine some day.
I talked to my dad and he gave me some history on the disc. My dad remembers when my great grandfather gave it to my grandfather back when my dad was very young. It's origins go back to Chihuahua Mexico. It was a tool that was used daily to make meals.(no indoor stoves much less gas in the home) It was commonly set upon a 5 gallon steel bucket with a door cut in the bottom and it was fed with a wood fire. The metal on this disc is much closer to cast iron than just steel. It takes very little heat to get it hot and keep it there. I use way more heat with the steel disc that I have. My dad is 60 and says that it's easily close to 100 years old. A true piece of history. He also said it's very likely that it was actually used at some point by my great grandad to plow his fields.
4414143713_5c282ed552_b.jpg

4414911540_5c1b144159_b.jpg

4414911890_8789854db4_b.jpg

The ingredients. Basic discada. Beef, chicken, turkey, chorizo, weiners, polish sausage, garlic(LOTS), onion (white and long green), radish, japs, yellow squash, BACON!, pepperoni, tomato, cilantro.
4414144621_0444c833cf_b.jpg

Beer is an ingredient. My grandad, dad, have used it, I'm not going to break tradition.....no way, no how!
4414912484_897525cef0_b.jpg

Let the rising steam heat the torts.
4414145267_9fe4f0e5e9_b.jpg

NJOY!! Some salsa de arbol, and Mrs. Brisket's chicken salad and guac! Hot Dang it was good!
Had some discada with eggs for breakfast.............MmMMMMmmMmMMmmmmMMmmm!

Bob
 
Back
Top