Quote:
Originally Posted by SmokerKing
http://turnerbiodiesel.com/8_gallon_55_gallon_drum_cone
It does need modification. The cone top sits directly on top of the rim of the drum.
At the bottom of the cone, you need to spot weld a 1/4" rod around the perimeter. Once that's welded, a 1" x 1/8" flat bar needs spot welded to the rod to capture the lip of the drum.
|
Thanks
BTW, love the Fairbanks emblem... Nice addition. Makes me think I have to start hunting for an old lister or marshal or... emblem.
Maybe BSA. Yup, that's it. BSA.
