Fire box peeled on meadow creek during season.

Sickboy579 · May 12, 2018

So... picked up my new Ts120p Wednesday. Friday nite let’s season it up!
I decided for once in my life to read the operators manual and follow their seasoning directions to the t. As if it was gospel. Hit the inside with pam. Light 10# of charcoal, vents wide open per their instructions. Calibrated my thermometers to the readings on my “smoke”. Soon after lost 1/3 of the paint off my fire box. Sick to my stomach. What do y’all think... is it unreasonable to expect my paint to stay on the fire box of a $5k smoker? I don’t think it is... I have other mc products never had trouble... I’m going to assume the paint didn’t adhere properly? Maybe the metal was not prepped correctly? Comments? Concerns? Cheap shots? What do you think?

In the end... I mean, it ran nice, the cc seasoned nice. Did a fatty of chorizo, a bacon wrapped cheese filled fatty of chorizo and a few ABT’s... all delicious.

I’m awaiting to hear what Lavern and the boys from mc have to say about the paint as I find it unacceptable, lord knows they cost more than everyone else... so I expect the highest of quality from them.

SmittyJonz · May 12, 2018

Thats why PJTexas said to run at 200-250* for a couple hours to cure the paint in the other thread.

Sand it off, wipe with some Denatured alcohol and spray paint it with Rustoleum BBQ Paint - part of Normal offset maintenance.

SmittyJonz · May 12, 2018

In future when Firebox gets surface Rust, sand it , treat it with Rust stop/metal treatment type stuff n repaint. Once - twice a year.......

https://www.amazon.com/Ospho-605-Me...&sr=8-3-fkmr3&keywords=Rusty+metal+paint+prep
.

Sickboy579 · May 12, 2018

Mc says take it to 300* then mist it... repeat. I can’t imagine that extra 50*. In the cc is going to take out the 1200* paint on the fire box. Well either way.... no more reading the directions lol

SmittyJonz · May 12, 2018

Kinda Sucks cuz it's New but Firebox paint maintenance is Normal.
Some have success"Seasoning" the outisde with oil as it cools down After a cook but you gotta do it pretty much every cook for a while.

pjtexas1 · May 12, 2018

I agree with paying that kind of money and expecting a better product. I'd be pissed if that happened to a $500 offset on the first fire. The paint on my 30 year old offset looked better than yours. It may have had surface rust but the paint never came off in sections. Tuned into to see what MC will do.

Sent from my SM-G955U using Tapatalk

TuscaloosaQ · May 12, 2018

I can tell you only this...... it was never sandblasted...

Sickboy579 · May 12, 2018

Like any offset, of course I expect maintenance and touch ups on the box but, not paint peeling off in sheets on the first fire.

Yeah, looks like the hit it with a flap disc or something

SmoothBoarBBQ · May 12, 2018

For the prices Meadow Creek charges their Quality Control should certainly be more effective. While I will agree that this is normal maintenance on a firebox after a while it certainly shouldn't have peeled off after the first fire.

I am also interested to see how Meadow Creek handles this complaint. Good luck and I hope they take care of you.

Sickboy579 · May 16, 2018

Emailed mc about the issue. Melvin, the owner called me and sufficiently resolved the issue. Stand up guy, stand up company.

OklaDustDevil · May 16, 2018

Sanding and touching up FB paint certainly is normal maintenance after a few years of sittin outside in the weather. But I totally disagree that it's normal maintence when the paint is sheeting off like yours after you fire it up the first time. That is a manufacturing defect, and IMHO you should expect them to fix or replace it at their cost.

Zin · May 16, 2018

Wow that sucks, i would demand they replace the whole unit. Looks like it was not even sand blasted, but not to take any chances that the metal they used might have been bad. I would only except a new one or my money back.

Rockinar · May 17, 2018

I got impatient when seasoning my Klose and cranked it up. The paint got soft but never peeled off like that.

wbzipf · May 17, 2018

Sickboy579 said:
Emailed mc about the issue. Melvin, the owner called me and sufficiently resolved the issue. Stand up guy, stand up company.

Thant’s good to hear. What exactly are they planning on doing to fix it?

-Chris- · May 17, 2018

With all of the VOC regulations, paint just sure isn't what it used to be. looks like some surface contamination that was not washed off before spraying.

Chris

scott3705 · May 17, 2018

Same thing happened on my lang on the first fire. Admittedly, my fire was way too. It was a long time ago, but I think I was up over 350

Wildaggie202 · May 6, 2020

Ive read of many guys that sand them down and season the firebox like a cast iron pan. I have seen a few pictures. When done, they look real nice. One guy did it with mineral oil. I just got mine and the paint hasn't peeled yet, but i see it coming.

CptKaos · May 6, 2020

well he has had almost 2 years to take care of it. hahahaha

Piggysquealers · May 6, 2020

The metal expands and contracts. It will flake off. Have a wore brush ready and brush off and rust or paint flakes and spray the firebox with pam. Lemon pledge on the cooker outside and Pam on the firebox. She'll look great

Sent from my SM-G977U using Tapatalk

Sid Post · May 7, 2020

Yes, this thread is a bit old. It would be nice to know how things turned out though, the OP seemed happy with MeadowCreek's response.

Fire box peeled on meadow creek during season.

Knows what a fatty is.

Attachments

somebody shut me the fark up.

somebody shut me the fark up.

Knows what a fatty is.

somebody shut me the fark up.

somebody shut me the fark up.

Babbling Farker

Knows what a fatty is.

is Blowin Smoke!

Knows what a fatty is.

is one Smokin' Farker

is Blowin Smoke!

is Blowin Smoke!

Full Fledged Farker

Knows what a fatty is.

Got Wood.

MemberGot rid of the matchlight.

is one Smokin' Farker

Full Fledged Farker

is Blowin Smoke!

Similar threads