HoDeDo
Babbling Farker
- Joined
- Feb 19, 2006
- Location
- Kansas City
Whats the price on these, with the discount? I need one
KCK.com has them in stock now... I believe he will have a brethren discount on them, like his other equipment and accessories.
How did you end up setting up the Tailgator?
discount? I need to go to his store, been meaning to, but, you know,,, never the time, maybe a CS demo
Does Bobby have Tru Tel gauges that fit the tailgator? I almost tapped a bigger hole in mine today to drop in my 4" illuminated dial. Then I thought I'd better ask if there was something that could drop in before I go bastardizing a $700 stainless steel cooker.
I think he has a few different ones that fit. None with a 4" dial however.
You can see the one we installed in the tailgator I use. He seems to like those better than the small tel-tru's (these have a bigger range)... but I imagine he can get whatever you want.
Cooking 300 and below... I'm at about a 10 degree swing. at 400 and above it is about 15 deg. swing. Works very well, considering there is no fan control. Having said that - an analog oven thermostat.... or the setup Dano has done with the fuzzy logic controller would likely yeild similar results. I have been playing with a PID controller myself... and need to figure out the resistence for a secondary trigger for the fan. I dont ever want it to kick off.... just down slightly. Once I figure that out... then I think it will be dialed in very tight.