The BBQ BRETHREN FORUMS. - View Single Post

colonel00 · 09-01-2011, 04:18 PM

I guess I should also mention that thus far most everything was built from salvaged material. I had access to some store fixtures that I used for the side brick walls and the floor. The tube steel was from store fixtures too. The rests of the frame is from bed rails except two 1"x1" sections of angle I had to buy. I did have to purchase the aluminum angle and channel as well as the brick paneling for the doors. However, so far I am really only in for $150 or less. Probably closer to $125.

09-01-2011, 04:18 PM	#2
colonel00 Quintessential Chatty Farker Join Date: 06-03-10 Location: Shawnee, KS	I guess I should also mention that thus far most everything was built from salvaged material. I had access to some store fixtures that I used for the side brick walls and the floor. The tube steel was from store fixtures too. The rests of the frame is from bed rails except two 1"x1" sections of angle I had to buy. I did have to purchase the aluminum angle and channel as well as the brick paneling for the doors. However, so far I am really only in for $150 or less. Probably closer to $125. __________________ Brad [URL="https://www.instagram.com/bradsimmons00/"]Some of my photos on Instagram [/URL] [SIZE=1][I][COLOR=red]Proud owner of the PentaZero[/COLOR][/I][/SIZE] :whoo: [B][COLOR=red]WWWWFBBQADD[/COLOR][/B] [B]0 out of 1 members found this post helpful[/B] :thumb: “I dream of a better tomorrow, where chickens can cross the road and not be questioned about their motives.” ― Ralph Waldo Emerson