Quote:
Originally Posted by Hozman
Well with all the talk I had to stop by a lowes today and take a look for myself. Like some others have said whoever they had put it together did a poor ass job. There was a lot of play in the slide vent intake plate. Not sure if that is normal or lack of being put together as it should be.
|
The sliding air vent comes pre-assembled on the ash pan. It does probably need a little work to seal it up tightly. I'm going to experiment on my next cook with some high heat tape that I have to seal it off around the edges. If that generates better air flow control I will remove the vent and seal it up with some high temp rtv silicone.