Todays PBC experiences

BBQchef33 · Feb 18, 2013

---k--- said:
Back on topic,
Phil, did you have any worries about loosing your ribs since you didn't foil? I'm not a foil'er. I've been wondering about how best to do ribs and butts. I figured both would get pulled off the hooks and onto the rack. But, that sort-of defeats the space benefits of the PBC and I might have to cross my fingers and hope I have enough charcoal for a large butt.

Also, when you say that the ribs are a very different product than when foiled and sauced. Was there something different about unsauced ribs on the PBC than from unsauced on other cookers. Or was this just a sauced vs. unsauced comment?

I hooked the ribs under the 3rd(maybe 4th) rib, so they were on there plenty tight. there was no risk of them tearing off the hooks.

now, im not a food scientist, and i could be wrong, but I dont thing the pbc(or uds) has the same cooking environment as an offset.. and IMO, i think its the lower humidity levels and the radiant heat(and higher direct temps) in the drums that mad eit different. The bark on the ribs was beautifully dry and crunchy with a deep mahogony color.. it was just too nice to foil, start steaming and mess up. Only time i got bark like that in the offsets was to cook at higher temps >310. The ribs had a different texture also, very tender, pulled off bones clean, they were just not a soft(does that make sense?) I try not to foil ribs when they are for home. I like dry rub, with light to no glaze. The ribs on the PBC were crunchy, not sticky and that was good for me.

i havent done one yet, but when i cook a butt on the pbc, im going to tie it up with butchers twin, form a bit of a net and hook it with the twine.

flyingbassman5 · Feb 18, 2013

---k--- said:
Back on topic,
Phil, did you have any worries about loosing your ribs since you didn't foil? I'm not a foil'er. I've been wondering about how best to do ribs and butts. I figured both would get pulled off the hooks and onto the rack. But, that sort-of defeats the space benefits of the PBC and I might have to cross my fingers and hope I have enough charcoal for a large butt.

Just to add in with what Phil noted..

I'd be more worried about losing the rack of ribs if you DID foil them. The outer layer of bark is what I think really helps keep the ribs intact and gives it integrity when hanging on the hook. Foiling the ribs really hurts the bark and would make it difficult to get the ribs back on the hook and stay there. I've done a couple racks of ribs on my Pit Barrel and never foiled the ribs. Still turn out great.

About the butts..(this kind of goes out to Poobah too) I did a 9lb shoulder a few weekends ago and had no issues at all with it being too heavy or needing any other kind of support. I used four of the hooks just to be sure it would stay but could've gotten away with 3 or maybe even 2. However, I didn't leave it on the hooks until it was done. It stayed on the hooks to 165 IT and then was foiled and placed on the grate until 200 IT.

Just my thoughts for the stew..

BBQchef33 · Feb 18, 2013

isnt the grate too close? and its starts to grill the meat?

flyingbassman5 · Feb 18, 2013

BBQchef33 said:
isnt the grate too close? and its starts to grill the meat?

As in the pork shoulder? Nope, not when the grate is sitting on the table across the patio! :laugh:

I'm an adrenaline junkie and like taking risks! :mrgreen:

---k--- · Feb 18, 2013

BBQchef33 said:
isnt the grate too close? and its starts to grill the meat?

But, the grate is further than the tips of the ribs when they are hanging... none of it makes sense to me.

BBQchef33 · Feb 18, 2013

yeah, i meant putting the pork butts on the grate for hours to finish.

--k--- I dont get it either, but even thought he bottom 1 or 2 ribs get grilled somewhat, the rest of the rack is fine. i would guess its the surface area exposed to direct heat when laying flat as opposed to it hanging vertical.

flyingbassman5 · Feb 18, 2013

BBQchef33 said:
yeah, i meant putting the pork butts on the grate for hours to finish.

Wow. Totally different frame of reference on that. Let me change my answer...

Yes, the grate is close but I didn't have a problem with the shoulder burning on the bottom side or overcooking. Not sure why or why not so that is open for debate.

Sorry about the confusion :wacko:. These long night/long day combos start messing with your comprehension a bit.

Pitmaster T · Feb 19, 2013

Sounds more like you need to fashion a shelf above the fire basket in that thing and use the pizza stone as a diverter like the UDSs usually have. I myself need to do that on my uds. If I am not careful I burn **** up because once I remove my lid those twin one inch inlets get to acting like a forge.

I hate to do this because I painted the damn think and it looks like a 57 Bel Aire.... I hate to drill another set of holes.

Anyway.. a nice diverter mod would be good on that PBC. If ya don't wanna drill holes get some small chain from HD and hang a low shelf from your hangers and support the stone or a Potted Plant thingy... forgot what they are called... you set the pot on it to collect any water drips... they are shallow.

BBQchef33 said:
Here's my take on this. When I first got the spice wine I was cooking in front of the house, and I with a chimney on the sidewalk. I left it there for 5 or 10 minutes to get hot, it was a full chimney. While inside the trailer prepping the meat I heard a loud explosion and looked up just in time to see the chimney launch off the sidewalk and all the coals inside it fly all over the street and lawn. There was a divit on the sidewalk the width of the chimney and about an inch deep. It seems the heat coming out of the bottom of the chimney cause this concrete to react. Now granted that I doubt the bottom of a PBC or UDS gets as hot as the bottom of a chimney but I don't know for sure where the line is that would cause the concrete to react like that. Im pretty sure that the entire escapade is documented here in the forum and someone, I believe it was Mark came up with a reasonable explanation. With that being said I think I'm going to get a pizza stone or something along those lines to put under the PBC. For the most part it will be left in my pit area which has a pea stone base which would be ok, but right now until the snow melts its right outside my door on the deck. The Green Egg plate setter worked perfectly but I prefer to have that inside the egg instead of sitting on the floor on the deck. A pizza stone is a cheap alternative.

Sent from my DROIDX using Tapatalk 2

Todays PBC experiences

BBQchef33

Grand Poobah and Site Admin

flyingbassman5

is one Smokin' Farker

BBQchef33

Grand Poobah and Site Admin

flyingbassman5

is one Smokin' Farker

---k---

is One Chatty Farker

BBQchef33

Grand Poobah and Site Admin

flyingbassman5

is one Smokin' Farker

Pitmaster T

Babbling Farker

Similar threads